The Experienced Welder will be responsible for production welding, service & repair welding, prototype building and fitter welding in a high paced production environment.

This role will work with supervisors to ensure continuous improvements in work cells, hitting quotas, welding according to pre-set parameters using MIG, ARC and TIG welding processes.

Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers.

Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry.

Grow with us as we continue to expand our network of locations and services.

Responsibilities

• Conduct repairs, modifications and retrofits
• Conduct technical inspections
• Fabrication of custom prototypes from supplied drawings, fabrication of custom jigs and fixtures
• Perform maintenance on returned products to be refurbished or re-worked to customer specifications
• Keep detailed and accurate reports and documentation
• Operate manual or semi automatic flame cutting equipment
• Operate brazing and soldering equipment
• Operate angle grinders to prepare the parts that must be welded
• Repair machinery and other components
• Test and inspect welded surfaces and structure to discover flaws
• Maintain equipment in a condition that does not compromise safety
• Conduct project review and planning
• Fuel tank and card lock repairs

Education & Experience

• High School Diploma or equivalent required
• College or post secondary education is preferred
• AWS D1.1 SMAW Certification required
• Previous experience in Heavy Truck, Automotive or related industry experience preferred

Other Skills and Abilities Required

• Ensure compliance of all OHSA regulations, as well as Rush's Heath and Safety
• Assist in development or repair estimates
• Maintain a working knowledge of changes in technology, compliance and repair techniques
• Strong interpersonal skills and customer focused
• Excellent written and verbal communication skills
• Ability to work independently in a busy environment
• Experience with routine maintenance operations
• Able to effectively communicate both verbally and in writing
• Strong attention to detail

Benefits :

We offer exceptional compensation and benefits, 401K and stock purchase, incentives for performance, training, and opportunity for advancement - all in a culture that appreciates and rewards excellence, a positive attitude and integrity.

Fabricate and assemble metal structures and equipment through the use of welders, cutters, shapers and measuring tools

Essential Functions and Responsibilities include the following :

• Carryout production, inspection, and welding operation duties
• Operate basic shop equipment (band saw, grinders, etc.)
• Use various measuring tools (calipers, micrometers, height gage)
• Builds fixtures for work holding as required
• Perform TIG, MIG, and other types of welding based on project needs
• Set up welding machines in accordance with job to be performed
• Read blueprints and technical data to plan layout and procedures
• Work with designers and engineers to resolve print / part issues and exchange technical information
• Deburr and clean parts as required
• Other Duties as assigned.

Additional Job Requirements

• Maintain a safe and clean work space
• Follow established safety rules and regulations
• Regular scheduled attendance
• Indicate the percentage of time spent traveling

Subject to applicable laws and Air Method’s policies, regular attendance is an essential function of the position. All employees must follow Air Methods’ employment practices and policies.

Supervisory Responsibilities

This position has no supervisory responsibilities.

Qualifications

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and / or ability required.

In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.

Education & Experience

High school diploma or general education degree (GED); and two or more years’ related welding experience and / or training;

or equivalent combination of education and experience.

Previous experience reading blue prints and job traveler specifications to determine the proper tooling required to set up each job.

Knowledge of welding the following materials; Aluminum, Mild Steel, and Stainless Steel.

Skills

General math skills

Knowledge of machines in a manufacturing environment

Basic familiarity with the use of hand tools.

Ability to read and interpret blue prints.

Ability to read a Jaeger No. 2 Eye Chart at 16in. corrected or un corrected.

Ability to pass an AWS D17.1 Class A weld certification test using GTAW welding process

Computer Skills

None

Certificates, Licenses, Registrations

None

Salary

• Hiring Salary Range : $22.62 - $27.69 / hour
• Bonus / Commission Eligible : No
• Benefits : Air Methods provides a comprehensive benefits package. We believe our benefits should be as diverse as our teammates.

We offer competitive medical, dental and vision coverage along with voluntary accident, hospitalization, and critical illness coverage, short- and long-term disability, life and AD&D, time off programs, pretax and Roth (k) with a generous company match, tuition reimbursement, profession training and certifications, dependent care support, EAP and concierge services to name just some of what we have to offer.

Final compensation for the role will depend on several factors, including a candidate's qualifications, skills, certifications, and relevant work experience and may fall outside of the range shown.

Southland Holdings is currently accepting resumes for Certified Welders to join our team in Denver, CO to join our project at the Denver International airport.

Responsibilities :

• Welding pipe, templates, trench boxes, steel piles, welding related equipment repairs Welds and assembles metal components to effect repairs to dump trucks, trailers, and other equipment.
• Attend work on the schedule established by the employer and without excessive absenteeism.
• When not welding, must be willing to work with the crews as directed
• Follow all safe work practices.
• Obtain parts and materials.
• Access area to be welded by climbing ladder if needed.
• Use disc grinder to smooth out, weld, or grind parts prior to welding.
• Operate manual and automated welding units and equipment by depositing metal from electrode to work piece and joins edges of work piece.
• Maintain length of arc and speed of movement to form specified depth of fusion and bead.
• Weld in flat and vertical planes (all position welding).
• Examine weld for bead size and other specifications.
• Grind or clean weld joint of work piece.
• Repair improperly welded pieces and fill holes.
• Position and clamp work pieces together or assemble them in a jig fixture.
• Fabricate new or replacement parts for dump trucks, trailers, and wheel wash unit.
• Assemble component parts using hand and small power tools.
• May change hoses, fittings, air valves, suspension parts, etc. and cleanup work area daily.

Requirements :

• 5 Years welding experience, stick and wire "flux core", pipe and beam fitting, ability to pass pre-employment Weld Test Understand and follow basic welding Safety procedures
• Must be physically capable of navigating rugged terrain for purpose of performing duties outlined above.
• Must work in all weather conditions and be prepared for both extreme heat and cold
• Must be able to work independently and maintain a schedule of work.
• Must be available to work Over Time
• Ability to stand, squat, stoop, bend, lift for extended periods of time
• Must pass post offer drug screen-Ability to lift and carry, on a frequent basis, at least 50-90 pounds personally, and up to 150 pounds with assistance.

Desired qualifications :

• Certified welding certificates
• 7+ yrs related experience - OSHA safety training and a current First.
• 7+ yrs Aid and CPR certificate

Job Type : Full-time

Salary : $28.00 - $35.00 per hour

GPT is the world’s leading manufacturer of critical pipeline sealing and electrical isolation products. With a focus on safety, performance and reliability, we employ advanced engineering and manufacturing processes to meet the challenging demands of the oil and gas, water / wastewater, and construction and infrastructure industries.

JOB SUMMARY :

The Welder is responsible for prepping, assembling, repairing, and kitting our MIJ product line.

Salary : $22.00 - $24.00 per hour (Base Salary to be determined by the applicant's education, experience, knowledge, sills, and abilities, as well as internal equity and alignment with market data.)

Benefits :

401(k), 401(k) matching, Medical, Dental, Vision, Health Savings Account, Life and AD&D, Employee assistance program, PTO, Tuition Reimbursement, Employee Discounts

ESSENTIAL FUNCTIONS :

• Basic TIG, Sub Arc, or GMAW welding of carbon steel products
• Reads and interprets drawings (including weld symbols) and specifications for each job
• Familiar with GTAW, SMAW, GMAW, SAW, FCAW welding processes, as well as semi-automated weld experience
• Adjust welding machines to achieve desired results within parameters of established welding procedures
• Execution of work based on work orders and routers
• Transacting products to next stage in production utilizing ERP system
• Crating and kitting finished product for shipment
• Maintaining a safe, clean, and hazard free work area
• Comply with all OSHA and company safety practices and regulations

CORE COMPETENCIES :

• Collaborates - Building partnerships and working collaboratively with others to meet shared objectives.
• Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
• Demonstrates self-awareness - Using a combination of feedback and reflection to gain productive insight into personal strengths and weaknesses.
• Situational adaptability Adapting approach and demeanor in real time to match the shifting demands of different situations.
• Drives results Consistently achieving results, even under tough circumstances.
• Decision quality Making good and timely decisions that keep the organization moving forward

JOB QUALIFICATIONS :

• High School Diploma or Equivalent
• 1+ years’ of TIG, Sub Arc, and / or GMAW welding experience
• Ability to read and interpret drawings and work orders preferred
• API / ASME Certified preferred
• Ability to work independently and with minimal direction or supervision
• Commitment to work safely in all aspects of the position

PHYSICAL REQUIREMENTS :

Hard to Very Hard Work : Spending time in excess of 8 hours in a stationary position, generally standing. Physical demands may include stooping, kneeling, touching, feeling, reaching, standing, walking, pushing, pulling, lifting, grasping, talking, hearing, repetitive motions, positioning self to utilize equipment properly, and lifting and / or transporting items up to 35 pounds.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

GPT is the world’s leading manufacturer of critical pipeline sealing and electrical isolation products. With a focus on safety, performance and reliability, we employ advanced engineering and manufacturing processes to meet the challenging demands of the oil and gas, water / wastewater, and construction and infrastructure industries.

JOB SUMMARY :

The Welder is responsible for prepping, assembling, repairing, and kitting our MIJ product line.

Salary : $22.00 - $24.00 per hour (Base Salary to be determined by the applicant's education, experience, knowledge, sills, and abilities, as well as internal equity and alignment with market data.)

Benefits :

401(k), 401(k) matching, Medical, Dental, Vision, Health Savings Account, Life and AD&D, Employee assistance program, PTO, Tuition Reimbursement, Employee Discounts

ESSENTIAL FUNCTIONS :

• Basic TIG, Sub Arc, or GMAW welding of carbon steel products
• Reads and interprets drawings (including weld symbols) and specifications for each job
• Familiar with GTAW, SMAW, GMAW, SAW, FCAW welding processes, as well as semi-automated weld experience
• Adjust welding machines to achieve desired results within parameters of established welding procedures
• Execution of work based on work orders and routers
• Transacting products to next stage in production utilizing ERP system
• Crating and kitting finished product for shipment
• Maintaining a safe, clean, and hazard free work area
• Comply with all OSHA and company safety practices and regulations

CORE COMPETENCIES :

• Collaborates - Building partnerships and working collaboratively with others to meet shared objectives.
• Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
• Demonstrates self-awareness - Using a combination of feedback and reflection to gain productive insight into personal strengths and weaknesses.
• Situational adaptability Adapting approach and demeanor in real time to match the shifting demands of different situations.
• Drives results Consistently achieving results, even under tough circumstances.
• Decision quality Making good and timely decisions that keep the organization moving forward

JOB QUALIFICATIONS :

• High School Diploma or Equivalent
• 1+ years’ of TIG, Sub Arc, and / or GMAW welding experience
• Ability to read and interpret drawings and work orders preferred
• API / ASME Certified preferred
• Ability to work independently and with minimal direction or supervision
• Commitment to work safely in all aspects of the position

PHYSICAL REQUIREMENTS :

Hard to Very Hard Work : Spending time in excess of 8 hours in a stationary position, generally standing. Physical demands may include stooping, kneeling, touching, feeling, reaching, standing, walking, pushing, pulling, lifting, grasping, talking, hearing, repetitive motions, positioning self to utilize equipment properly, and lifting and / or transporting items up to 35 pounds.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.