Job Summary

Performs preventive maintenance inspection (PMI), troubleshoots, repairs, and rebuilds major components on compactors and containers.

Ensures accurate diagnosis and effective repair and / or replacement of components.

II. Essential Duties and Responsibilities

To perform this job successfully, an individual must be able to perform the following tasks.

• Performs preventive maintenance inspections, diagnoses and repairs compactors, containers, and carts.
• Performs moderately complex welding processes such as arc welding, gas welding, aluminum welding, brazing, plastic welding, and soft soldering on a variety of materials.
• Completes required paperwork utilizing fleet maintenance software program associated with repairing compactors and containers, documenting parts usage, and accounting for repair times.
• Conducts safety checks on compactors and containers.
• Performs service calls for compactor repairs and emergency breakdowns.
• Performs related work such as flame cutting, bending, forming, beveling, notching of metal and plastic parts.
• Performs standard layouts and set-ups of dimensions and tolerances.
• Estimates time and material costs on repairs and requisitions new parts.
• Inspects the quality of outside / supplier repairs and or rebuilds.
• Performs layout operations, develops fixtures for one-of-a-kind units, and selects optimum welding process.
• Provides assistance, guidance and direction to lower level maintenance personnel.
• In the absence of supervision may provide container maintenance supervisory duties.
• Maintains a clean, safe work area in compliance with Corporate / OSHA Standards.
• Performs all work in accordance with established safety procedures

III. Supervisory Responsibilities

This job has no supervisory duties.

IV. Qualifications

The requirements listed below are representative of the qualifications necessary to perform the job.

A. Education and Experience

• Education : Not required
• Experience : 4 years of relevant work experience.

B. Certificates, Licenses, Registrations or Other Requirements

Valid drivers license.

C. Other Knowledge, Skills or Abilities Required

• Proficiency in welding techniques; knowledge of safety procedures and practices necessary while operating or repairing compactors, containers and carts;
• skill in operating tools equipment, parts and procedures utilized during the repair and servicing of compactors, containers and carts;
• skill in repair of special purpose equipment; ability to perform repairs on a variety of compactors, containers and carts;

and ability to utilize fleet maintenance software program may be required.

V. Work Environment

Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.

• Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc.) most of the work day;
• Required to exert physical effort in handling objects less than pounds occasionally;
• Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc.) rarely;
• Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements rarely;

Normal setting for this job is : repair / maintenance shop.

Note : The level of physical effort may vary from site to site and in some cases be greater or lesser than documented here.

Benefits

At Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability.

As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days.

Please note that benefits may vary by site.

Duties and Responsibilities

• Operator will be required to set-up, adjust machines, and equipment in order to produce an acceptable quality product.
• Will receive instructions, prints, and route sheets for the job. Will organize and plan operational duties for the shift he / she is assigned.
• Will be required to set-up, operate, program, and trouble shoot Robot Systems (material handling, drilling, and welding) of other robotics pieces of equipment in the welding process to achieve acceptable levels in productivity, and quality.
• Perform all required quality tests, certifications, and production checks as required by Quality Assurance or his / her supervisor.
• Operator will continually visually inspect product, record production as required, report / record scrap, and other various duties or rework as assigned.
• Operator will be required to make routine equipment adjustments to insure the process is efficient and welding to company standards at all times.
• Will be required to manually repair, or hand weld some products that are below standard, due to tolerance variables during the Robotic operations.
• Operator will need to know how to operate overhead crane, forklift, hand held grinder, and other department equipment.
• Must keep equipment and work area clean and orderly.
• Must be able to work as a team.

Skills and Experience

• Must be qualified and successfully held a Certified Welder’s job or its equivalent, either in position or be certified by a technical institute.
• Operator will be required to pass the AWS Certification Test per Company Welding Policy.
• Must be able to satisfactorily use calipers, gages, and other measuring devices.
• Will be required to perform SPC procedures and tests, then interpret findings in order to make appropriate changes in the process.
• Must be able to navigate the HMI (Human-Machine Interface)
• Highly motivated and willing to solve problems.

Job Summary

Use various welding processes to weld, repair, and / or join metal components holding shop standards. Produce a quality product in a timely manner that conforms to all written practices.

Job Responsibilities

• Responsible for welding metal components together to fabricate or repair products according to shop blueprints, SOE’s, OMS’s, to AWS specifications.
• Welding processes will include GMAW, TMAW, Arc Stud Welding, and Resistance Welding.
• Cuts metal using oxy-acetylene, plasma cutter, or grinding discs following shop blue prints.
• May be required to pass employer performance tests or standard tests to meet certification standards of AWS.
• May operate the following : Shear, Chop Saw, Crane, Die Grinder,Notcher, Drill Press, Grinder, Bandsaw, Forklift, and Iron Worker.
• Workin a safe and efficient manner.
• Utilization of lean practices to improve processes and sustain good housekeeping.
• Must be able to wear protective gear and equipment.
• Actively supports and synthesizesNortek’sCore Beliefs : Live Safe, One Team, OwnIt, Ignite Change, LegacyNow
• Maintains an attitude which consistently represents the organizational culture, including : the mission, vision and core attributes
• Other Ad hoc duties as assigned by manager
• Supports Lean Business Enterprise initiatives for continuous process improvement and waste elimination.

Knowledge, Skills and Abilities :

• General sheet metal knowledge
• Capable of lifting 50lbs
• Standing for long periods on concrete
• Quality Assurance
• Attention to detail
• Must have an energetic, results-oriented perspective and be able to motive your team to sustain excellence.
• Experience in a mixed-model manufacturing environment, using lean principles is preferred.
• The ability to work collaboratively within a team environment.
• Must have excellent written and verbal communication skills and strong analytical and problem-solving skills.
• Must be able to read and interpret mechanical drawings and technical specifications.
• Ability to read and interpret production schedules.
• Ability to get along well with a variety of personalities andbackgrounds.
• Ability to act calmlyand complete tasks under stress.
• Reliable, dependable, and trustworthy with all actions related

Job Qualifications

Required :

• Able to read measuring devices.
• Able to read blueprints.
• Must have knowledge of the tools of the trade.
• Able to lift 50 lbs.
• Able to stand for prolonged periods on a concrete floor.
• Able to work independently and in a team environment.
• Able to pass a weld test.
• Able to follow instructions.
• Able to read, write, speak English.
• High school diploma or equivalent, preferred. Completion of some secondary / trade school technical and / or general business course is preferred.
• Requires a minimum of2yearsof similar work experience in welding or construction experience.

Who we are

Nortek Data Center Cooling is a Madison Industries company.Madison Industries is one of the largest and most successful privately held companies in the world and has a robust portfolio of indoor air quality solutions.

Madison builds entrepreneurially driven, branded market leaders that are committed to making the world safer,healthierand more productive by creating innovative solutions that deliver outstanding customer value.

At Nortek Data Center Cooling, we’re shaping the future by Creating a Better Tomorrow Every Day!We are apremierHVAC company offering energy efficient and sustainable productsand solutions that exceedcustomer expectations through our employees’ commitment to quality, customer experience and operational excellence.

Our success depends on YOU!As a member of the NAS team :

• You are the lever to drive profitable growth and meaningful change.
• You are closest to customers / markets and understand our business.
• We move quickly.You can make the right decisions daily.
• You are where success begins and ends.
• Each of you can help make us better every day.

Equal Opportunity & Non-Discrimination Nortek Data Center Cooling. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status,sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law.

Overview

This is your opportunity to join the Fence industry leader!

Master Halco , one of the nation's largest wholesale distributors of fencing products is seeking a Welder to work at our branch.

The welder will primarily work on gating systems.

The Welder's responsibilities include :

• Prepare, cut pipe sections using table or jig saw, then setup lay-up sections
• Weld pipe using MIG / ARC welding equipment and techniques.
• Complete projects using manufacturing work orders and / or verbal instructions
• Locate materials to complete project

This is a very exciting time to join our company. We are continuing to grow (70 locations), introducing new products, making technological investments, and implementing innovative marketing strategies.

We are also focused on our people our most important resource. At Master Halco, we believe in transparency, open communication, and rewarding success with a path to fully develop your potential while building a career.

If you enjoy a fast-paced work environment and the opportunity to show us your best customer service skills, this is the right place for you!

Working With Us Has Its Rewards :

• Competitive wage at $20 per hour
• Eligible for a wage progression plan with pay increases of 50 Cents every 6 months over a 3 year period
• Monday through Friday schedule, day shift
• A competitive health care plan typically effective after 31st day of employment
• A generous matching 401(k) plan
• Tuition reimbursement up to $10K per academic year
• Bonus Opportunities
• A generous paid-time off package, and more

Master Halco offers advancement opportunities at every level. We are always looking for people with the drive to learn and determination to succeed.

Responsibilities

• Uses verbal or written instruction from work orders and collects materials for processing
• Cuts pipe using pipe cutting equipment
• Lays out pipe sections on a jig or table and welds with MIG / ARC welding equipment and techniques, applies cold galvanizing solution to protect welds
• Performs visual inspection on completed work ensuring quality
• Maintains a clean and safe work area
• Performs other warehouse and gate fabrication duties as required

Qualifications

• 2-3 years welding experience with MIG, ARC
• Experience working with hand tools
• Able to lift / move heavy materials (up to 75lbs)
• Ability to read, write and perform basic math functions
• Ability to perform own layouts using jigs
• Ability to work around heat and chemicals
• Must be able to work overtime as needed

Description :

Perform 3G MIG and Flux Core welds on components. Welds will be done on aluminum and steel components. Must be able to pass a welding test to get an offer.

This position is in a non climate controlled facility with opportunity for OT.

Shift & Pay : 1st shift

1st shift

Mon-Thurs

5 : 30AM-4 : 00PM

$20-23 / hr depending on experience

THERE IS CURRENTLY 1 POSITION OPEN FOR THIS JOB

About Aerotek :

We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity.

As a Best of Staffing Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees.

Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year.

Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.