Full-time Position, Available on : 2023-06-26

Specific Duties and Responsibilities :

• Fabricate and repair various types and thickness of steel
• Perform MIG, TIG, STICK welding on various types of steel
• Layout, read, and interpret blueprints
• Make decisions on what equipment and tooling to use
• Work with CPVC pipe materials
• Miscellaneous duties are assigned as needed
• Report to Production Manager and Shop Supervisor for work direction and update status of work activities

Education / Experience / Skills Required :

• Minimum high school diploma, vocational training helpful
• Thorough knowledge of fabrication and proper welding settings
• Ability to read and work from basic drawing with little explanation to complete tasks
• Excellent mechanical aptitude
• Fabrication experience a must
• Good hand / eye coordination
• Ability to work with small hand tools
• Ability to read tape measure and understand decimal equivalents
• CNC Plasma table experience preferred

Physical Requirements :

• Ability to frequently lift and carry up to and including 20 pounds, up to and including 50 pounds occasionally.
• Ability to stand up to eight hours per day
• Ability to reach for and grasp tools and parts on an occasional to frequent basis
• Ability to bend, twist, kneel and climb ladders occasionally

Additional information :

• Works independently with little or no supervision
• Frequent Overtime to include weekends
• Must have own tools

Job Type : Full-time Job Type : Full-time Pay : $20.00 $24.00 per hour

Education : High school or equivalent (Preferred) Experience :

Why work with Herr Industrial?

In addition to offering competitive pay and benefits, we are committed to furthering the career development of our employees.

We believe in providing training and career development opportunities for employees who demonstrate a strong work ethic, think creatively, and manage time and projects efficiently and safely.

Job Purpose :

Stitch weld, full weld components and assemblies with GMAW process. Knowledge of oxy / acetylene and plasma cutter use a plus.

Must be able to read tape measure and basic print reading. Will also use basic hand tools and grinder at times.

Job Summary :

This position reports to the Plant Manager or a Department Supervisor. The ideal candidate should possess knowledge of machines and tools including their design, uses, repair, and maintenance.

Responsibilities :

• Accident prevention actively identify, correct and / or report safety hazards to prevent accidents.
• Actively identify and pursue cost reduction and efficiency / profit improvement opportunities.
• Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product.
• Reads blueprints.
• Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers.
• Drill and punch holes in metal, for screws, bolts, and rivets.
• Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items.
• Fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
• Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools.
• Operate safety equipment and use safe work habits.
• Weld components in flat, vertical, or overhead positions.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Will also use basic hand tools and grinder at times
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.

Performs other duties as assigned.

• Lifting production objects of up to 50lbs.
• Performs other duties as assigned.
• Must be able to fulfill essential job function in a consistent state of alertness and safe manner.

Education : High school diploma or equivalent

Experience : The candidate should possess 0 2 years of welding experience, able to read blueprints. Must pass AWS 4G welding test.

Knowledge of oxy / acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading.

Why work for Sea Box?

• Competitive salary
• 401k employer match
• Paid vacation and holidays
• Paid vacation and holidays
• Medical / Dental / Group Life Insurance
• Quarterly safety incentive bonus when goals are met
• Strong company growth with emphasis on employee advancement
• Long list of unusual benefits, including birthday breakfast with CEO, turkey for Thanksgiving and many others.

Location : This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and / or working outside of the Company's normal 8 : 30am 5 : 30pm hours of operation.

WE ARE AN EQUAL OPPORTUNITY EMPLOYER COMMITTED TO HIRING A DIVERSE WORKFORCE.

EOE / Minorities / Females / Veterans / Disability

PI222745637

Essential Duties & Responsibilities - May include any / all of the following :

• Lay out full scale drawings of pipe systems, supports, or related equipment according to blueprints.
• Lay out, assemble, install, and maintain pipe systems.
• Cut, thread, or hammer pipes to specifications using tools such as saws, cutting torches, pipe threaders, or pipe benders.
• Plans installation or repair to avoid obstructions and to avoid interfering with activities of other workers.
• Bends pipe using pipe bending tools and pipe bending machine.
• Secures pipes to structure with brackets, clamps, and hangers using hand tools and power tools.
• Measure and mark pipes for cutting and threading.
• Assemble or secure pipes, tubes, fittings, or related equipment according to specifications by welding, brazing, cementing, soldering, or threading joints.
• Connects pipes using threaded, caulked, soldered, brazed, fused, or cemented joints and hand tools.
• Cut metal components for installation.
• Fabricate parts or components.
• Create construction or installation diagrams, draw sketches for pipe patterns.
• Install plumbing or piping.
• Weld metal components.
• Inspect, examine, or test installed systems or pipelines using pressure gauge, hydrostatic testing, observation or other methods.
• Lays out, positions, and secures parts and assembles according to specifications, using straight edge, combination square, calipers, and ruler
• Tack-welds or welds components and assembles using electric, gas, arc, or other welding equipment.
• Cuts work piece, using powered saws hand shears or chipping knife
• Melts lead bar, wire, or scrap to add lead to joint or to extrude melted scrap into reusable form.
• Installs or repairs equipment such as lead pipes, valves, floors, and tank linings.
• Observes tests on welded surfaces such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications.
• Inspects grooves, angles, or gap allowances using a micrometer, caliper, and precision measuring instruments.
• Removes rough spots from work piece, using portable grinder, hand file or scraper.
• Welds components in flat, vertical, or overhead positions.
• Heats, forms, and dresses metal parts using hand tools, torch, or arc welding equipment.
• Ignites torch and adjusts valves, amperage, or voltage to obtain desired flame or arc /
• Analyzes engineering drawing and specifications to play layout, assembly, and welding operations.
• Develops templates and other work aids to hold and align parts.
• Use safe work habits and operate safety equipment properly.
• Determines equipment and welding method, applying knowledge or metallurgy, geometry, and welding techniques.
• Examine workpieces for defects.
• Measure workpieces with straightedges or templates to meet specifications.
• Primarily uses stick welding 60-10 and 70-18. Need to be able to certify in 6G position.
• Documents tests and inspection dates and results.
• Maintains inventory records for welding supplies used and utilized on jobs.
• Use straightedges, combination squares, rulers, and calipers to lay out, position, alight, and secure parts and assemblies prior to assembly.
• Operate hand and power tools such as shielded metal arc and gas metal arc welding equipment.
• Completes work orders, list materials issued and used, and documents work repairs.
• Assists area staff as needed.
• Ensures that management is appropriately informed of area activities and of any significant problems.

Equal Opportunity Employer, including disabled and veterans.

Full-time Position, Available on : 2023-06-29

Welder

A day in the life of a Welder at REV :

Perform all GMAW (MIG) and GTAW (TIG welding procedures including machine settings, bottles, and necessary fittings

Welding Aluminum and set up and maintaining welding machine (tip, liner, changes, etc.) and welding vertical, horizontal, and overhead.

Inspect welds for cracks, burn through and weld spatter.

Welding of stainless steel where required

Grind and clean areas where required

Stay current in TPM (Total Productive Maintenance) and basic mechanical adjustments on all equipment as needed

Follow hazardous waste disposal program and fire prevention procedures

Required education, skills, and experience to be successful :

Preferred 1-year experience in a manufacturing environment

Preferred high school diploma or GED

Ability to read and use a tape measure for precise measurements

Must read blueprints, and engineering drawings and perform shop math to layout, fabricate and weld various parts and assemblies

Must process knowledge and experience in GMAW (MIG) and GTAW (TIG welding machine

Ability to communicate professionally and follow directions

Ability to work in a team environment

Successful completion of the drug and background screening

Physical demands in this role :

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Frequent bending, stooping, squatting, and climbing up and down ladders.

Ability to work with arms above head

Ability to operate and understand the operation of all protective safety equipment in the area.

Ability to lift up to 40 lbs. without assistance

Ability to work in non-temperature-controlled environments

What makes REV unique :

Medical, dental and vision benefits start day one

Military friendly employer

Education reimbursement

Career development and advancement opportunities

Opportunities to relocate to other REV locations

All of our products are made in the USA

Overview

We’re Good at What We Do!

MEC has been named the largest metal fabricator in the nation for 13 years running and we’re just getting started. Mayville Engineering Company (MEC) is a continually growing manufacturing company that’s been around for 75 years.

However, don’t let our age fool you. We have some of the most state-of-the-art equipment and machines in the business.

We’re looking for ROBOTIC WELDERS that exhibit a strong work ethic, dependability and believes in our company values.

We Offer :

• Competitive Wages
• 12% Shift Premium
• State of the art equipment / machines
• $1,000 Sign on Bonus
• 401K Match
• On Site Health Center with Benefits starting after only 30 days

Why Should you Apply at MEC?

• Now under new Leadership
• Continuous Learning Opportunities
• Flexible Scheduling including Part Time Options
• Weekly Kaizen Events / Lean Management Improvements

Responsibilities

What it takes to be a ROBOTIC WELDER with MEC :

• High school diploma or general education degree (GED), or one year related experience and / or training is preferred.
• Ability to train and work with others (Team Concept).
• Ability to do basic math
• Be able to lift and move 50 pounds
• AWS certified or the ability to become AWS certified
• Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
• Displays ethical behavior and acts with integrity
• Reliability

What you will be doing as a ROBOTIC WELDER :

• Responsible for product quality, workmanship and process applications consistent with the company’s manufacturing objectives.
• Follows safety guidelines and monitors use of safety devices, equipment, departmental housekeeping, and maintain constant alert for hazardous conditions.
• Maintain conformance with Company work rules and regulations.
• Trained and certified for all welding operations, methods and processes.
• Operational and Setup knowledge of automated and robotic weld cells.
• Operational and Setup knowledge of resistance welders.
• Knowledgeable on Welding Specification requirements, print reading, and weld evaluation techniques.
• Weld process, automated fixture and machine trouble shooting skills.
• Other duties may be assigned.

Options

Sorry the Share function is not working properly at this moment. Please refresh the page and try again later. Share On Social Media

Software Powered by iCIMS