Pay $26.00Night shift Stick, Mig, Flux, and Sub Arc welding on stainless and carbon, some chrome and satellite. Previous pressure vessel experience.

Must have Submerged Arc Experience Shall report to the Managers of Production / Field Service, Operations and also the shop supervisor and lead man.

Shall be competent to pass a welding test on ½ - 4 plate or pipe per ASME Section VIII. Should also have 2 years’ minimum experience in their craft working with carbon, stainless steels, low alloy and nickel based materials.

Must be able to read engineering drawings and welding procedures. Observed test on welded surfaces to evaluate weld quality and conformance to specifications.

Welds components in flat, vertical or overhead positions. Ignite torch and adjust valves, amperage and voltage to obtain desired flame or arc.

Analyze engineering drawings and specifications to plan welding operations. Physical demands include ability to walk, bend, climb, crouch and crawl is essential, as well as being physically able to work in a confined space.

Must be able to withstand fluctuations in temperature and be able to work in hot, humid, or cold work environments. Other physical requirements include being able to pull, push and lift at least 50 pounds occasionally.

Must be able to follow all safety rules and work towards achieving quality policy objectives.Please send resumes to [email protected] Powered by JazzHR

JOB DESCRIPTION Job Description

Excellent opportunity for individuals that take exceptional pride in their work!

Now hiring entry level Spot Welder!

First Shift, Monday - Friday 7am to 3 : 30 pm + Saturdays for overtime AS NEEDED 6am-1pm

$12.50 / hr Regular pay, $18.75 / hr Overtime pay

As an Ōnin Teammate, you are a key part of a successful team!

Duties may include but not limited to :

• Operate safety equipment and use safe work habits
• Weld components in flat, vertical, or overhead positions
• Recognize, set up, and operate hand and power tools common to the welding trade
• Machine & tool operation
• General labor

Requirements :

• Steel toe shoes
• Reliable transportation
• Overtime availability

Benefits

Get the benefits, respect, and life you deserve at Ōnin Staffing. Get a job, a better quality of life, and be treated like a member of our team.

Teammates are rewarded and valued. If you want a better life, join us! It’s time to upgrade

Every Ōnin Job comes with these amazing benefits after just 30 days and for less than $18 per week!

• $5 Prescription Drugs
• $5 Doctor's Visit Copays
• Free Teledoctor Service
• Free Counseling Services
• Life Insurance Included
• Vision Insurance Included
• Dental Insurance Included
• Vacation and Holiday Pay
• Scholarship Opportunities
• NEW! 401(k) Retirement
• NEW! Free Legal Services

If you're interested in this opportunity please apply online or come by our office located at 7040 N. Mesa St Suite O El Paso, Tx 79912

Fence Crew Welder

Alabama, USA Arkansas, USA Florida, USA Forney, TX 75126, USA Georgia, USA Louisiana, USA Mississippi, USA North Carolina, USA Oklahoma, USA South Carolina, USA Tennessee, USA Texas, USA Virginia, USA Req #1913 Thursday, April 27, 2023

Valfair Construction is in search of a welder to join the Fence Crew. The welder will work directly under the Fence Crew Superintendent and will weld fence materials according to the job site specifications along with directions from the job site supervisor.

• Experience with stick welding on iron and galvanized steel
• Fencing install on multiple job sites
• Fabricating fencing materials to meet job needs
• Properly follows company safety procedures. Brings problems to the attention of the foreman, superintendent, safety director or HR manager.
• Performs routine inspection and preventive maintenance on assigned equipment and refers defects or needed repairs to the supervisor; cleans equipment.
• Must be able to pass a drug test and criminal background check
• Must be able to multi-task in a fast-paced environment
• Strong attention to detail
• Occasional O.T. as needed
• HS diploma or GED preferred

Other details

• Pay Type Hourly
• Travel Required Yes
• Alabama, USA
• Arkansas, USA
• Florida, USA
• Forney, TX 75126, USA
• Georgia, USA
• Louisiana, USA
• Mississippi, USA
• North Carolina, USA
• Oklahoma, USA
• South Carolina, USA
• Tennessee, USA
• Texas, USA
• Virginia, USA

Share this job :

Job Description

Onin Staffing is hiring for a Welder Position in the area of Santa Teresa!

If you are a Welder, we want you on our team.

• Able to pass TIG / ALUM test
• Must have Gear

We pay weekly and offer benefits less than $18.00!!

$5 Prescription Drugs

$5 Doctor's Visit Copays

Free Teledoctor Service

Vision Insurance Included

Dental Insurance Included

Vacation and Holiday Pay

Scholarship Opportunities

Apply in person N Mesa Suite O El Paso, TX . or Call to schedule an interview.

Job Description

SUMMARY

Performs either spot welding or electrical welding of various parts assemblies as required by production and by shop pack instructions.

Checks component parts for proper dimensions and quality. May report parts shortages to supervisor and planning department personnel.

Coordinates build with unit line rate, reports any unusual conditions of equipment operation or part variances.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Follows all company safety rules and policies.
• Daily inspection of welding PPE, inspect electrical and all gas connection (connectors, gas fitting, cables, hoses, and all water cooling systems) to insure welding machine is still in good condition for safe operation before use.
• Uses electrical welding technique to weld parts of units to include, but not limited to, corner doors, drip pans, S / S tops, frames, and glass door frames.
• Checks specific component for proper dimensions and quality.
• Reads job traveler to determine various parts and assemblies required, and coordinate with appropriate personnel to obtain the correct required components.
• May install / weld various assembled parts according to job traveler or supervisor instructions.
• Rechecks shop pack for correctness.
• Inspects products and processes while performing job duties to ensure all work done meets or exceeds standards of the company’s quality program.
• Works cooperatively and congenially with co-workers to achieve cohesive and productive work processes and work environment.
• Performs additional tasks as assigned by management or as the situation requires.

Qualifications

• Minimum six months experience required in GTAW (TIG welding) or electrical welding techniques.
• Prefer Electrical welders have six months to one year of electrical welding school.
• Ability to follow verbal and written instructions regarding techniques required for general assembly work.
• Ability to weld thin gauge metals
• Ability to read and understand simple blueprints.
• Ability to use a variety of small hand tools, power tools, and welding equipment.
• Possess basic mechanical aptitude and ability.
• Ability to communicate clearly with other co-workers to coordinate number and type of assemblies required.

Education and Work Experience

High school diploma or GED

Certificates and Licenses

Welding certification is required

PHYSICAL DEMANDS

• Attend work regularly and report promptly for duty on the days and at the times scheduled by the supervisor.
• Schedule changes occur and should be handled in a productive manner
• Working temperatures vary with seasonal changes and where climate control is limited. The environment is one in which noise exists.
• Sit on a forklift, stand, and / or walk for a combined minimum of eight (8) hours per day on a concrete surface.
• Lift and carry components, tools, or other items weighing more than 35 pounds. Any item over 35 pounds, is to be done with assistance
• May perform combination of physical movements to reach areas difficult to access including bending, stooping, squatting, reaching, twisting and rotation motions using head / neck, arms, wrists, waist, knees and arms while performing duties.
• Pull and push up to 100 pounds.
• Handle small hand tools, power tools, and welding equipment. Handling may be done unilaterally (one-handed) or bilaterally (two-handed) depending on size and shape of object and task being performed.
• Need corrected vision to be aware of surroundings and location of items needed and perform various other job duties.
• Need corrected hearing to identify conditions in the environment (i.e. forklift horns, fire alarms).
• Need mental alertness to identify, avoid, or resolve safety hazards.
• Ability to communicate with supervisors and co-workers.
• Ability to work in a welding area with welding screens.
• Ability to wear designated personal protective equipment for the work assignment (i.e. welding hood, welding jackets, welding gloves).

Additional Information

Benefits :

Take this opportunity to join a successful and enthusiastic global team where you can make a significant impact immediately.

You will enjoy a competitive salary and a generous benefits package that includes health, dental, life, LTD insurance, 401k (with company match), employee assistance, wellness and 100% tuition reimbursement programs.

ITW is an Equal Opportunity / Affirmative Action employer.

ITW is an equal opportunity employer. We value our colleagues’ unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential.

As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship.

All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.