Payrate : $18-28 / HR

Job Description

Gap plate test in G2 through G4 positions.

Welders must show they can confidently set up welding rigs.

Flux core test, core pass and layers.

Must show they can start and stop weld path.

Must take a ceramic back tape test and weld simulation.

Fillet welds in G2 to G4 as well as a water tight collar with a tight radius.

Applies appropriate welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials.

Works from blueprints, engineering sketches, charts or work orders.

Lays out and marks points on parts or subassemblies using rule, square, scribe or templates.

Positions pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools.

May inspect completed work for conformance to specifications.

Performs all work in accordance with established safety procedures.

Epsilon Systems Solutions, Inc. is seeking a full time Welder II in San Diego, CA .

Summary : This position welds metal components together to design specifications or repair products, such as machine parts, shipboard equipment, according to layouts, blueprints or work orders, using SWRMC approved welding and brazing procedures with a variety of arc and gas welding equipment.

Duties and Responsibilities :

• Provides welding support certified in Gas Tungsten Arc Welding (TIG), Gas Metal Arc Welding (MIG) and Gas Metal Arc Welding Pulse (GMAW-P) using 5356 filler wire.
• Uses hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
• Welds components in flat, vertical, or overhead positions.
• Ignites torches or starts power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Clamps, holds, tack-welds, heat-bends, grinds or bolts component parts to obtain required configurations and positions for welding.
• Detects faulty operation of equipment or defective materials and notify supervisors.
• Operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, carbon arc, plasma arc, shielded metal arc, resistance welding, submerged arc welding and pipe welding.
• Ensures shop safety and housekeeping are followed
• Ensures all materials and equipment are properly and safely stored, protected, and maintained
• Reports the status and progress of all work to the government supervisor
• Alerts the government supervisor of the causes of work delays
• Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Examines work pieces for defects and measure work pieces with straight edges or templates to ensure conformance with specifications.
• Recognizes, set ups, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Lays out, positions, aligns, and secures parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Performs welding methods using a mirror.

Required Qualifications :

• High School diploma or equivalent
• Minimum 4 years work related experience
• Minimum 2 years specific experience as a qualified production welder
• Ability to obtain and maintain a DBIDS badge
• Ability to communicate verbally and electronically
• Ability to read schematics, follow detailed instructions and be self-motivated
• Ability to read, interpret, and follow detailed oral and written instructions, schematics or drawings and to conduct activities in a safe manner
• Ability to see details at close range (within a few feet of the observer)
• Ability to concentrate on a task over a period of time without being distracted
• Ability to qualify to SWRMC approved welding and brazing procedures
• Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations
• Familiar with a variety of the field's concepts, practices, and procedures
• Knowledge of Qualify Craftsman 301 for civilians
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance
• Knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models

Preferred Qualifications :

• Production welder experience while in the Navy or working as a civilian production welder supporting Navy ship repair or new construction
• Completion of a formal course of vocational or Navy welding training and certification

ADA Notifications :

• Frequent standing, sitting, crawling, kneeling, stooping, crouching, walking, handling, feeling with hands, reaching with arms
• Occasional lifting up to 50 pounds
• Noise conditions range from very quiet to very noisy
• Manual and finger dexterity; able to grasp, manipulate, assemble small objects

Location : San Diego, CA, US

Company : Standard Inspection Services

Additional Locations : Bremerton, WA, US

Level of Experience : Level II

Reports to : Foreman

Non-Exempt

Summary / Objective : Pipe Welders II join pipes. valves and fitting components as specified by layout, prints, diagrams, work orders, or verbal instructions, using hand and powered hand tools, and welding equipment.

They must be familiar with OSHA requirements for safety and hot work onboard naval vessels.

Duties include, but are not limited to :

• Successfully completion pipe welding qualification requirements using Shielded Metal Arc Welding (SMAW) and Gas Tungsten Arc Welding (GTAW) in the restricted 6G position on ferrous and nonferrous materials.
• Setup and adjust various welding equipment and associated accessories.
• Ability to interpret welding symbols-based on the AWS Welding Symbols.
• Familiarity with the workmanship requirements of the following :
• MIL-STD-22, Welded Joint Design,
• S9074-AR-GIB-010 278, Requirements for Fabrication Welding and Inspection, and Casting Inspection and Repair for Machinery, Piping, and Pressure Vessels
• MIL-STD-1689A, Fabrication, Welding, and Inspection of Ships Structure.
• Ability to visually inspect fillet using a fillet weld gauge and butt or groove welds for acceptance.
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education / Experience Required :

• Must be 18 years old.
• High School Diploma or equivalent.
• Completed a structured welding program.
• Must have a valid California driver's license.
• Must possess basic skills (reading, writing and mathematical skills).

Preferred :

• A plus, previous experience in a ship repair environment.
• Understand the Naval Ship Repair requirements and working environment.
• Ability to work with minimum supervision.

Position Type / Expected Hours of Work : This is a full-time position requires 40+ hours of work per week. M-F 0600 - 1430 (or as otherwise assigned by Project Manager) with pre-scheduled overtime as needed.

Work Environment : This job operates in a shipyard work environment.

Travel : This position does require ability to travel.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Must be available to work at heights, confined spaces and have ability to climb staircases and ladders of varying sizes.

May involve carrying objects that weigh up to 50 lbs., frequent stooping, bending, crawling, reaching, and walking.

Work Authorization / Security Clearance (if applicable)

• Eligibility to work in the US.
• Obtaining DBIDS level security clearance.
• OSHA 10 Maritime

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job.

Duties, responsibilities, and activities may change at any time with or without notice.

AAP / EEO Statement

Standard Inspection Services is an Equal Opportunity Employer : minority / female / disability / veteran / sexual orientation, encouraging diversity in the workplace and a drug-free workplace.

Essential Duties and Responsibilities

Effectively handle multiple projects simultaneously in a deadline driven environment

Use and experience of Hand tools

Help maintain a clean room environment

Skills

Versatile in all aspects of fabrication : railing systems, shade structures, staircases, signage, sculpture, architectural details, and furniture

Versed in cutting; capable of safely using a band saw, cold saw, and shear

Fluent in sheet metal forming; capable of using a shear, punch press, press brake, notcher

Read prints, layouts, shear, notch, punch & form sheet metal components (standard box fabrication)

Qualification Requirements

Valid California Driver’s License

Must speak English

Read and work from shop drawings and hand sketches

Capable of transporting, lifting, handling, and installing work

Job Type

Part Time with potential to become Full-Time

There will be a weld test prior to an interview. Please bring your welding helmet, gloves, and measuring tape. You will be denied the test without these.

We are interested in seeing your welding skills as a means of qualifying, but this opening is for a fabricator of custom details.

REPORTS TO : Production Supervision

Overall purpose of job : To work within a team of Pipe Fitters and welders to achieve maximum production in minimum time, standards and quality in keeping with company policies, while maintaining a positive and motivated team environment.

SUMMARY

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the minimum knowledge, skill, and / or ability desired.

The individual must have working knowledge of procedures, strong mechanical aptitude and the ability to follow directions.

The individual must possess experience in the trade and knowledge of ship terminology. The individual must demonstrate ability to interpret job specifications and perform work on marine vessels.

Must be able to follow directions and work with limited supervision. Also, must be willing to develop other team members’ skill level.

ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include but are not limited to the following :

• Read and interpret basic drawings and weld symbols.
• Pass weld test for all Austal USA weld procedures in the 6GR position
• Pass Austal USA TIG weld test procedure for aluminum pipe
• Must be able to perform P1 welds and maintain associated documentation
• Ability to work to Austal Tig Welding standards
• Work to Austal housekeeping procedure
• Inspection of work, identification of potential problems, initiation of corrective actions.
• Increase awareness of Quality procedures within department
• Perform as a productive working team member that meets daily goals set by the supervisor.
• Continuously improve communications and flexibility within the team.
• Help build the team environment.
• Build pride of workmanship and quality through on job training.
• Contribute towards innovation / productivity improvements.
• Assist in the control of waste elimination, e.g. materials, consumables etc.
• Assist supervisor to maintain control of department equipment and its maintenance.
• Must have full set of personal tools
• Work towards the team goal of delivering the vessel on time.
• Always be ready to start shift on time
• Follow Austal guidelines and procedures
• Do not leave job early or return late from break times
• Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage
• Performs and executes work in compliance with NAVSEA STD Items
• Must be able to travel to off-site work locations
• Must follow Austal Off-Site Temporary Assignment Policy (SUP270)

EDUCATION and / or EXPERIENCE

• 1 year minimum work experience as a B-class pipe welder at Austal or 2 years experience in similar role at comparative employer.
• Ability to pass A Class skills validation test to demonstrate welding ability for restricted open root welds
• Ability to successfully complete onboarding procedures in preparation to pass 6GR weld qualification test requirements for copper nickel and stainless steel to meet contract requirements for A Class welding on the vessel

LANGUAGE SKILLS

• Ability to read and comprehend simple instructions, short correspondence, and memos.
• Ability to write simple correspondence.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, divide, and measure using the metric system.

REASONING ABILITY

• Ability to carry out instructions furnished in written, oral, or diagram form.
• Ability to deal with problems that may arise in certain situations.

Liaises With

• Supervisors
• Foremen
• Production Manager
• PDSS Leadership

ADDITIONAL GUIDELINES :

• Candidates must meet the following employment eligibility guidelines to be eligible for employment with Austal USA :
• 18 years of age or older at time of application.
• Able to provide proof of US Person Status
• Willing to submit to a drug screen
• Willing to submit to a background check
• No felony convictions of Theft / Deception or Violent crimes within

seven years from disposition date

No felony convictions of Drug crimes within three years from

disposition date

The ability to obtain and maintain a DBIDS and or any other clearance or

access that may be required if deemed necessary in the scope of your

position responsibilities

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Must be able to tour all vessels and work sites.

While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear.

The employee is occasionally required to sit.

Specific physical requirements include but are not limited to the following :

• Must have the ability to bend, squat, stoop, crawl, and kneel.
• Perform prolonged standing.
• Ability to turn head from side to side and about the vertical axis.
• Lift / push / pull 50lbs on an occasional basis.
• Lift / push / pull up to 20lbs on a frequent basis.
• Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
• Ability to work at heights above 12’ while working from ladders, scaffolding and / or man lifts.
• Able to work at a variety of levels (ex. waist, eye, overhead).
• Demonstrate the ability to safely and appropriately use required tools and equipment.
• Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
• Possess sufficient handgrip and coordination to carry and operate tools and equipment.
• Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.

safely per OSHA standards.

• Ability to withstand cold and hot temperatures.
• Ability to enter 18 x 36 openings and work in confined spaces for prolonged periods of time within OSHA guidelines.
• Able to respond to verbal and audible sounds / commands.
• Able to utilize adequate visual skills.
• Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
• Ability to perceive attributes of an object / material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to humid conditions, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat.

The employee is occasionally exposed to fumes and / or airborne particles, toxic or caustic chemicals, and heat and cold.

The noise level in the work environment is usually very loud. PPE available and MUST be used correctly.

SAFETY

Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.

Salary Range : $25 - $30