Combination Welders must have industrial welding experience in a petrochemical or related industrial fabrication facility.

Welders having the ability to read and interpret blueprints, ISO's, field drawings, and material takeoffs a plus. Welders will perform a range of duties which will include but is not limited to welding various metals using processes such as SMAW, GMAW, FCAW, and GTAW.

Welders are responsible for selecting, setting up, and staging the proper equipment for their jobs and that each are in ample supply and working order.

This includes welding machines, gases, tools, and other consumables. Welders are also responsible for double checking the fit of pipe or other structural pieces and to allow for proper attachment.

Attention to safety and detail are of the utmost importance. Welders must successfully pass pre-employment weld tests as part of the on-boarding process.

Requirements

• Industrial Combo welding experience with GTAW and SMAW.
• Must pass GTAW & SMAW manual welding procedures test.
• Current Basic Orientation Plus (Safety Council Card) or within 3 months expiration.
• Current TWIC card
• Have three (3) or more years’ experience in your craft. Compliance with designated welding procedures and specifications.

Follow established job-site safety and work regulations, as well as maintaining a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.

• Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and / or similar tubular products;
• install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications;

bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code.Produce quality work, meeting requirements of plans, specifications and industry standards.

Physical Requirements

• Significant and sustained periods of standing, walking, bending, squatting and lifting.
• Good communication skills (speaking and actively listening) with co-workers and supervisors. Must have good manual dexterity to perform precision adjustments of machinery parts and controls.

Will use arms and hands to signal, grab, hold, turn, push, and pull : objects, materials, controls and tools.May be required to lift, carry and move up to 50lbs.

Will work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300’ utilizing proper fall protection.

Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision.Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind;

and must be able to work for long period of times up to 12 hours a day.Will be required to wear personal protective equipment (PPE) including but not limited to : hard hat, safety glasses / goggles, ear plugs / muffs, masks / respirators, safety vests, gloves and steel-toe boots.

We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success.

Equal Opportunity Employer / Veterans / Disabled

Notice to prospective employees : There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies .

Please check our available positions to confirm that a post or email is genuine.

EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR’s normal application process it is probably fraudulent.

REPCON

NO PER DIEM! *

Minimum 5 years of experience in welding processes.

All applicants will be tested.

Job Posted by ApplicantPro

Title : Project Welder / Fabricator Project Location : Lincoln, NE Company Location : Houston, TX or Dallas, TX Shift : 2nd Shift (M-F, 3 : 30 p.

m. to 12 : 00 midnight (possible daily overtime, and Saturday overtime) Estimated Project Duration : 3-6 months with the possibility to extend based on production volume and company needs

Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details!

Project Summary :

The CBSS Project Welder will fabricate and weld pressure vessels, and related components in accordance with the ASME code.

Essential Functions :

• Must have the ability to understand and follow all safety rules.
• Must have the ability to operate the overhead crane, scissor lift, use scaffolding & ladders.
• Must have the ability to work in confined space and up to 25’ heights as required.
• Must have the ability to read blueprints and process sheets accurately.
• Must know, understand, and abide by 5S housekeeping procedures and Lean Manufacturing practices.
• Must understand and use IFS time keeping system to clock on / off jobs correctly and accurately.
• Must demonstrate full competence in meeting safety, quality and production standards.
• Must qualify and maintain the following weld certifications :
• GMAW-S (FCAW), All positions, desired
• GMAW-SC, All positions, desired
• SMAW, All positions, desired
• GTAW, All positions, desired
• Must follow Procedures for Welder performance Qualification Testing.
• Performs work as a Floater in the Fabrication & Assembly, Pressure Vessel, or CNC Departments as assigned.
• Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results.
• Ensure duties and company projects are accomplished in an efficient and cost-effective manner.
• Support peers and management with internal and external projects.
• Adhere to company policies.
• Performs all other job duties as assigned by the Team Leader or Supervisor.

Experience :

• Gas Metal Arc Welding, required.
• Gas Tungsten Arc Welding (TIG) and Shielded Metal Arc Welding (SMAW) and ability to pass a 6G welding test according to ASME code preferred.
• Must be able to work from blueprints and have good mathematics skills.
• Metal Fabrication experience preferred.

Education :

High School degree or GED and 2-year degree in Welding Technology preferred; must have good reading, writing and math skills.

Environmental Factors and Physical Requirements :

Must be able to lift up to 80 lbs. 40 high occasionally and up to 50 lbs. overhead on a regular basis. Must be able to work up to 12 hours standing and walking on hard cement surface and will be required to regularly bend, stretch, stoop, squat and climb ladders.

Must be able to read tape measure; read and interpret blueprints, safety rules, operating / procedure and maintenance instructions.

May work in confined spaces as narrow as 22 in diameter. Will require working in areas up to 25 feet from the ground. Must be able to climb stairs and work in temperature ranges corresponding with the outside ambient temperatures.

Must be able to access all areas of the plant both inside and outside. Will be exposed to noise, dust, dirt, welding fumes and machine lubricants and / or oils.

Must be able and willing to work with and properly use all necessary and / or required personal protective equipment including, but not limited to safety glasses, hearing protection, steel-toed shoes, hard hats and fall protection.

Benefits of Being a Cleaver-Brooks Sales & Service Employee :

We offer a competitive salary and comprehensive benefits package, including medical, dental, vision, flexible spending account, wellness benefits, life insurance, short term and long-term disability, cash matching 401(k) plan, generous vacation and 11 paid holidays.

This description supersedes any previous descriptions for this position.

Posting Details

Job Details

Description

Holt CAT is the largest Caterpillar dealership of heavy equipment in the United States. We have a full-time, Field Welder / Machinist position available at one of our South Texas locations.

Hours are full time Monday Friday 7 AM - 4 PM, with possible overtime hours. This position is responsible for providing heavy equipment welding and machinist repair service to meet our customer's needs.

Job Description :

This position is responsible for providing equipment welding and machinist repair service to meet our customer's needs. This service needs to be performed in a positive, caring, and timely manner.

A qualified candidate must perform complex machining and stick welding repairs correctly.

Qualifications :

A qualified candidate must have the following skills or abilities :

• Must have 2-5 years of Welding and Machinist experience.
• Stick welding and Flux Core experience are required .
• Must have a valid driver's license .
• Ability to obtain a CDL is required.
• High School Diploma or GED
• Must be a self-motivated, thoughtful individual with a high energy level who can work well in a shop environment.
• Must be able to get along well with other employees. Excellent interpersonal skills.
• Must be able to work the required hours and days as described above.
• Must have excellent attendance.
• Must have a steady employment history.
• Heavy equipment welding experience is highly desired.

Qualifications

Skills

Behaviors

Motivations

Education

Experience

Licenses & Certifications

Equal Opportunity Employer / Protected Veterans / Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant.

However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

Welder-00028535

Description

Contribute. Grow. Lead with OxyChem. Looking for a challenge? Desire to achieve your true potential? OxyChem is a growing, action-oriented, safety driven chemical manufacturing company continually striving to be the best in the business while staying focused on environmental protection.

The secret to our success has and will continue to be our people.

Occidental Chemical Corporation (OxyChem) is a leading North American manufacturer of polyvinyl chloride (PVC) resins, chlorine and caustic soda key building blocks for a variety of indispensable products such as plastics, pharmaceuticals and water treatment chemicals.

Other OxyChem products include caustic potash, chlorinated organics, sodium silicates, chlorinated isocyanurates and calcium chloride.

OxyChem's market position is among the top three producers in the United States in 2021 for the principal products it manufactures and markets.

Based in Dallas, Texas, the company has manufacturing facilities in the , Canada and Latin America.

In a fast-paced industry that demands precision, we create a supportive workplace where the safety and well-being of our employees are paramount.

We are committed to rewarding top performers, offering very competitive pay and benefits, and providing tremendous career development opportunities.

We are looking for an experienced and self-motivated individual to fill the position of Welder within our Chemical Manufacturing Plant located in Gregory, Texas.

Essential