Hohmann & Barnard Inc

Come join a team where People make the difference!As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent.

Set up and operate various welding machines. Duties include supplying or holding materials or tools, and cleaning work area and equipment.

Responsibilities include, but are not limited to :

ESSENTIAL FUNCTIONS

Essential Functions Statement(s)

• Operate welding machinery used in the production process.
• Examine products to verify conformance to quality standards.
• Observe equipment operations so that malfunctions can be detected.
• Lift raw materials, finished products, and packed items, manually or using hoists.
• Verify counts on finished products to determine if product orders are complete; mark or tag identification on parts; load and unload items from welding jigs, machine stands, & turntables.
• Assist helpers performing duties of lesser skill, giving time constraints to all work procedures thru out the manufacturing process, and cleaning work areas and equipment.
• Clean and replace expendable machine parts as needed.
• Record information such as the number of products tested, production readings, and dates and times of product production.
• Start machines or equipment in order to begin production processes.
• Separate products according to weight, grade, size, and composition of materials used to produce them.
• Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
• Remove products, machine attachments, and waste material from machines; pack and store materials and products.
• Tie products in bundles for further processing or shipment, following prescribed procedures.
• Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks.
• Signal coworkers to direct them to move products during the production process.
• Prepare raw materials for processing; measure amounts of products, length of articles, to ensure conformance to specifications;

read gauges and charts, and record data obtained

• Pack products and product parts during processing; separate defective products for reprocessing.
• Clean work areas, machines, equipment, vehicles, and products.
• Wear many hats and may be asked to assist with other areas in the shop / office / warehouse.

POSITION QUALIFICATIONS

Competency Statement(s)

• Accountability - Ability to accept responsibility and account for his / her actions.
• Accuracy - Ability to perform work accurately and thoroughly.
• Adaptability - Ability to adapt to change in the workplace.
• Detail Oriented - Ability to pay attention to the minute details of a project or task.
• Organized - Possessing the trait of being organized or following a systematic method of performing a task.
• Professional Professional attitude and behaviors in the workplace and when representing the company outside of the workplace.
• Reliability - The trait of being dependable and trustworthy.
• Respect Respect for oneself and for others.
• Responsible - Ability to be held accountable or answerable for one’s conduct.
• Safety Awareness - Ability to identify and correct conditions that affect employee safety.
• Working Under Pressure - Ability to complete assigned tasks under stressful situations.

SKILLS & ABILITIES

Education : High School Graduate or General Education Degree (GED)

Experience : Welding experience of some type or has been trained on specific welding processes

Computer Skills : Ability to be trained to learn basic computer skills, as well as to become proficient in company specific software.

Certificates & Licenses : Welding certifications are recommended.

Other Requirements : Proficient in English.

Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law.

We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class.

If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to , and please be sure to include the title and the location of the position for which you are applying.

Title : Welder

Location :

Dallas, TX, US, 75212

• job-location.job-location-inline display : inline; Division : Maintenance Job ID : 10458 .buttontexte2d2d6ef36473edf a border : 1px solid transparent;
• buttontexte2d2d6ef36473edf a : focus border : 1px dashed #f58021 !important; outline : none !important;

its whats inside that counts

Theres more to CMC than our steel products and the buildings, structures, and roads they go into. At CMC, its the people inside our recycling centers, fabrication plants, steel mills and offices that make us who we are as a company.

Our success comes from finding, retaining, and supporting the highest quality talent by offering :

• Day 1 benefits coverage with low cost medical, vision, dental
• Paid-time off and vacation starting Day 1
• Competitive compensation and bonuses
• Company-paid Lifestyle fund, life and disability insurance
• Company matching 401(k) plan
• Employee stock purchase plan
• Training and advancement opportunities

Why This Job

CMC provides an excellent opportunity to learn the steel industry and grow in your career. Whether you will spend your day in an office cubicle, operating a crane or running the melt shop at one of our mills, at CMC, youll get the training and support from your team that you need to excel in your role and reach your full potential.

What You'll Do

• Any other tasks as assigned by supervisor
• Demonstrates dependability in attendance, work completions, and flexibility to meet business needs
• Effectively communicates with co-workers and customers in a positive manner
• Keeps equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance;

calling for repairs when needed

• Maintains work area and equipment in a clean orderly condition and follows safety regulations
• Prepares and maintains accurate records of services and repairs

What You'll Need

• Ability to lift up to 50 lbs
• Must be able to stand for significant lengths of time in an industrial environment with exposure to all elements of weather
• Ability to work as a team player in a fast-paced environment, with a strong work ethic and attention to detail to find root cause for equipment failures
• Ability to work overtime as necessary outside of normally scheduled shift with little or no advance notification
• Capable of performing a wide range of physical activities which include pulling, reaching, bending, climbing and kneeling
• Experience with hydraulics / pneumatics, wiring, and working on heavy equipment
• Proficient in reading and understand technical documents, diagrams, and service manuals
• Valid drivers license
• Welding, cutting, and fabrication skills

Your Education

High School Diploma, GED, or equivalent experience is required

We are Commercial Metals Company, a Fortune 500 company with a family feel thats already part of your life. Our steel products have been supporting structures in more than 20 countries for over 100 years.

And the secret to our success? Weve built our legacy by assembling a team of innovators and doers to tackle some of the most challenging problems facing our world over the last 100 years but were just getting started.

If youre ready to reimagine ways to make the steel industry more sustainable, reinforce the bridges and roadways connecting our communities, and do meaningful work, youre ready to join CMC.

Apply today and start moving your career and our world forward.

Welder#N / A

TEAM provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Quality Ironworks has an immediate opening for Mig Welders at our headquarters in Dallas, TX.

Duties and Responsibilities include, but are not limited to :

• Manufacture and fabricate finished metal products-MIG Welding
• Follow blueprints to meet product specifications
• Calculate material measurements to verify specifications
• Conduct tests to evaluate weld quality and tolerance
• Material Handling

Qualifications :

• Previous experience in welding, manufacturing, or other related fields
• Familiarity with miller welding tools and procedures using the .035 MIG process.
• Familiarity with engineering blueprints and schematics (sometimes it'll be a shop drawing.)
• MUST be able to read WELDING BLUE PRINTS. Test will be given.
• Must be able to read TAPE MEASURE to 1 / 32?
• Ability to handle physical workload and lift 25-75lbs regularly.
• Fitter Welder a Plus

As a member of the team, you can expect :

• Complete benefits package Including health, dental and vision insurance
• 9 paid holidays
• Paid Vacation after 1 year of employment
• Opportunity for Advancement many of our managers were promoted from within!
• Team environment Enjoy working with a supportive group of employees that look out for one another.
• Job stability You can feel secure in your job because of the company’s agenda of predetermined projects.

WELDER - SANITATION

BRIEF DESCRIPTION :

The purpose of this position is to provide assembly and repair for metal structures, such as dumpsters, hydraulic systems and sanitation trucks, used in the collection and disposal of waste.

This is accomplished by the use of welding equipment for cutting, joining and brazing of a variety of metals and metal parts in repair, maintenance or fabrication tasks and minor automotive mechanical repairs.

Assignments are received in oral or written form and are occasionally accompanied by blueprints, drawings or specifications.

Work is performed with considerable independence and under general supervision. Work is reviewed for timely completion of work assignments and quality of work.

Performs related work as required.

LICENSING REQUIREMENTS :

Driver’s License Required YType - BEndorsements N - Tanker

Individuals who do not currently have a Class B N license will be enrolled in the ELDT program. They will have 30 days from the start of the online class to complete the Commercial Learner's Permit (CLP) and 60 days to complete the Behind the Wheel training.

The Commercial Driver's License must be provided to the City. No individual will be given more than 1 business day prior to the end of their probation to meet this requirement as a condition of employment.

and this provision will only be implemented for reasons out of the control of the individual as determined by the department.

ESSENTIAL FUNCTIONS :

Note : This information is intended to be descriptive of the key responsibilities of the position. The list of essential functions below does not identify all duties performed by any single incumbent in this position.

Additionally, please be aware of the legend below when referring to the physical demands of each essential function.

S)Sedentary(L)Light(M)Medium (H)Heavy X(V)Very Heavy

Exerting up to 10 lbs. occasionally or negligible weights frequently; sitting most of the time.Exerting up to 20 lbs. occasionally;

10 lbs. frequently; or negligible amounts constantly; OR requires walking or standing to a significant degree.Exerting 20-50 lbs.

occasionally; 10-25 lbs. frequently; or up to 10 lbs. constantly.Exerting 50-100 lbs. occasionally; 10-25 lbs. frequently;

or up to 10-20 lbs. constantly.Exerting over 100 lbs. occasionally; 50-100 lbs. frequently; or up to 20-50 lbs. constantly.

Code Essential Functions

1LRegular and reliable attendance in compliance with given schedules is a mandatory requirement of this position. Schedules may be subject to change with or without advance notice

2HRepairs trucks and equipment and completes special projects by laying out designs, fabricating parts, and welding to trucks and equipment.

3HRepairs containers by fitting and welding to repair, installing new doors and lids, installing hinges, modifying doors and lids for installations, loading and unloading vendor materials, and completing repairs.

4HCompletes field repairs in alleys and on customer locations by repairing doors, hinges, gates and lift pins.

5HFitting and joining, fabricating, and repairing metal and other welding material by applying appropriate welding techniques in accordance with product specifications and production schedules.

JOB REQUIREMENTS :

Description of Minimum Job Requirements-

Formal EducationWork requires knowledge necessary to understand basic operational, technical, or office processes. Level of knowledge equivalent to four years of high school or equivalency.

ExperienceOver one year up to and including two years.

PRIMARY WORK LOCATION - Shop and Outdoors