Job Summary

Under general supervision, applies appropriate welds to fabricate or repair compactors, containers and carts.

II. Essential Duties and Responsibilities

To perform this job successfully, an individual must be able to perform the following tasks.

• Performs minor repairs and applies basic welding processes.
• Repairs compactors, containers and carts.
• Performs preventive maintenance inspections, diagnostic and repair of electrical and hydraulic systems on compactors.
• Qualified in the welding processes such as arc welding, gas welding, aluminum welding, brazing, and soft soldering on a variety of materials.
• Conducts safety checks on compactors and containers.
• Completes required paperwork utilizing fleet maintenance software program associated with repairing compactors and containers, documenting parts usage, and accounting for repair times.
• Assists senior welders in the completion of project work.
• Performs service calls for compactor repair.
• Performs related work such as flame cutting, bending, forming, beveling, notching of metal and plastic parts.
• Performs all work within Standard Repair Times (SRTs).
• Works from prints, drawings and verbal instructions.
• Performs standard layouts and set-ups of dimensions and tolerances.
• Utilizes standard shop hand tools, measuring devices and equipment.
• Performs other maintenance related work as required.
• Maintains a clean, safe work area in compliance with Corporate / OSHA Standards.
• Performs all work in accordance with established safety procedures.

III. Supervisory Responsibilities

This job has no supervisory duties.

IV. Qualifications

The requirements listed below are representative of the qualifications necessary to perform the job.

A. Education and Experience

• Education : Not required.
• Experience : 2 years of relevant experience.

B. Certificates, Licenses, Registrations or Other Requirements

Required : Valid drivers license.

C. Other Knowledge, Skills or Abilities Required

• Basic skills in welding techniques; knowledge of safety procedures and practices necessary while operating or repairing compactors, containers and carts;
• skill in operating tools equipment, parts and procedures utilized during the repair and servicing of compactors, containers and carts;
• skill in repair of special purpose equipment; ability to perform repairs on a variety of compactors, containers and carts;

and ability to utilize fleet maintenance software program may be required.

V. Work Environment

Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.

• Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day;
• Required to exert physical effort in handling objects less than pounds occasionally;
• Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) rarely;
• Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements rarely;
• Normal setting for this job is : repair / maintenance shop.

Note : The level of physical effort may vary from site to site and in some cases be greater or lesser than documented here.

Benefits

At Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability.

As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days.

Please note that benefits may vary by site.

Title : Welder

Location :

Dallas, TX, US, 75212

• job-location.job-location-inline display : inline; Division : Maintenance Job ID : 10458 .buttontexte2d2d6ef36473edf a border : 1px solid transparent;
• buttontexte2d2d6ef36473edf a : focus border : 1px dashed #f58021 !important; outline : none !important;

its whats inside that counts

Theres more to CMC than our steel products and the buildings, structures, and roads they go into. At CMC, its the people inside our recycling centers, fabrication plants, steel mills and offices that make us who we are as a company.

Our success comes from finding, retaining, and supporting the highest quality talent by offering :

• Day 1 benefits coverage with low cost medical, vision, dental
• Paid-time off and vacation starting Day 1
• Competitive compensation and bonuses
• Company-paid Lifestyle fund, life and disability insurance
• Company matching 401(k) plan
• Employee stock purchase plan
• Training and advancement opportunities

Why This Job

CMC provides an excellent opportunity to learn the steel industry and grow in your career. Whether you will spend your day in an office cubicle, operating a crane or running the melt shop at one of our mills, at CMC, youll get the training and support from your team that you need to excel in your role and reach your full potential.

What You'll Do

• Any other tasks as assigned by supervisor
• Demonstrates dependability in attendance, work completions, and flexibility to meet business needs
• Effectively communicates with co-workers and customers in a positive manner
• Keeps equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance;

calling for repairs when needed

• Maintains work area and equipment in a clean orderly condition and follows safety regulations
• Prepares and maintains accurate records of services and repairs

What You'll Need

• Ability to lift up to 50 lbs
• Must be able to stand for significant lengths of time in an industrial environment with exposure to all elements of weather
• Ability to work as a team player in a fast-paced environment, with a strong work ethic and attention to detail to find root cause for equipment failures
• Ability to work overtime as necessary outside of normally scheduled shift with little or no advance notification
• Capable of performing a wide range of physical activities which include pulling, reaching, bending, climbing and kneeling
• Experience with hydraulics / pneumatics, wiring, and working on heavy equipment
• Proficient in reading and understand technical documents, diagrams, and service manuals
• Valid drivers license
• Welding, cutting, and fabrication skills

Your Education

High School Diploma, GED, or equivalent experience is required

We are Commercial Metals Company, a Fortune 500 company with a family feel thats already part of your life. Our steel products have been supporting structures in more than 20 countries for over 100 years.

And the secret to our success? Weve built our legacy by assembling a team of innovators and doers to tackle some of the most challenging problems facing our world over the last 100 years but were just getting started.

If youre ready to reimagine ways to make the steel industry more sustainable, reinforce the bridges and roadways connecting our communities, and do meaningful work, youre ready to join CMC.

Apply today and start moving your career and our world forward.

Welder#N / A

TEAM provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Quality Ironworks has an immediate opening for Mig Welders at our headquarters in Dallas, TX.

Duties and Responsibilities include, but are not limited to :

• Manufacture and fabricate finished metal products-MIG Welding
• Follow blueprints to meet product specifications
• Calculate material measurements to verify specifications
• Conduct tests to evaluate weld quality and tolerance
• Material Handling

Qualifications :

• Previous experience in welding, manufacturing, or other related fields
• Familiarity with miller welding tools and procedures using the .035 MIG process.
• Familiarity with engineering blueprints and schematics (sometimes it'll be a shop drawing.)
• MUST be able to read WELDING BLUE PRINTS. Test will be given.
• Must be able to read TAPE MEASURE to 1 / 32?
• Ability to handle physical workload and lift 25-75lbs regularly.
• Fitter Welder a Plus

As a member of the team, you can expect :

• Complete benefits package Including health, dental and vision insurance
• 9 paid holidays
• Paid Vacation after 1 year of employment
• Opportunity for Advancement many of our managers were promoted from within!
• Team environment Enjoy working with a supportive group of employees that look out for one another.
• Job stability You can feel secure in your job because of the company’s agenda of predetermined projects.

WELDER - SANITATION

BRIEF DESCRIPTION :

The purpose of this position is to provide assembly and repair for metal structures, such as dumpsters, hydraulic systems and sanitation trucks, used in the collection and disposal of waste.

This is accomplished by the use of welding equipment for cutting, joining and brazing of a variety of metals and metal parts in repair, maintenance or fabrication tasks and minor automotive mechanical repairs.

Assignments are received in oral or written form and are occasionally accompanied by blueprints, drawings or specifications.

Work is performed with considerable independence and under general supervision. Work is reviewed for timely completion of work assignments and quality of work.

Performs related work as required.

LICENSING REQUIREMENTS :

Driver’s License Required YType - BEndorsements N - Tanker

Individuals who do not currently have a Class B N license will be enrolled in the ELDT program. They will have 30 days from the start of the online class to complete the Commercial Learner's Permit (CLP) and 60 days to complete the Behind the Wheel training.

The Commercial Driver's License must be provided to the City. No individual will be given more than 1 business day prior to the end of their probation to meet this requirement as a condition of employment.

and this provision will only be implemented for reasons out of the control of the individual as determined by the department.

ESSENTIAL FUNCTIONS :

Note : This information is intended to be descriptive of the key responsibilities of the position. The list of essential functions below does not identify all duties performed by any single incumbent in this position.

Additionally, please be aware of the legend below when referring to the physical demands of each essential function.

S)Sedentary(L)Light(M)Medium (H)Heavy X(V)Very Heavy

Exerting up to 10 lbs. occasionally or negligible weights frequently; sitting most of the time.Exerting up to 20 lbs. occasionally;

10 lbs. frequently; or negligible amounts constantly; OR requires walking or standing to a significant degree.Exerting 20-50 lbs.

occasionally; 10-25 lbs. frequently; or up to 10 lbs. constantly.Exerting 50-100 lbs. occasionally; 10-25 lbs. frequently;

or up to 10-20 lbs. constantly.Exerting over 100 lbs. occasionally; 50-100 lbs. frequently; or up to 20-50 lbs. constantly.

Code Essential Functions

1LRegular and reliable attendance in compliance with given schedules is a mandatory requirement of this position. Schedules may be subject to change with or without advance notice

2HRepairs trucks and equipment and completes special projects by laying out designs, fabricating parts, and welding to trucks and equipment.

3HRepairs containers by fitting and welding to repair, installing new doors and lids, installing hinges, modifying doors and lids for installations, loading and unloading vendor materials, and completing repairs.

4HCompletes field repairs in alleys and on customer locations by repairing doors, hinges, gates and lift pins.

5HFitting and joining, fabricating, and repairing metal and other welding material by applying appropriate welding techniques in accordance with product specifications and production schedules.

JOB REQUIREMENTS :

Description of Minimum Job Requirements-

Formal EducationWork requires knowledge necessary to understand basic operational, technical, or office processes. Level of knowledge equivalent to four years of high school or equivalency.

ExperienceOver one year up to and including two years.

PRIMARY WORK LOCATION - Shop and Outdoors