Purpose and Essential Duties

The Pipe Welder will perform welding procedures according to code based on the project needs and specifications.

• Perform welding tasks at a level that meets job specifications.
• Mark the welds made as directed by company policy.
• Clean and paint all welds as required by the job specifications.
• Assist Fitter as needed.
• Complete and maintain a weld map if required.

This position is Full Time, Non-Exempt, and reports to the Pipefitter Foreman.

Required Education, Experience, and Qualifications :

• Must be able to pass a 6G SMAW & GMAW X-ray test.
• Must be able to weld 30in bore pipe.
• Minimum 2 years of experience in commercial mechanical piping.
• Basic OSHA 10 hour safety.
• Operate an oxygen and acetylene burning rig, cutting and beveling pipe.
• Ability to work overtime when required.

Travel Requirements

Infrequent travel to Company or client locations. Approximately 10% of time will be spent traveling. Must be willing to travel to Alexandria, LA for the first few months of the job.

Physical / Work Environment Requirements

Essential

Must be able to lift heavy objects up to 50lbs, be able to bend / stoop, squat / crouch, climb, kneel and twist. Must be able to climb ladders, work both inside and outside, and around moving equipment safely.

Bernhard is proud to be an

Pipe Welder Bilfinger Inc. known as a leading one-stop shop provider for complex industrial services is seeking Tube Welders for our Pensacola, FL facility.

Responsibilities : Safety is a priority; employee must understand construction risks and bring them to the attention of their supervisor.

Must be able to TIG, stick, and / or orbital weld on stainless and / or carbon (pipe size and material welded varies per site) Test and inspect welded surfaces and structure to discover flaws to ensure finish product meets site standards Determine the appropriate welding equipment or method based on requirements and specifications Read blueprints and drawings and take or read measurements to plan layout and develop fabrication and installation plans Requirements : Must be able to pass tube welding test.

Quality minded, positive team player, safety conscious and production focused. Have basic math, reading, writing and computer skills.

Proficient in blueprint reading Must pass required weld tests NCCER certification is a plus Ability to work at heights greater than six feet off of the ground Knowledge of relative safety standards and willingness to use protective equipment (face-shield, gloves, safety harness, etc.) Powered by JazzHR

Overview

The Tack Welder will ensure tack welds are made strong enough to sustain the stressors affecting them. Will hold in place the assembled components, complement the function of a fixture and permit the assembly removal from it if necessary.

Controls and contrasts component movement and distortion of the structure during welding, and temporarily ensures the assembly’s mechanical strength when hoisted, moved, manipulated or overturned, if designed for that purpose.

Must possess the ability to set up equipment and weld either pipe, plate or structural steel using arc, gas-shielded arc, or gas welding equipment.

Will obtain certification as necessary. Must learn and understand all safety hazards related to the work and also learn to safely and effectively use or operate work related tools and equipment.

Will be required to work in a plant operations or construction jobsite setting.

Responsibilities

• The following are intended as general illustrations of the work in this job class and are not all-inclusive for this position.
• Work with fabricator to locate fittings and pipe needed to fabricate the spool on the ISO
• Operate cleaning of pipe and fittings with power and air tools
• Perform simple piping installations and repairs
• Assist in fitting of spools to be fabricated
• Use torch for preheating if required
• Assist other mechanics / craft workers as needed

Qualifications

Physical

• Must be able to push / pull, lift, or carry up to 50 lbs., but may occasionally push / pull, lift, or carry up to 100 lbs.
• Subject to repetitive use of hands / arms, and legs
• Hand / eye coordination
• Must be able to communicate (hear, comprehend, and speak) to safely perform work
• Will need to be able to perform sedentary to heavy work
• May operate hand and power tools (electric, gas, and pneumatic) of all types
• Climb and maintain balance on steel / wood framework, stairs, ladders and scaffolds
• Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis
• Position may require prolonged bending / twisting, walking, crawling, kneeling, reaching overhead, squatting, pushing / pulling, or standing and lifting
• Must be able to walk on uneven surfaces, muddy conditions, loose rock, loose / soft sand, etc.
• May be required to work in confined spaces
• Will be exposed to adverse weather conditions (Heat, Cold, Rain, Etc.)

Mental

• Must have the ability to communicate effectively with management / supervision
• Work at various tempos, and concentrate amid distractions
• Decision making skills necessary
• Detail-oriented; must be able to remember, examine, and observe details

Options

Sorry the Share function is not working properly at this moment. Please refresh the page and try again later. Share on your newsfeed

Software Powered by iCIMS

Job Description

SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes.

May require x-ray qualities.

Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms

such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy.

RESPONSIBILITIES

• Selects type and size of pipe or other related materials and equipment according to specifications.
• Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques.
• May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes.
• Lays out, positions, aligns and fits components together in various body positions.
• Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment.

May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together.

• Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor.
• Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun.
• Starts power supply to produce electric current.
• Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece.
• Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle.
• May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath.

May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper.

May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes.

• Examines weld for bead size and other specifications.
• Loads, transports and unloads material, tools, equipment and supplies.
• May assist in lifting, positioning and securing of materials and work pieces during installation.
• Performs minor maintenance or cleaning activities of tools and equipment.
• Assists other mechanics as needed.
• Respiratory protection is common and may be required.
• Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in.
• Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Requirements

JOB REQUIREMENTS

• Work within precise limits or standards of accuracy.
• Make decisions based on measurable criteria.
• Apply basic mathematics to solve problems.
• Plan work and select proper tools.
• Visualize objects in three dimensions from plans and drawings.
• Compare and see differences in the size, shape and form of lines, figures and objects.

QUALIFICATIONS

May require a high school diploma or its equivalent with previous years of experience in the field or in a related area.

Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job.

Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager.

PHYSICAL REQUIREMENTS

1. Strength :

a. Standing 50% Walking 20% Sitting 30%

b. Lifting 35 lb.

Carrying 35 lb.

Pushing 0 ft-lb.

Pulling 0 ft-lb.

2. Climbing O

Balancing O

3. Stooping O

Kneeling O

Crouching O

Crawling O

Reaching C

Handling C

Fingering C

EXPLANATION OF SYMBOLS

NP Not Present

O Occasionally (0-33%)F Frequently (34-66%)C Constantly (67-100%)

Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and / or beliefs, or any other characteristic protected by federal, state, or local law.

BENEFITS : Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule.

We support career advancement through professional training and development.

Occupation as an Industrial Pipe Welder, under the direction and supervision of designated Field Foreman, General Foreman or Superintendent(s), duties include but are not limited to a strong understanding of industrial piping systems, including installation, maintenance, and repair.

Ability to read and interpret blueprints and drawings. Delegate tasks and assist with training for other employees. Support activities at all Swinerton jobsites as directed.

POSITION RESPONSIBILITIES AND DUTIES

• Install, repair, and maintain industrial piping systems
• Interpret blueprints, drawings, and specifications to determine the layout and materials required for the job
• Measure and cut piping to required lengths, using cutting tools and machines
• Weld or solder piping together, using various techniques
• Proficient in tig and stick welding
• Install and maintain valves, gauges, and other fittings
• Inspect and test piping systems for leaks or other defects
• Troubleshoot and repair piping systems as necessary
• Work with other members of the team to ensure projects are completed on time and within budget

MINIMUM SKILLS AND EXPERIENCE

• Ability to read and interpret blueprints, drawings, and specifications
• Knowledge of piping systems, including installation, maintenance, and repair
• Experience with welding and soldering techniques
• Ability to learn new skills with attention to detail.
• Lift and / or pull 50lbs.
• Climb ladders, work off of ladders, man lifts or other equipment.
• Willingness to work in various locations and conditions, including outdoors and in confined spaces
• Ability to maintain a standing position for extended periods of time, fully squat, bend or kneel while wearing a tool belt.
• Ability to work independently or as part of a team
• Knowledge of safety procedures and regulations related to piping systems
• Experience working in an industrial or manufacturing environment
• Uphold Swinerton’s Core Values of Integrity, Leadership, Passion and Excellence at all times.
• Adhere to all OSHA and Swinerton safety practices and procedures.
• Knowledge of the proper use of required tools including : various welding / torch machines, appropriate welding support tools

Hourly Rate : $25.00 - $35.00