Production Test Technician, Kuiper Propulsion
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. The Propulsion team is seeking a Test Technician to join the team to support production acceptance testing of future flight hardware.
Key job responsibilities
• Perform acceptance testing of spacecraft propulsion systems and subsystems
• Support the continued development and improvement of test infrastructure and methods
• Support development and review of test processes and procedures
• Help ensure a high level of quality is maintained while meeting increasing production rate targets
Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
The Propulsion Technician will perform a variety of hardware testing of propulsion subsystems as well as integrated systems to ensure the hardware meets acceptance requirements for flight. They will also work closely with multiple engineering teams to identify process improvements to improve test efficiency. A successful candidate thrives in a fast paced, start-up like environment and is able to apply their technical expertise and commitment to quality to positively impact team metrics and organization goals. To be successful they will need to be highly motivated and detail oriented while showing the highest standards of execution.
About the team
One of the most ambitious missions that Kuiper has undertaken to date, the Kuiper satellite constellation is our solution to providing reliable internet to the entire world. We are looking for talented technicians to help enable full-scale production testing of the Kuiper satellites.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Apply Now
Key job responsibilities
• Perform acceptance testing of spacecraft propulsion systems and subsystems
• Support the continued development and improvement of test infrastructure and methods
• Support development and review of test processes and procedures
• Help ensure a high level of quality is maintained while meeting increasing production rate targets
Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
The Propulsion Technician will perform a variety of hardware testing of propulsion subsystems as well as integrated systems to ensure the hardware meets acceptance requirements for flight. They will also work closely with multiple engineering teams to identify process improvements to improve test efficiency. A successful candidate thrives in a fast paced, start-up like environment and is able to apply their technical expertise and commitment to quality to positively impact team metrics and organization goals. To be successful they will need to be highly motivated and detail oriented while showing the highest standards of execution.
About the team
One of the most ambitious missions that Kuiper has undertaken to date, the Kuiper satellite constellation is our solution to providing reliable internet to the entire world. We are looking for talented technicians to help enable full-scale production testing of the Kuiper satellites.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Related Jobs
Production Test Technician, Kuiper Propulsion
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. The Propulsion team is seeking a Test Technician to join the team to support production acceptance testing of future flight hardware.
Key job responsibilities
• Perform acceptance testing of spacecraft propulsion systems and subsystems
• Support the continued development and improvement of test infrastructure and methods
• Support development and review of test processes and procedures
• Help ensure a high level of quality is maintained while meeting increasing production rate targets
Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
The Propulsion Technician will perform a variety of hardware testing of propulsion subsystems as well as integrated systems to ensure the hardware meets acceptance requirements for flight. They will also work closely with multiple engineering teams to identify process improvements to improve test efficiency. A successful candidate thrives in a fast paced, start-up like environment and is able to apply their technical expertise and commitment to quality to positively impact team metrics and organization goals. To be successful they will need to be highly motivated and detail oriented while showing the highest standards of execution.
About the team
One of the most ambitious missions that Kuiper has undertaken to date, the Kuiper satellite constellation is our solution to providing reliable internet to the entire world. We are looking for talented technicians to help enable full-scale production testing of the Kuiper satellites.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Key job responsibilities
• Perform acceptance testing of spacecraft propulsion systems and subsystems
• Support the continued development and improvement of test infrastructure and methods
• Support development and review of test processes and procedures
• Help ensure a high level of quality is maintained while meeting increasing production rate targets
Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
The Propulsion Technician will perform a variety of hardware testing of propulsion subsystems as well as integrated systems to ensure the hardware meets acceptance requirements for flight. They will also work closely with multiple engineering teams to identify process improvements to improve test efficiency. A successful candidate thrives in a fast paced, start-up like environment and is able to apply their technical expertise and commitment to quality to positively impact team metrics and organization goals. To be successful they will need to be highly motivated and detail oriented while showing the highest standards of execution.
About the team
One of the most ambitious missions that Kuiper has undertaken to date, the Kuiper satellite constellation is our solution to providing reliable internet to the entire world. We are looking for talented technicians to help enable full-scale production testing of the Kuiper satellites.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
MFG Assembly Technician, Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. We are looking for talented technicians to help full-scale production of the Kuiper satellites.
The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.
Key job responsibilities
- Champion safety requirements in all designated zones and work locations
- Assemble and test with emphasis to detail, an assortment of avionic LRUs, electrical-mechanical assemblies, handle and install fiber-optics, and PCBAs
- Ensure lab equipment is maintained and calibrated
- Supports some preventative maintenance activities on test equipment and data acquisition systems
- Identify equipment requirements, process improvements, maintain floor stock inventory
- You will independently execute and prioritize work to meet company deliverables
- Execute test procedures for component and system level testing maintenance
- Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc)
- Your work may include contributing to improving SOPs and safety procedures
Additional Requirements:
- Willing to work all shifts (days, evenings, staggered shifts) overtime and weekends as needed. Estimated shift times 1st shift: 8am-4:30PM Shift will vary, depending on program needs
- Flexible working/commuting in between site locations
- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
- Able to lift-up to 25lbs. unassisted
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
The starting pay for this role in Washington State is up to $37/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.
A day in the life
We are a group of Technicians with well over 20+ years of diverse skills and experience. Each team member brings in willingness to train and positive team energy. Some tasks you may be an individual contributor, but may also work in a group environment to achieve organizational goals. This group of Technicians thrived in success by working as a team. We are currently in research and development but moving towards production environment.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.
Key job responsibilities
- Champion safety requirements in all designated zones and work locations
- Assemble and test with emphasis to detail, an assortment of avionic LRUs, electrical-mechanical assemblies, handle and install fiber-optics, and PCBAs
- Ensure lab equipment is maintained and calibrated
- Supports some preventative maintenance activities on test equipment and data acquisition systems
- Identify equipment requirements, process improvements, maintain floor stock inventory
- You will independently execute and prioritize work to meet company deliverables
- Execute test procedures for component and system level testing maintenance
- Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc)
- Your work may include contributing to improving SOPs and safety procedures
Additional Requirements:
- Willing to work all shifts (days, evenings, staggered shifts) overtime and weekends as needed. Estimated shift times 1st shift: 8am-4:30PM Shift will vary, depending on program needs
- Flexible working/commuting in between site locations
- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
- Able to lift-up to 25lbs. unassisted
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
The starting pay for this role in Washington State is up to $37/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.
A day in the life
We are a group of Technicians with well over 20+ years of diverse skills and experience. Each team member brings in willingness to train and positive team energy. Some tasks you may be an individual contributor, but may also work in a group environment to achieve organizational goals. This group of Technicians thrived in success by working as a team. We are currently in research and development but moving towards production environment.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
MFG Assembly Technician, Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. We are looking for talented technicians to help full-scale production of the Kuiper satellites.
The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.
Key job responsibilities
- Champion safety requirements in all designated zones and work locations
- Assemble and test with emphasis to detail, an assortment of avionic LRUs, electrical-mechanical assemblies, handle and install fiber-optics, and PCBAs
- Ensure lab equipment is maintained and calibrated
- Supports some preventative maintenance activities on test equipment and data acquisition systems
- Identify equipment requirements, process improvements, maintain floor stock inventory
- You will independently execute and prioritize work to meet company deliverables
- Execute test procedures for component and system level testing maintenance
- Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc)
- Your work may include contributing to improving SOPs and safety procedures
Additional Requirements:
- Willing to work all shifts (days, evenings, staggered shifts) overtime and weekends as needed. Estimated shift times 1st shift: 8am-4:30PM Shift will vary, depending on program needs
- Flexible working/commuting in between site locations
- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
- Able to lift-up to 25lbs. unassisted
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
The starting pay for this role in Washington State is up to $37/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.
A day in the life
We are a group of Technicians with well over 20+ years of diverse skills and experience. Each team member brings in willingness to train and positive team energy. Some tasks you may be an individual contributor, but may also work in a group environment to achieve organizational goals. This group of Technicians thrived in success by working as a team. We are currently in research and development but moving towards production environment.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.
Key job responsibilities
- Champion safety requirements in all designated zones and work locations
- Assemble and test with emphasis to detail, an assortment of avionic LRUs, electrical-mechanical assemblies, handle and install fiber-optics, and PCBAs
- Ensure lab equipment is maintained and calibrated
- Supports some preventative maintenance activities on test equipment and data acquisition systems
- Identify equipment requirements, process improvements, maintain floor stock inventory
- You will independently execute and prioritize work to meet company deliverables
- Execute test procedures for component and system level testing maintenance
- Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc)
- Your work may include contributing to improving SOPs and safety procedures
Additional Requirements:
- Willing to work all shifts (days, evenings, staggered shifts) overtime and weekends as needed. Estimated shift times 1st shift: 8am-4:30PM Shift will vary, depending on program needs
- Flexible working/commuting in between site locations
- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
- Able to lift-up to 25lbs. unassisted
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
The starting pay for this role in Washington State is up to $37/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.
A day in the life
We are a group of Technicians with well over 20+ years of diverse skills and experience. Each team member brings in willingness to train and positive team energy. Some tasks you may be an individual contributor, but may also work in a group environment to achieve organizational goals. This group of Technicians thrived in success by working as a team. We are currently in research and development but moving towards production environment.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
Manual Machinist - Water Jet, Project Kuiper
Amazon Kuiper Manufacturing
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
Key job responsibilities
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
The successful candidate will have experience in setting up and machining tight tolerance aerospace components. The desired candidate will have experience in a fast paced machining environment and will have the ability to respond quickly to interruptions and requests to support test teams.
About the team
The Kuiper machine shop provides development fabrication capabilities as well as future production machining. These operations occur in our Redmond facilities.
We are looking for candidates who thrive in a fast paced, start-up like environment. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.
Key job responsibilities
- Prepares and operates High Pressure Water Jet to process/produce high quality products.
- Responsible for operation, loading and unloading material and parts, proving programs, operating controls, setting offsets, deburring and inspection of quality parts for conformance to requirements.
- Make necessary adjustments to offsets and maintain part quality throughout the run.
- Detects equipment malfunctions or out of tolerance machining and adjusts machine, within capabilities, controls or control media as required to insure quality of productions. Reports all machine malfunctions to Management.
- Communicates with management, production control, quality and other shop personnel for assignments and to resolve machining or quality issues.
- Responsible for keeping equipment and work area clean and orderly and perform basic preventative maintenance functions on equipment.
- Intermediate knowledge of tool holders, cutting tools, boring bars, fixtures, inserts and other accessories used on various machines.
- Experience with a variety of materials (aluminum, stainless steels, titanium and nickel based alloys) a plus
- Capable of lifting/moving 30-50 lbs
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
The successful candidate will have experience in setting up and machining tight tolerance aerospace components. The desired candidate will have experience in a fast paced machining environment and will have the ability to respond quickly to interruptions and requests to support test teams.
About the team
The Kuiper machine shop provides development fabrication capabilities as well as future production machining. These operations occur in our Redmond facilities.
We are looking for candidates who thrive in a fast paced, start-up like environment. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.
Full-time
Quality Inspector, Project Kuiper
Amazon Kuiper Manufacturing
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. The Quality Team at Project Kuiper is looking for a Quality Inspector to join our team and help perform critical inspection duties within our Manufacturing Quality organization.
Key job responsibilities
The Quality Inspector will operate advanced metrology equipment to ensure product conformance for highly-complex aerospace grade hardware.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
This role will work daily to:
About the team
The Kuiper Manufacturing Quality team is driven to develop a Kuiper Quality System that is capable of scaling aerospace quality to volume and cost levels to meet end customer needs. This position will join the team at an exciting moment, with an opportunity to own quality system development and contribute to the design of requirements, processes, and systems used across the business. We value data driven decision making, a comfort with dealing in ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.
Key job responsibilities
The Quality Inspector will operate advanced metrology equipment to ensure product conformance for highly-complex aerospace grade hardware.
- Perform Receiving Inspection activity using sampling plans and metrology equipment, such as CMMs, Romer Arms, micrometers, calipers, height gages, calipers, micrometers, gages, etc..
- Report nonconformances when defective material is found.
- Develop and lead 5S activities around the Quality area(s) to ensure efficient working areas.
- Read Inspection Plans and Work Instructions to perform quality inspections
- Interpret engineering blueprints and drawings to the ASME Y14.5 standard to GD&T
- Perform Critical in-process and final inspections for assembled product.
- Complete First Article Inspection Reports (FAIRs) to the requirements of AS9102
- Develop Standard Operator Procedures (SOPs) for other inspectors to follow for day-to-day tasks.
- Train new inspectors on the correct usage of equipment and day to day responsibilities.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
This role will work daily to:
- Execute inspection plans for a wide variety of received hardware, utilizing a wide range of equipment.
- Perform and complete FAIs to AS9102 and present package to engineering for sign off.
- Inspect and buy off rework/repair activities
- Investigate hardware for defects, and create nonconformance reports for discrepant hardware
- Perform In-Process and Final inspections for assembly processes
About the team
The Kuiper Manufacturing Quality team is driven to develop a Kuiper Quality System that is capable of scaling aerospace quality to volume and cost levels to meet end customer needs. This position will join the team at an exciting moment, with an opportunity to own quality system development and contribute to the design of requirements, processes, and systems used across the business. We value data driven decision making, a comfort with dealing in ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.
Full-time