Puedes esperar mucho de una carrera en Worley . Juntos, nuestras casi 60,000 personas en 60 países ya han logrado muchas novedades en la industria.

Y hemos batido varios récords en el camino

Estamos entusiasmados con los desafíos que se avecinan a medida que la transición energética cobra ritmo. Si nos preguntas, nunca ha habido un momento más gratificante para trabajar en los sectores de mineria, energía, químicos y recursos.

Cualquiera sea tu ambición, hay un camino para ti aquí. Y no hay barreras para desarrollar tu potencial éxito profesion.

Propósito

Brindar liderazgo, soporte y hacer parte de la realización de diseños de ingeniería mecánica para Worley y sus clientes, de manera que dichos diseños cumplan con las especificaciones legales y reglamentarias aplicables, a tiempo y dentro del presupuesto establecidos.

Responsabilidades

• Levantamiento y recopilación de información en campo asociada con los proyectos a desarrollar, para soportar la elaboración de documentos de definición de alcance y de desarrollo de las diferentes etapas de ingeniería de cada proyecto a cargo.
• Soporte técnico a suministros de materiales durante la ejecución de la obra (revisión técnica de cotizaciones y ofertas de los procesos de compra en curso para verificación de cumplimiento de requerimientos técnicos).
• Liderar y asistir las diferentes actividades de diseño, apoyo técnico para compra y construcción (esta última si se requiere)
• Revisar y apoyar la realización de ingenierías conceptuales, básicas, de detalle y / o construcción.
• Revisar y apoyar la realización de documentos de suministro de equipos mecánicos como : memorias de cálculo, hojas de datos, especificaciones técnicas, planes de inspección y pruebas, requisiciones de materiales y planos.
• Brindar soporte técnico de ingeniería a solicitudes de cambio durante la construcción.
• Realizar replanteamiento y optimizaciones de ingeniería necesarios en la etapa constructiva.
• Actualización de Ingenierías de acuerdo con los hallazgos y levantamientos encontrados.
• Garantizar que el alcance del proyecto sea claro y que los cambios cumplan con los procesos de gestión de cambios del proyecto.
• Actuar como líder de ingeniería mecánica en proyectos específicos.
• Apoyar la realización de ofertas de proyectos con alcances técnicos para el desarrollo de ingenierías.

Experiencia técnica e industrial

• Experiencia mínima de 6 años en cargos similares.
• Conocimientos sólidos en diseño, montaje, construcción y puesta en marcha de sistemas y equipos mecánicos en los sectores de producción de petróleo y gas y refinación.
• Conocimiento y experiencia desarrollando ingenierías conceptuales, básicas y de detalle en Ingeniería mecánica, los cuales deben comprender procesos operativos de movimiento de hidrocarburos, dimensionamiento y selección de equipos estático, rotativo y contra incendio.
• Conocimiento de normas reglamentarias y de normas técnicas de diseño (ASME, API, NFPA, ISO, otras).
• Experiencia en elaboración de memorias de cálculo, hojas de datos, especificaciones técnicas, planes de inspección y pruebas, requisiciones de materiales y planos.
• Experiencia en lectura y revisión de PFDs, P&IDs, documentos de dimensionamiento de equipos por proceso.

Educación

Requerido :

• Profesional en Ingeniería Mecánica.
• Nivel de inglés B2 / C1.

Deseable :

• Especialización o Maestría en Ingeniería Mecánica, gerencia de proyectos o afín.
• Manejo de PVElite, Tank, HTRI, software de aire acondicionado, software de selección de equipos de bombeo y compresión.

Ubicación :

Colombia (Teletrabajo)

Lo que te ofrecemos

Brindar a nuestra gente una cultura ágil y oportunidades laborales desafiantes da como resultado un ambiente laboral positivo.

Nuestra gente disfruta de paquetes de compensación competitivos y un ambiente de trabajo divertido, personal, colaborativo y seguro.

Valoramos la igualdad de oportunidades de empleo y estamos comprometidos con promover la equidad , la igualdad y la diversidad

Si tienes la pasión y el talento para mantener altos tus niveles de energía, es hora de probar los límites de lo que puedes llegar a ser .

Encuentra tu futuro con Worley !

Please note : No agency representation or submissions will be recognized for this vacancy.

Description

Cyient is hiring for an experienced Mechanical Engineer, ideally with experience in Automated People Mover (ADM) train systems.

You will design systems and products related to the ADMs, create design packages and provide technical expertise to design and production teams.

You may also have experience with Metro, Rail, Rolling Stock, Locomotive, Mechanical, People Movers, Monorail, Interiors, Exteriors.

You are also experienced with Catia V5, 3D-COM, VPM, PDM, or Teamcenter.

This position is an onsite opportunity in the Pittsburgh, PA area. All candidates must be able to report to an office daily (relocation assistance available)

Responsibilities and Accountabilities

• Develop a complete technical Scope of Work for rolling stock based on technical and system requirements.
• Perform 3D models, Bill of Materials and 2D deliverables in compliance with APM Pittsburgh standards.
• APM undercar equipment installation process and constraints
• Expertise Alstom tools and processes
• Designing products taking into account project requirements, performances and manufacturability, integration of mechanical and electrical assemblies and understanding the vehicle interior / exteriors requirements and translate into concept.
• Identify and select appropriate materials and surface finish of Vehicle Interiors / exterior parts, primarily with APM 300R Interiors
• Through understating of stack-up / individual tolerances and its effect on the assemblies.
• Conduct engineering studies and prepare or lead the preparation of specifications for both internal and external presentation.

Educational Requirements

Bachelors or Masters in Mechanical Engineering / Production Engineering / Aeronautical Engineering / Automotive Engineering

Experience (Essential Functions)

• 10+ years of experience in Mechanical Design Engineering, Minimum four years in APM Projects.
• Knowledge of metallic materials (physical properties and design), industrial processes (welding, bending, machining). Must be familiar with welding codes (ex. AWS D1.x & D8.x).
• Required work experience in Catia v5 (at least 4+ years).
• Preferred work experience in PDM / PLM (Enovia-DMA, 3DCom)
• Preferred experience on overhaul projects and reverse engineering.

Working Conditions (Industrial / Environmental)

Skills & Experience

Catia, Communication, ENOVIA - V6, Étude de conception, Étude du matériel, Qualité de conception

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law.

We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

Job Description

Would you like to get away from your desk and get your hands on some hardware, working on cutting-edge technical work in a way that you can see directly impacting the mission in a laboratory / test environment If you want to use your Mechanical Engineering knowledge to solve real world, first-of-a-kind problems and see your ideas come to life with design and acquisition cycles being on the order of weeks to months.

Also, if you want to contribute to solving real problems that are affecting the Navy and developing new technologies that will advance the program's mission, then the Design Engineering Unit in the Bettis Test Programs Department is looking for you! Apply today!

The Design Engineering Unit supports the Control Drive Mechanism Test Facility, the Large Component Test Facility, and Pump and Component Quiet Test Loop, which perform high pressure / high temperature testing, mechanism testing, pump testing, steam testing and more.

The successful candidate would perform fluid-mechanical system and hardware design, ASME code calculations, piping flow and flexibility analyses, equipment selection and procurement, as well as oversee testing systems within the Laboratories.

The candidate would work with a diverse team of engineers, scientists, technicians, project managers, and vendors to deliver unique, one-off tests that support the Naval Reactors program.

Required Combination of Knowledge and Skill

• BS degree in engineering or Bachelor's degree in a science related field from an accredited college or university and a minimum of four years of relevant experience or;
• MS degree in engineering or Master's degree in a science related field from an accredited college or university and a minimum of two years of relevant experience or;

Currently or previously NPE qualified or CTE / ACRS and one year of EOOW in the Nuclear Operations Program or Watch Instructor and Refueling Facility Area Refueling Engineer and one year as SRE

Preferred Skills

Hardware design experience is preferred, but not required. Procedure writing experience is also preferred.

About Optimus Technologies Optimus Technologies is a clean energy technology company based in Pittsburgh, PA. Optimus manufactures the Vector System, an advanced fuel system technology that enables diesel engines to operate on 100% biodiesel.

The Vector System is designed for medium and heavy-duty fleet applications, where emissions reductions are challenging or impossible to achieve in a cost-effective manner through other means.

The Vector System integrates into existing operations to facilitate a seamless transition to low-carbon fuels. Optimus’ Vector System is in use with leading municipal and private fleets throughout the country, enabling them to achieve near-zero carbon emissions while reducing their fuel and fleet operating costs.

Find out more at optimustec.com , on Twitter , Facebook , and Instagram . Job Description Optimus seeks an organized, detail oriented Mechanical Engineer III based in Pittsburgh, PA.

This is a full time (40-50 hours per week) salaried position ($86,000 - $95,000) with benefits. This position is ideal for candidates with extensive experience in heavy automotive engineering, control systems, and regulatory compliance.

There is a travel requirement of approximately 10-20% of work time in order to gain an intimate understanding of the practical application and long-term operation of the Vector System.

The position requires significant collaboration with other electrical & mechanical engineering team members, as well as working closely with our field operations and production teams.

Optimus is proud to be an equal opportunity employer. People of color, LGBTQ+ people, people with disabilities, veterans and members of other historically disenfranchised groups are strongly encouraged to apply;

Responsibilities Design and development of a variety of Vector System components through system implementation, manufacturing, and production.

Utilize OEM & internally developed data to incorporate into component design Support installation and ongoing upgrades / troubleshooting by traveling to clients’ locations for physical implementation Coordinate and exchange technical information with peers and pertinent third-party vendors Use of critical thinking to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems Develop test and production plans for new products and components Provide guidance to the less experienced team members Keep track of all your time in a tracking application Identify system inefficiencies and create plans to correct them Create work instructions for assembly and quality testing Participate and lead design review meetings and conference calls with manufacturers, subcontractors, and vendors Complete all project and design documentation for inclusion in installation manuals and product materials Read, interpret, and utilize appropriate technical drawings, schematics, electrical diagrams, and manuals to complete component design Qualifications & Experience Bachelor’s degree in mechanical engineering from an accredited university 5+ years of electro-mechanical engineering experience;

experience in an automotive product design and manufacturing Experience with advanced systems controls and associated software Experience with industry standards and test plan creation based on good engineering judgment Knowledge of regulatory compliance is a plus Aptitude for mechanical and electrical systems Ability to comprehend detailed product schematics and documentation Experience with drafting technical documents (please provide samples upon request) Proficient computer skills, especially with AutoDesk, Solidworks, and the ability to learn additional software programs as necessary Demonstrated strong written and verbal communication skills with the ability and willingness to work with other team members to solve problems Proven ability to work independently and under pressure with little to no supervision when necessary Detail-oriented with good organizational skills in prioritizing, scheduling, and time management Other Job Requirements A passion for alternative energy solutions Must possess a commitment to life-long learning Exposure to outdoor, warehouse, and shop working conditions Ability to work around a variety of particulates, lubricants & chemicals Adaptive to everchanging workload, conditions, and environments Valid driver’s license with acceptable driving record Domestic travel, as required (up to 20%) Flexible hours of operation Powered by JazzHR

Seeking an organized, detail oriented Mechanical Engineering Associate based in Pittsburgh, PA. This is a full time (35-50 hours per week) salaried position with benefits.

There is a travel requirement of approximately 50% of work time in order to gain an intimate understanding of practical applications and long-term operations.

The position requires significant collaboration with other electrical & mechanical engineering team members, as well as working closely with our hands on technicians and third-party mechanics to support customer implementation.

We are proud to be an equal opportunity employer. People of color, LGBTQ+ people, people with disabilities, veterans and members of other historically disenfranchised groups are strongly encouraged to apply;

we also consider qualified applicants regardless of criminal histories. If you are unsure about being qualified for this position after reading the responsibilities and requirements, please apply anyway! We are most excited to work with individuals who learn quickly and have a passion for clean energy solutions.

Responsibilities : Design and development of a variety of components through system implementation, manufacturing, and production.

Utilize OEM & internally developed data to incorporate into component design. Support installation and ongoing upgrades / troubleshooting by traveling to clients’ locations for physical implementation.

Coordinate and exchange technical information with peers and pertinent third-party vendors. Use of critical thinking to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.

Read, interpret, and utilize appropriate technical drawings, schematics, electrical diagrams, and manuals to complete component design.

• Qualifications & Experience : Bachelor’s degree in mechanical engineering from an accredited university 1-3 years of mechanical engineering experience;
• experience in an industrial product design and manufacturing company a plus. Aptitude for mechanical and electrical systems preferred;

heavy-duty diesel engine knowledge a plus. Ability to comprehend detailed product schematics and documentation. Proficient computer skills, especially with AutoDesk, AutoCad, Solidworks, and Inventor, and the ability to learn additional software programs as necessary.

Demonstrated strong written and verbal communication skills with the ability and willingness to work with other team members to solve problems.

Proven ability to work independently and under pressure with little to no supervision when necessary. Detail-oriented with good organizational skills in prioritizing, scheduling, and time management.

Other Job Requirements : A passion for alternative energy solutions. Must possess a commitment to life-long learning. Exposure to outdoor, warehouse, and shop working conditions.

Ability to work around a variety of particulates, lubricants & chemicals Adaptive to everchanging workload, conditions, and environments.

Valid driver’s license with acceptable driving record Domestic travel, as required (up to 50%). Flexible hours of operation.