Fabricator / Welders with 3-5 years experience preferred. Job site is in Marana. Must have reliable transportation. Will be working in two different locations in Marana.

• Knowlege in MIG and / or TIG welding
• Ability to accurately read and interpret shop drawings, architectural plans, weld symbols, and structural drawings
• Practical experience with equipment and plan layout, assembly, cutting, and welding, and knowledge of geometry, physical properties of metal machining, weld shrinkage, and welding techniques
• Practical knowledge and use of common shop equipment and tools
• Fabricate assemblies from provided information and materials
• Dependable and possesses good time management skills
• Maintain a clean and orderly work area

Day Shift M-F. Overtime on Saturdays.

We are looking for a skilled Welder, who can weld metals and solder, build metal gates with steel, and also has experience with building fences.

Your job is important as it provides the foundation for strong infrastructure.

Are you someone with 2+ years of experience in welding? Are you looking for a job that provides future growth opportunities and comp based on your experience and hard work?

Salary : Hourly $16-$19 / hour. Starting pay may be on the higher end based on experience.

Your Responsibilities :

• Reading blueprints and drawings and taking or reading measurements to plan layout and procedures.
• Determine the appropriate welding equipment or method based on requirements.
• Operate angle grinders to prepare the parts that must be welded.
• Align components using calipers, rulers, etc., and clamp pieces.
• Building fences, solder and weld metal pieces, and pipes as metals.
• Test and inspect welded surfaces and structures to discover flaws.
• Maintain equipment in a condition that does not compromise safety.

What you will bring along :

• 2+ years of proven experience as a welder.
• Experience using a variety of welding equipment and procedures.
• Experience in using electrical or manual tools (saws, squares, calipers, etc.)
• Ability to read and interpret technical documents and drawings
• Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves, etc.)
• Deftness and attention to detail.
• Professional Certification (e.g. an AWS welding certificate) will be a plus.

Job Type : Full-time

Waahe Capital

From asset acquisition to design and redevelopment, construction to property management - we do it all, for the sake of ensuring our communities experience a value-filled, eco-friendly, modern setting to craft their best lives in.

We can offer you growth, great benefits, and a creative work environment. Your efforts will not go unnoticed, as we promote from within the company.

Your ideas will always be welcomed.

Equinox Apartments is an equal opportunity employer, and we’re proud to support and celebrate diversity in the workplace.

We are committed to equal consideration for all qualified applicants.

Equinox Apartments is a drug-free workplace.

Fabricator / Welders with 3-5 years experience preferred. Job site is in Marana. Must have reliable transportation. Will be working in two different locations in Marana.

• Knowlege in MIG and / or TIG welding
• Ability to accurately read and interpret shop drawings, architectural plans, weld symbols, and structural drawings
• Practical experience with equipment and plan layout, assembly, cutting, and welding, and knowledge of geometry, physical properties of metal machining, weld shrinkage, and welding techniques
• Practical knowledge and use of common shop equipment and tools
• Fabricate assemblies from provided information and materials
• Dependable and possesses good time management skills
• Maintain a clean and orderly work area

Day Shift M-F. Overtime on Saturdays.

Career Opportunity

POSITION : Preventative Maintenance Technician

DEPARTMENT : Maintenance

LOCATION : Prescott Valley, AZ

REPORTS TO : Facilities Manager

STTUS : Full-Time, Hourly

Pay Range : $20 - $25

MI Windows and Doors is looking for hardworking, dependable people to join our maintenance family as a Welder Apprentice on First Shift.

First Shift works Monday - Friday with OT on Saturday available. If you take pride in what you do and have a desire to tackle new challenges, then we have an opportunity for you! We offer competitive wages and plant incentives.

Flexible Paid Time Off, 401(k), Tuition Reimbursement, Comprehensive Benefit Package including Company-Funded Health Savings Account & Eight Paid Holidays! Fast Tracked Interviews & Offers.

PRIMARY RESPONSIBILITIES :

MIG Welder with experience and proficiency for our Manufacturing plant in Prescott Valley, AZ.

• Fabrication skill set required.
• Basic mechanical & trouble shooting skills.
• Facility Maintenance

DUTIES AND RESPONSIBILITIES :

• Perform all work in a safe manner following all company safety policies and procedures
• Maintain, troubleshoot, perform preventative maintenance, and repair equipment in assigned area under the guidance of higher-level utility mechanics
• Maintain open and accurate communication with other maintenance employees as well as supervisor
• Complete all assigned work orders completely and accurately, documenting all prudent information describing the completion of the work order
• Complete Maintenance, Repair, and Operations documentation and Fiix entry as dictated by maintenance tasks, repairs, and preventative maintenance tasks
• Perform technical maintenance tasks under close supervision
• Provide all information necessary to maintain proper parts inventories
• Work with outside contractors to complete projects and improvements whenever possible
• Maintain all facility grounds and services

Requirements

QUALIFICATIONS, SKILLS AND ABILITIES :

• MIG WELDING and FABRICATION EXPERIENCE
• Technical or Trade school degree preferred, or a combination of a High School Diploma or G.E.D. plus 2 years of experience in a maintenance occupation in a manufacturing environment
• Basic understanding of industrial electricity
• Working knowledge of energy sources for each piece of utility equipment in assigned area (electric, hydraulic, and pneumatic, etc.

PLC experience a plus

• Ability to maintain plant utilities (lighting, water systems, drain systems, etc.)
• Ability to work independently when directed
• Basic understanding of schematics and blueprints
• Basic understanding of various diagnostic equipment including but not limited to ohms meters, voltage meters, etc. Basic knowledge and understanding of power equipment including cut-off saws, demo-saws, drills, etc.
• Thoroughly understand and follow all OSHA and company regulations as they relate to the maintenance field (Lock Out Tag Out, Personal Protective Equipment, etc.)
• Basic understanding of critical Maintenance, Repair, and Operations, and Proteus procedures and requirements
• Strong written and verbal communication skills
• Strong mathematical and analytical skills

MI Windows and Doors is an equal opportunity employer. MI Windows and Doors does not discriminate on the basis of religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information or any other applicable legally protected category.

Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse / dependents.

We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life.

Our medical plans include a Health Reimbursement Account (HRA) or Health Savings Account (HSA) option to help you save for health care costs.

Below is a list of benefits you will enjoy while working with our company.

• Medical plans with HRA or HSA options
• Prescription
• Dental
• Vision
• Company Paid Life Insurance
• Voluntary Life Insurance
• Supplemental Hospital Indemnity, Critical Illness, and Accident Insurances
• Company paid Short-Term Disability
• Company paid Long-Term Disability
• Paid time off (PTO), including Vacation, Personal, and 8 paid Holidays
• 401k retirement plan with company match
• Employee Assistance Program
• Teladoc
• Tuition Reimbursement
• Yearly Wellness Clinic

MITER Brands is an equal opportunity employer. MI Windows and Doors does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

An Entry Level Service Technician is responsible for providing service to our customers while maintaining exceptional customer service.

This can include : cleaning, maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning.

Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers.

Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry.

Grow with us as we continue to expand our network of locations and dealerships.

Responsibilities :

• Provide technical service to vehicles and equipment.
• Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures.
• Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed.
• Tag all warranty parts and returns to warranty clerk.
• Attend training classes and keep abreast of factory technical bulletins.
• Develop and maintain positive relationships with customers to increase overall customer satisfaction.

Benefits :

We offer exceptional compensation and benefits, 401K and stock purchase, incentives for performance, training, and opportunity for advancement - all in a culture that appreciates and rewards excellence, a positive attitude and integrity.

Basic Qualifications :

• High school diploma or general education degree (GED)
• 1 year fleet, dealership, and / or technical school experience