Job Summary

Under general supervision, applies appropriate welds to fabricate or repair compactors, containers and carts.

II. Essential Duties and Responsibilities

To perform this job successfully, an individual must be able to perform the following tasks.

• Performs minor repairs and applies basic welding processes.
• Repairs compactors, containers and carts.
• Performs preventive maintenance inspections, diagnostic and repair of electrical and hydraulic systems on compactors.
• Qualified in the welding processes such as arc welding, gas welding, aluminum welding, brazing, and soft soldering on a variety of materials.
• Conducts safety checks on compactors and containers.
• Completes required paperwork utilizing fleet maintenance software program associated with repairing compactors and containers, documenting parts usage, and accounting for repair times.
• Assists senior welders in the completion of project work.
• Performs service calls for compactor repair.
• Performs related work such as flame cutting, bending, forming, beveling, notching of metal and plastic parts.
• Performs all work within Standard Repair Times (SRTs).
• Works from prints, drawings and verbal instructions.
• Performs standard layouts and set-ups of dimensions and tolerances.
• Utilizes standard shop hand tools, measuring devices and equipment.
• Performs other maintenance related work as required.
• Maintains a clean, safe work area in compliance with Corporate / OSHA Standards.
• Performs all work in accordance with established safety procedures.

III. Supervisory Responsibilities

This job has no supervisory duties.

IV. Qualifications

The requirements listed below are representative of the qualifications necessary to perform the job.

A. Education and Experience

• Education : Not required.
• Experience : 2 years of relevant experience.

B. Certificates, Licenses, Registrations or Other Requirements

Required : Valid driver s license.

C. Other Knowledge, Skills or Abilities Required

• Basic skills in welding techniques; knowledge of safety procedures and practices necessary while operating or repairing compactors, containers and carts;
• skill in operating tools equipment, parts and procedures utilized during the repair and servicing of compactors, containers and carts;
• skill in repair of special purpose equipment; ability to perform repairs on a variety of compactors, containers and carts;

and ability to utilize fleet maintenance software program may be required.

V. Work Environment

Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.

• Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day;
• Required to exert physical effort in handling objects less than pounds occasionally;
• Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) rarely;
• Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements rarely;
• Normal setting for this job is : repair / maintenance shop.

Note : The level of physical effort may vary from site to site and in some cases be greater or lesser than documented here.

Benefits

At Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability.

As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days.

Please note that benefits may vary by site.

Purpose and Essential Duties

The Pipe Welder will perform welding procedures according to code based on the project needs and specifications.

• Perform welding tasks at a level that meets job specifications.
• Mark the welds made as directed by company policy.
• Clean and paint all welds as required by the job specifications.
• Assist Fitter as needed.
• Complete and maintain a weld map if required.

This position is Full Time, Non-Exempt, and reports to the Pipefitter Foreman.

Required Education, Experience, and Qualifications :

• Must be able to pass a 6G SMAW & GMAW X-ray test.
• Must be able to weld 30in bore pipe.
• Minimum 2 years of experience in commercial mechanical piping.
• Basic OSHA 10 hour safety.
• Operate an oxygen and acetylene burning rig, cutting and beveling pipe.
• Ability to work overtime when required.

Travel Requirements

Infrequent travel to Company or client locations. Approximately 10% of time will be spent traveling.

Physical / Work Environment Requirements

Essential

Must be able to lift heavy objects up to 50lbs, be able to bend / stoop, squat / crouch, climb, kneel and twist. Must be able to climb ladders, work both inside and outside, and around moving equipment safely.

Don’t meet every single requirement? Studies have shown that diverse candidates are less likely to apply to jobs unless they meet every single qualification.

At Bernhard, we are dedicated to building a diverse, inclusive and authentic workplace, so if you’re excited about this role but your past experience doesn’t align perfectly with every qualification in the job description, we encourage you to apply anyway.

You may be just the right candidate for this or other roles.

We are proud to be an

Duties and Responsibilities

Ensuring high safety measures while working such as donning protective gear for the face and body

Regularly and consistently demonstrate skill in the areas of MIG, Flux and Tig welding

Welding various metals together.

Fit, tack and weld.

Being aware of the different methods of welding

Examining the equipment after welding and advising maintenance of defects

Planning and set up of welding operations before beginning.

Must know weld symbols.

Laying out, cutting, fitting, measuring, and welding metals to create the desired shape or object.

Demonstrate teamwork by working well with others and responding positively to constructive feedback.

Overview John Bean Technologies Corporation (JBT) is a leading global technology solutions provider to high-value segments of the food and beverage industry with focus on proteins, liquid foods, and automated guided vehicles.

JBT designs, produces, and services sophisticated products and systems for multi-national and regional food companies through its FoodTech segment.

JBT also sells critical equipment and services to domestic and international air transportation customers through its AeroTech segment.

JBT AeroTech manufactures and services airport ground support equipment (plane de-icers, aircraft tow vehicles and cargo loading systems), airport gate equipment (Jetway brand), and military equipment.

The Welder I is responsible for various types of weld preparation, welding and weld finishing operations to manufacture equipment to customer drawings, specifications, or other forms of instruction by using specific welding techniques and Weld experience, advanced skills, and judgment to complete.

Responsibilities Designs, fabricates, joins, and / or repairs equipment, fixtures and various types of metal objects and structures using MIG, TIG, Inner shield, and Flux-cored Arc Welding (Dual shield) techniques Determines layout of weld parts according to drawings and company / customer requirements Welds according to JBT AeroTech specifications.

Applies specialized skills in procedures, techniques, tools, materials and / or equipment in area of expertise Executes welds in all positions including from underneath, to the side, in a variety of shapes such as in a tube, and more Assists during welding of components in areas of expertise.

Teaches other welders proper techniques and procedures for mastered key weldments Assists with design and set-up of work centers Troubleshoots problems, identifies and communicates design discrepancies.

Identifies and suggests design improvements Completes required weld documentation including line check sheets, and material movement paperwork Moves weldment to the next process verifying it meets JBT AeroTech specifications Uses material handling equipment to move parts, components, and weldments from one work or storage area to another as required Recommends improvements to Weldment Procedures.

May draft new procedures as assigned Performs all duties in a safe manner and keeps all employees aware of dangers in work area Practices good housekeeping in work area Responsible for understanding and following all Hazordous Waste Management duties and responsibilities Other projects and responsibilities may be added at the company’s discretion Qualifications High school diploma or GED Technical / vocational / or military training or related experience Two (2) or more years weld experience with at least one (1) years of experience in a similar environment Ability to work productively and cohesively in a diverse and multicultural environment Training Requirements (licenses, programs, or certificates) : Appropriate welding certifications, capable of meeting AWS D1.

1 requirements, problem solving ability, crane and jib certification, and appropriate moving vehicle certifications. Specialized Knowledge, Equipment, and Applications : Knowledge of welding techniques including MIG, TIG, Inner shield, and Flux-cored Arc Welding (Dual shield);

aluminum MIG is a plus Ability to comprehend all engineering blueprints and written Engineering procedures Demonstrated ability in troubleshooting and design discrepancy identification Proficient in all key weldments Ability to use personal computer or workstation Demonstrate ability to use all appropriate tools, measuring devices, forklifts, cranes, and fixtures required Demonstrate strong interpersonal skills and be able to communicate personnel assignments within the department Effectively communicate and solve issues that cross departmental boundaries.

This job description is a general description of essential job functions. It is not intended as an employment contract, nor is it intended to describe all duties someone in this position may perform.

All employees of JBT AeroTech are expected to perform tasks as assigned by supervisory personnel, regardless of job title or routine job duties.

Starting Salary Range : $22 per hour (based on experience) ABOUT JBT AEROTECH We believe that work should be fun as well as challenging.

That's why the company offers the best of both worlds - the growth potential of a company with a developing technology that is unique in its field, plus frequent company-sponsored events and a competitive benefits package that includes medical, dental and vision coverage + a 401K plan.

AN EQUAL OPPORTUNITY EMPLOYER It is the policy of JBT Corporation to provide equal opportunity for qualified persons and not to discriminate against any applicant for employment because of race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, citizenship, or any other characteristic protected by federal, state or local law at the JBT Corporation location to which this application is submitted.

In addition, as a Federal Government contractor, JBT Corporation is an affirmative action employer. If you require accommodation during the application process, please contact the local Human Resources department.

EOE-Females / Minorities / Protected Veterans / Individuals with Disabilities If you have a disability or impairment that prevents you from completing the online application, please seek the assistance of your local employment services agency.

JBT maintains active relationships with local employment services agencies, and they have pledged their support in assisting any applicant needing help in applying.

To find information on agencies throughout the United States, please go to www.careeronestop.org You may also call Susan Cotton at 844-286-4524 if your disability or impairment prevents you from applying online.

NOTE : Do not use this number unless you need assistance because of a disability or impairment. The personnel attending this phone line will not be able to give you a status update regarding your application and will not be the individuals making a decision regarding your employment.

The Mold Maintenance Welder Fabrication and repair of various metal parts using different types of metal altering machines such as punch presses, drill presses, milling centers, steel welding machines, aluminum welding machines, saws, ironworkers, shear, etc.

Key Responsibilities :

• Must have at least two years of experience welding steel and aluminum using some of the various equipment listed above.
• Must be able to understand and read blueprints.
• Monitor and stock shop supplies necessary to complete projects.
• Must be able to use different types of measuring tools such as calipers, dial indicators, tape measures, etc.
• Must have welding machine setup experience, such as different types of welding guns, saw sets up’s, etc.
• Keep the work area clean and orderly.
• Work with Engineering on upcoming prototypes.
• Perform daily cleanup and inspection of tools needed to complete job tasks.
• Follow the instruction of the Manager / Supervisor / Lead
• Inspects all parts to be complete and up to quality standards.
• Any other duties as assigned by management.
• Must comply with all OSHA and safety procedures.

Qualifications

Skills and abilities for success in this position :

• Give full attention to what other people are saying, taking time to understand the points being made and asking questions as appropriate.
• Must have strong problem-solving skills to resolve issues or errors.
• Understand written sentences and paragraphs in work-related documents.
• Manage one’s own time and respect the time of others.
• Consider the relative costs and benefits of potential actions to choose the most appropriate one.
• Must be able to work effectively as an individual or with a team.
• Must be able to perform tasks under time pressure deadlines.
• Must have strong attention to detail.
• The ability to communicate information and ideas so others will understand.
• The ability to tell when something is wrong or is likely to go wrong.

Physical Requirements :

• Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature.
• Must be able to sit or stand for extended periods of time while performing job duties.
• Must be able to always wear proper safety equipment while in the machine shop.
• Must be able to lift 50 pounds when necessary.
• This is a safety-sensitive position.

Additional Information

WHY APPLY :

• Opportunity to grow with the company and learn skilled trades
• Work for a company that values people, performance and philanthropy
• Join a team that is passionate about making a difference in the world
• Competitive benefits : Health, Dental, Vision & Life Insurance
• Excellent 401K Plan
• Paid Holidays
• Paid Time Off
• Education Assistance
• Job Stability
• Incentive Bonus Plan
• On premise Work-Out facility

All your information will be kept confidential according to EEO guidelines.