Wastequip has an immediate opportunity for a Welder to support our ConFab Brand in our Galt, CA manufacturing location. This is a full-time position with great benefits including but not limited to Health Insurance, 401K Plan, Paid Vacation / Sick time, and so much more.

The ideal candidate will be a MIG Welder with prior experience in a manufacturing environment.

Starting Pay $22.82 / HR

Responsibilities

• Positions parts in jigs or fixtures on bench or floor, or clamps parts together along layout marks
• Lays out, positions, and tack welds work pieces
• Welds along vertical, horizontal, and overhead weld lines
• Connects regulator valves to oxygen and fuel gas cylinders for cutting torch. Turns regulator valves to activate flow of gases, lights torch, and adjusts gas mixture and pressure to obtain desired flame.

Holds & guides torch at proper angle to cut metal

• Examines weld for bead size and other specifications
• Scarfs or grooves welds and parts
• Chips or grinds off excess weld, slag, or splatter
• Other duties as assigned
• Employee must regularly stand, walk, reach, stoop, lift, climb or balance, kneel, crouch, or crawl

Employee must regularly lift and / or move up to 25 lbs., frequently lift and / or move up to 50 lbs., and occasionally lift and / or move 90 lbs.

Specific vision abilities required include distance vision, close vision, peripheral vision, & depth perception

Qualifications

• High school diploma or GED
• Six months of related MIG Welding experience and / or training preferred
• Able to MIG weld in a fast paced environment
• Ability to read and comprehend simple instructions, short correspondence, and memos
• Knowledge of basic math, tape measure reading, fractions & decimals
• Ability to understand and carry out detailed but uninvolved written or oral instructions
• Ability to read blue prints and measuring tape
• Experienced in a fast paced production environment preferred
• Able to pass all EHS required tests and clearances

About Wastequip

Headquartered in Charlotte, N.C. with manufacturing and service facilities throughout North America, Wastequip is the leading North American manufacturer of waste handling equipment.

Wastequip is the only manufacturer to offer a full line of steel and plastic products to collect, handle and transport just about any type of waste and recyclables.

Skills

We are offering a $10,000 Sign On Bonus for this position.. Terms and Conditions apply. The company reserves the right to modify or discontinue the program at any time.

As a valued member of our team, the welder will primarily weld and assemble metal components to effect repairs to dump trucks, trailers, and other similar equipment.

EXPERIENCE WITH WELDING ALUMINUM IS A PREFERRED! Our family-owned company offers highly competitive medical, dental and vision benefits, as well as a 401k plan, flexible spending account program, paid time off and holiday pay.

Pay : $24-$35 per hour based on experience.

Essential Duties and Responsibilities (including the following; other duties may be assigned)

• Attend work without excessive absenteeism
• Follow all safe work practices
• Obtain parts and access area to be welded by climbing ladder if necessary
• Use disc grinder to smooth out, weld, or grind parts
• Operate manual and automated welding units and equipment by depositing metal from electrode to work piece and joins edges of work
• Maintain length of arc and speed of movement to form specified depth of fusion and bead
• Weld in flat and vertical planes (all position welding)
• Examine weld for bead size and other
• Grind or clean weld joint of work piece
• Repair improperly welded pieces and fill
• Position and clamp work pieces together or assemble them in a jig
• Tack assemblies
• Fabricate new or replacement parts for dump trucks, trailers, and wheel wash unit
• Assemble component parts using hand and small power
• May change hoses, fittings, air valves and / or suspension parts
• Clean up work area

Qualifications

We are looking for a candidate who understands and can apply welding techniques, can accept responsibility for the work performed;

visualize what the finished product should look like and operate welding equipment with skill.

Education / Experience

• Experience working with steel & aluminum
• Wire-feed welding
• Mechanical with hydraulics
• Wrenching experience
• Fabrications with welding and layout

Language Skills

Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.

Must be able to read, write and speak English.

Reasoning Ability

Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

Certificates / Licenses / Registrations

Welding certification is not required but is preferred.

Physical Demands

We are looking for a candidate who can work quickly and skillfully with the hands. While performing the duties of this job, the employee is regularly required to stand.

The employee frequently is required to use hands to finger, handle or feel and reach with hands and arms. The employee is frequently required to sit, walk, balance, stoop, kneel, crouch, crawl, talk or hear.

The employee must occasionally life and / or move up to 50 pounds. Individual must be able to pass a pre-employment physical and drug screen.

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, hazardous chemicals and outside weather conditions.

The employee is occasionally exposed to wet and / or humid conditions, high, precarious places, fumes or airborne particles, extreme heat and risk of electrical shock.

The noise level in the work environment is usually moderate to loud. The employee is regularly exposed to wet or slippery ground conditions.

Employee must wear required personal protective equipment; up to and including safety vest, hard hat, ear protection, gloves and safety glasses.

A&A Concrete Supply is an EEO / AA (equal opportunity / affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates.

A&A Concrete Supply es una compañía EEO / AA (igualdad de oportunidades / acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera.

Title-

Welder Trainee

Job location-

Sacramento

95828

Duration- 12 months

JOB DESCRIPTION

SUMMARY (WELDER TRAINEE)Train in the fundamentals of welding and begin learning the critical skills you ll need for a welding career.

Support activities in the shop by processing and recycling weld test coupons as directed by weld educator.

ESSENTIAL DUTIES AND RESPONSIBILITIES

In this course, students will learn :

• Welding and Shop Safety
• The basic layout of construction drawings (blueprints)
• How to correctly read and interpret welding symbols.
• How to set up and operate GMAW welding equipment
• To weld GMAW process positions 1F-4F and 1G-4G. (GMAW, or MIG, uses a torch designed to provide a shielding gas for the weld and an automatic wire feed system that provides a constant feed of the filler metal.)
• Overhead crane operation pneumatic hand tools such as 4 grinders, straight and 90* die grinders, and air chisels
• Meet training schedule (12 weeks maximum)
• Meet internal and AWS quality expectations
• Further on the job training will be required post course completion.
• Other duties may be assigned.

QUALIFICATIONS

• To perform this job successfully, an individual must be able to perform all essential duties satisfactorily.
• The requirements listed below are representative of the knowledge, skill, and / or ability required.
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

E DUCATION and / or EXPERIENCE

• High school education, GED (required)
• Exposure to high school weld program, community college weld program, technical weld school, or equivalent. (preferred)
• General mechanical / manufacturing background.
• General laborer background

OTHER QUALIFICATIONS

• Strong verbal communication skills
• Strong spatial acuity
• Ability to use hand tools and welding tools safely.
• Able to work with minimum supervision and follow instructions.
• Able to work as a team member in group situations.
• Able to verify dimensions. Must understand tolerances. Basic understanding of SI measurements (metric system)
• Complete shop order documentation and time sheets.

PHYSICAL DEMANDS :

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the employee is regularly required to stand.
• The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl.
• The employee is occasionally required to sit; use hands to finger, handle, or feel objects, tools, or controls; climb or balance; and talk or hear.
• The employee must occasionally lift and / or move no more than 40pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.WORK ENVIRONMENT :
• The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles and toxic or caustic chemicals.
• The employee frequently works near moving mechanical parts and in outside weather conditions.
• The employee occasionally works in high, precarious places and is occasionally exposed to risk of electrical shock and vibration.
• The noise level in the work environment is usually moderate.

Acara Solutions is looking for a Fitter / Welder for our client located in Sacramento, CA : You can APPLY IMMEDIATELY if you have a solid 6 months of Welding experience.

Location : Sacramento, CA Position : WELDEREmployment Type : Direct Company Hire Pay : $21.00 to $22.00Shift 1 : Mon. to Fri.

5 : 00am to 1 : 30pm Shift 2 : Mon. to Fri. 3 : 00pm to 11 : 30pm +10% Shift Differential Key Benefits : -1 paid holiday, 18 days PTO-401K - 6% company match-Medical, dental, vision, and life insurance-Tuition reimbursementJob Description : -Work detail drawings fit-up piece parts in fixturing fit, tack and weld piece parts according to detail drawings with components consisting of steel channels, brackets, angles, sheathing, assemblies, and subassemblies.

• Tack welds all parts together in equipment, ensuring all dimensions are correct to specified drawings.-Weld complete assembly according to specified welding standards.
• Correct fabrication mistakes.-Incorporate approved design changes where necessary.-Fabricate shop fixtures as needed by assembly personnel per engineering sketch.
• Meet production schedule, quality, and planned labor hours with limited supervision.-Utilization of hand and power shop tools.
• Understand and apply, minimally these forms of welding, carbon steel, stainless steel, low alloy.-General mechanical background.
• Ability to use hand tools and welding tools safely.-Able to work with limited supervision and follow instructions.-Able to work as a team member in group situations.
• Fully understand manufacturing drawings, able to verify dimensions.-Understand tolerance systems.-Complete shop order documentation and time sheets.
• Meet internal Company standards for quality and workmanship-Expected to contribute and maintain conditions that will ensure a healthy and safe working environment.
• Requested or needed to work overtime, weekends, and different shifts as business needs dictate.-Works on assignments that are routine in nature.
• Normally receives basic instructions on routine tasks and detailed instructions on new assignments.-Follows standard practices and procedures where answers can be readily obtained.
• General day to day direction from Group Leads.-Direction from immediate supervisor and others in the group when necessary.
• Reasonable accommodations made to enable individuals with disabilities to perform the essential functionsRequired Skills / Qualifications : -High school diploma or GED-Minimum of 1 years' experience in Mechanical assemblyPreferred Skills / Qualifications : -To perform this job successfully, an individual able to perform all essential duties satisfactorily.
• Ability to apply workmanship standards and understand and carry out instructions furnished in written, oral or diagram form.
• Able to perform basic tasks independently, limited supervision and in a group setting-AWS certification (American Welding Society) for welding of carbon steel using GMAW process position 3G, Vertical up and 4F overhead-Working knowledge of torch and plasma equipment.
• Working knowledge of GTAW Welding Additional Information : -Upon offer of employment, the individual will be subject to a background check and a drug screen-While performing the duties of this job, the employee is regularly needed to stand.
• The employee frequently is needed to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl.-The employee is occasionally needed to sit;

use hands to finger, handle, or feel objects, tools, or controls; climb, crawl in tight spaces or balance; and talk or hear.

• The employee occasionally lift or move no more than 40 pounds.-Specific vision abilities needed by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Able to wear a Powered Air Purifying Respirator (PAPR), and any other needed personal protective equipment.Aleron companies (Acara Solutions, Aleron Shared Resources, Broadleaf Results, Lume Strategies, TalentRise, Viaduct, and Aleron's strategic partner, SDI) are Equal Employment Opportunity and Affirmative Action Employers.

All qualified applicants will receive consideration for employment without regard to race, color, religion, gender identity, sexual orientation, national origin, genetic information, sex, age, disability, veteran status, or any other legally protected basis.

The Aleron companies welcome and encourage applications from diverse candidates, including people with disabilities. Accommodations are available upon request for applicants taking part in all aspects of the selection process.

Applicants for this position must be legally authorized to work in the United States. This position does not meet the employment requirements for individuals with F-1 OPT STEM work authorization status.

Rolling Stock Welder

As a Fitter / Welder, you will support a broad range of activities in a dynamic, high energy production environment in the fabrication of carbon steel and stainless-steel car bodies for the best rail vehicles in the world.

What we are offering

Full time position

Starting pay - $. / hr. (plus shift premium % for 2nd shift, % for 3rd shift)

paid holidays, days PTO

K 6% company match

Medical, dental, vision, and life insurance

Tuition reimbursement

• Weld carbon steel or stainless-steel assemblies for car bodies or bogies.
• Fit, tack, and weld component parts into subassemblies and integrated final car bodies and bogies according to detail drawings with the aid of jigs and fixtures and state-of-the-art welding equipment.
• Weld assemblies according to specified welding standards.
• Ensure all dimensions comply with drawing specifications and tolerances.
• Repair fabrication errors according to defined repair procedures.
• Safely use hand, power, and welding tools.
• Complete work order documentation, quality documents, and accurately clock labor hours.
• Meet company standards for quality and workmanship
• Meet production schedule, quality requirements, and budgeted labor hours with limited supervision.
• High school education or GED
• 2 years MIG welding experience or completion of accredited weld education program
• General mechanical background.
• Basic English skills ability to read and understand written instructions and effectively communicate verbally.

We would be impressed if you have

• AWS certification for welding carbon steel using GMAW 3G vertical up and 4F overhead
• Working knowledge of GTAW welding

Additional Information

• Upon offer of employment, candidates will be subject to a background check and drug screen, as well as Pulmonary Function Test and Respirator Fit Test.
• The physical demands described here are representative of those necessary to successfully perform the essential job duties : Frequently walk, reach with hands and arms, stoop, kneel, crouch, or crawl.
• Occasionally required to sit; use hands to finger, handle, or feel objects, tools or controls; climb, crawl in tight spaces or balance;

talk and hear.Lift and move no more than pounds.Specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to focus.

• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
• Welders are required to wear a Powered Air Purifying Respirator (PAPR), and other required protective equipment.

We stay at the forefront of the rail industry . We continuously improve, learning directly from those who are doing the work.

We are optimistic about change and the possibilities it brings : We welcome programmatic improvements and strategy shifts which will result in positive results for the world.

We value our people, and we support their growth and development : Our people are at the center of our work, and we support their development by finding their level of potential development through problem-solving and in collaboration with peers.

We mean what we say, and we commit to our promises : We follow through on our commitments with honesty and integrity

We do more with less : We are a lean organization serving customers who are serving communities of people .

We are principles-based, not rules-based : We make decisions based on what we believe is best for our people and the communities we serve as opposed to adhering to a prescriptive set of immovable practices.

We value diversity and strive to be inclusive in our work, both for our customer and our team members : We believe in the importance of investing in employees in alignment with our values and honoring every individual story and unique path.

LI CAS

Equal Employment Opportunity Statement

Siemens is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

EEO is the Law

Applicants and employees are protected under Federal law from discrimination. To learn more, .

Pay Transparency Non-Discrimination Provision

Siemens follows Executive Order , including the Pay Transparency Nondiscrimination Provision. To learn more, .

California Privacy Notice

California residents have the right to receive additional notices about their personal information. To learn more, click .