Mixed Signal/EE Design Engineer, Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
Come work at Amazon!
As a Mixed Signal/EE Design Engineer, you will engage with an experienced cross-disciplinary team to conceive and design innovative product solutions. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team to design and deliver hardware for the payload. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Key job responsibilities
As a Mixed Signal/EE Design Engineer, you will be a part of the team of experts working on the development of advanced electronic products. You will own or contribute to the following:
· Design digital and analog and/or RF circuits in collaboration with various teams
· Design and optimization of different blocks of electronics sub-systems.
· Perform schematic capture and lead PCB layout implementation.
· Work with software teams to determine requirements for FPGA and processor designs.
· Bring up Linux on embedded systems.
· Support flow-down requirement definitions and generate test plans/procedures
· Board bring-up and perform test campaigns of modules and subsystems
· Support design automated test systems, test fixtures and factory test
A day in the life
As a Mixed Signal/EE Design Engineer, you will work in a multi-disciplinary environment to design and deliver hardware for space. This requires the ability to work from concept to production. Candidates must be comfortable to work in the lab to debug and verify their designs.
About the team
The RF Hardware and Systems team is full of talented engineers who are the best of the best. They cover a wide range technical areas from power supplies, high speed digital, mixed signal, and RF. So members of this team need to be comfortable in multiple domains.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Come work at Amazon!
As a Mixed Signal/EE Design Engineer, you will engage with an experienced cross-disciplinary team to conceive and design innovative product solutions. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team to design and deliver hardware for the payload. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Key job responsibilities
As a Mixed Signal/EE Design Engineer, you will be a part of the team of experts working on the development of advanced electronic products. You will own or contribute to the following:
· Design digital and analog and/or RF circuits in collaboration with various teams
· Design and optimization of different blocks of electronics sub-systems.
· Perform schematic capture and lead PCB layout implementation.
· Work with software teams to determine requirements for FPGA and processor designs.
· Bring up Linux on embedded systems.
· Support flow-down requirement definitions and generate test plans/procedures
· Board bring-up and perform test campaigns of modules and subsystems
· Support design automated test systems, test fixtures and factory test
A day in the life
As a Mixed Signal/EE Design Engineer, you will work in a multi-disciplinary environment to design and deliver hardware for space. This requires the ability to work from concept to production. Candidates must be comfortable to work in the lab to debug and verify their designs.
About the team
The RF Hardware and Systems team is full of talented engineers who are the best of the best. They cover a wide range technical areas from power supplies, high speed digital, mixed signal, and RF. So members of this team need to be comfortable in multiple domains.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
Sr. Optical Manufacturing Engineer, Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
As a Manufacturing Engineer at Project Kuiper, you will be directly responsible for building, testing, qualifying and producing next generation spacecraft. You will utilize innovative solutions and cutting-edge technology to solve difficult manufacturing and engineering problems on a daily basis, at both a systems and specialized level. You will be a critical lynchpin between the production, development, tooling, supply chain and quality teams, and lead production on the assembly line as well as new production introduction. You will provide vital manufacturability input to the design engineering teams for both new and existing hardware. Finally, you will be responsible for standing up new processes, equipment, and assembly lines to support Kuiper’s aggressive build ramp, making data-driven decisions at each step in the process.
Key job responsibilities
- Use knowledge and experience in understanding, collaborating, and trading complex inputs from multiple other disciplines (Electrical, RF, Optics, Thermal, Dynamics, Mechanisms, Materials, Tooling, Assembly, and Test) to guide the team and arrive at a viable approach for an optical system.
- Material flow planning and manufacturing process definition build, inspection & test.
- Develop manufacturing processes for automated quality SPC.
- Specify and procure various assembly equipment and systems to meet program development requirements
- Interface with facilities personnel in site development and all utility requirements definition.
- AIT takt time & cost optimization planning
- DFM review and sign off for design release
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
This role will require a thorough understanding of precision manufacturing processes. You will own manufacturing processes for transitioning into a production environment. This is a hands-on role for a highly collaborative individual that combines superb technical and analytical capabilities to optimizing optic assembly procedures for production and meeting cross discipline requirements.
About the team
This is a fast-paced, intellectually challenging position, and you’ll work with leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your product’s performance, quality and cost. We want individuals who are ready for this challenge and want to reach beyond what is possible today.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
As a Manufacturing Engineer at Project Kuiper, you will be directly responsible for building, testing, qualifying and producing next generation spacecraft. You will utilize innovative solutions and cutting-edge technology to solve difficult manufacturing and engineering problems on a daily basis, at both a systems and specialized level. You will be a critical lynchpin between the production, development, tooling, supply chain and quality teams, and lead production on the assembly line as well as new production introduction. You will provide vital manufacturability input to the design engineering teams for both new and existing hardware. Finally, you will be responsible for standing up new processes, equipment, and assembly lines to support Kuiper’s aggressive build ramp, making data-driven decisions at each step in the process.
Key job responsibilities
- Use knowledge and experience in understanding, collaborating, and trading complex inputs from multiple other disciplines (Electrical, RF, Optics, Thermal, Dynamics, Mechanisms, Materials, Tooling, Assembly, and Test) to guide the team and arrive at a viable approach for an optical system.
- Material flow planning and manufacturing process definition build, inspection & test.
- Develop manufacturing processes for automated quality SPC.
- Specify and procure various assembly equipment and systems to meet program development requirements
- Interface with facilities personnel in site development and all utility requirements definition.
- AIT takt time & cost optimization planning
- DFM review and sign off for design release
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
This role will require a thorough understanding of precision manufacturing processes. You will own manufacturing processes for transitioning into a production environment. This is a hands-on role for a highly collaborative individual that combines superb technical and analytical capabilities to optimizing optic assembly procedures for production and meeting cross discipline requirements.
About the team
This is a fast-paced, intellectually challenging position, and you’ll work with leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your product’s performance, quality and cost. We want individuals who are ready for this challenge and want to reach beyond what is possible today.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
ASIC Design Verification Engineer
Amazon Kuiper Manufacturing Enterprises LLC
San Diego, CA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
The Role:
Be part of Project Kuiper’s sub-team responsible for defining and implementing the digital chip SOCs for communications via Low Earth Orbit satellites and Amazon gateways. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless system teams to define modems, high-speed interfaces, embedded processors, and DSP solutions in latest CMOS generation technologies.
In this role you will:
· Implement a state of the art verification environment to facilitate testing of the RTL against reference Matlab/C models
· Develop detailed test plans and write tests, run regressions, collect coverage matrices and report progress to the program
· Participate in the validation of FPGAs using test benches, which can be reused for the ASIC implementation
· Run formal verification of complex blocks to ensure functional correctness
· Work with the design and communication systems team and participate in system level verification using test benches constructed using UVM, System C and DPI-C
· Develop a highly automated environment to run regressions that can be used to make builds and maintain organization of the database
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
We are open to hiring candidates to work out of one of the following locations:
San Diego, CA, USA
The Role:
Be part of Project Kuiper’s sub-team responsible for defining and implementing the digital chip SOCs for communications via Low Earth Orbit satellites and Amazon gateways. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless system teams to define modems, high-speed interfaces, embedded processors, and DSP solutions in latest CMOS generation technologies.
In this role you will:
· Implement a state of the art verification environment to facilitate testing of the RTL against reference Matlab/C models
· Develop detailed test plans and write tests, run regressions, collect coverage matrices and report progress to the program
· Participate in the validation of FPGAs using test benches, which can be reused for the ASIC implementation
· Run formal verification of complex blocks to ensure functional correctness
· Work with the design and communication systems team and participate in system level verification using test benches constructed using UVM, System C and DPI-C
· Develop a highly automated environment to run regressions that can be used to make builds and maintain organization of the database
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
We are open to hiring candidates to work out of one of the following locations:
San Diego, CA, USA
Full-time
Sr. Electrical Engineer, Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
San Diego, CA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
As a Sr. Electrical Engineer, you will engage with a world class cross-disciplinary team to design innovative solutions. You will work closely with colleagues throughout Project Kuiper in order to drive key aspects of product definition, execution and optimization. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.
Key job responsibilities
• Decompose system level requirements into realizable hardware requirements. Design and develop a solution that meets these requirements.
• Design, develop, and optimize electrical hardware for use in space.
• Simulate and optimize EE circuits, perform schematic capture, and oversee layout.
• Build up test bench for design verification.
• Evaluate and optimize design in the lab to demonstrate design meets with system requirements.
• Work with RF system, power, software, mechanical thermal, reliability and compliance teams to ensure solution integrates with overall platform requirements.
Export Control Requirement
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
You will regularly interact with other engineers to realize microwave hardware designs that will fly in space. This requires the ability to work well with others in a highly cross-functional organization.
We are open to hiring candidates to work out of one of the following locations:
San Diego, CA, USA
As a Sr. Electrical Engineer, you will engage with a world class cross-disciplinary team to design innovative solutions. You will work closely with colleagues throughout Project Kuiper in order to drive key aspects of product definition, execution and optimization. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.
Key job responsibilities
• Decompose system level requirements into realizable hardware requirements. Design and develop a solution that meets these requirements.
• Design, develop, and optimize electrical hardware for use in space.
• Simulate and optimize EE circuits, perform schematic capture, and oversee layout.
• Build up test bench for design verification.
• Evaluate and optimize design in the lab to demonstrate design meets with system requirements.
• Work with RF system, power, software, mechanical thermal, reliability and compliance teams to ensure solution integrates with overall platform requirements.
Export Control Requirement
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
You will regularly interact with other engineers to realize microwave hardware designs that will fly in space. This requires the ability to work well with others in a highly cross-functional organization.
We are open to hiring candidates to work out of one of the following locations:
San Diego, CA, USA
Full-time
Senior Software Dev Engineer, Satellite Core Software
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband network connectivity to unserved and underserved communities around the world.
Key job responsibilities
* Lead the design and analysis of distributed software systems.
* Develop embedded software in C, C++, or other modern languages.
* Developing cloud native software systems in Java, Rust or C++.
* Utilize AWS and other services to build highly available and performant services.
* Be part of the 24x7 operational rotation to support satellite operations.
About the team
The Satellite Embedded Software Team owns the software that actually resides on the satellite’s flight computer, as well as many of the sensors and actuators which integrate with it. We are looking for an outstanding software engineer to participate in all phases of software development from requirements through implementation and test to operations.
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Key job responsibilities
* Lead the design and analysis of distributed software systems.
* Develop embedded software in C, C++, or other modern languages.
* Developing cloud native software systems in Java, Rust or C++.
* Utilize AWS and other services to build highly available and performant services.
* Be part of the 24x7 operational rotation to support satellite operations.
About the team
The Satellite Embedded Software Team owns the software that actually resides on the satellite’s flight computer, as well as many of the sensors and actuators which integrate with it. We are looking for an outstanding software engineer to participate in all phases of software development from requirements through implementation and test to operations.
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
Software Development Manager - Infrastructure, Kuiper Enterprise Technology, Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
Bellevue, WA
Have you ever wanted to be part of a team who is building industry changing technology? Amazon’s Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband network connectivity to unserved and underserved communities around the world.
In Project Kuiper Enterprise Technology, we build the software, services, and infrastructure that enable our program to design and engineer the future of LEO Satellite based broadband services. Our team succeeds when the entire Project Kuiper organization can scale as needed to be successful. This role will lead a team of Engineers responsible for designing and implementing infrastructure solutions for Kuiper.
Key job responsibilities
- Highly analytical and data-driven: You solve problems in ways that are backed up with data. You focus on driving processes, tools, and statistical methods which support rational decision-making.
- Technically fearless: You are not satisfied by performing 'as expected' and push the limits past conventional boundaries.
- Team obsessed: You find and cultivate talent to be capable of achieving outstanding results. You help develop the creative atmosphere to let engineers innovate, while holding them accountable for making smart decisions and delivering results.
- You are ambitious, yet humble. You recognize that there is always opportunity for improvement and use introspection and feedback from teammates and peers to raise the bar for your team.
- You are able to explore new problem spaces with unique constraints and thus non-obvious solutions; you are quick to identify any gaps in the team and the right person to fill them to best deliver value to customers.
- Own technical vision and direction: You identify and mitigate risks, construct project schedules, and prepare status reports; you embrace performance metrics and measurement techniques because they help you assess how well system-related services are running.
- Build and grow your team: You will be accountable for building an engineering team that delivers results. This means you will wear a lot of hats — from coaching individuals, to leading technical discussions, recruiting, establishing processes, and so on. You will be an example of Amazon's leadership principles and work to grow more leaders within your group.
- Collaborate on product direction: You will build and maintain strong relationships between engineering and partner disciplines (Mechanical Engineering, PLM, Embedded Software, Product, User Experience, QA) to ensure that we are focused on delivering the right product for customers.
- Lead beyond your team: You will be a key part of a small but growing community of engineering leaders who support their teams and contribute to the overall growth of our product development organization. You will share your best practices and technical acumen in order to drive technology decisions across our organization.
- Own your own shop: Our products will reach hundreds of millions of customers around the world. We run operations and the services your team delivers must meet high standards for operational excellence. Our teams own and operate the systems we build.
- Due to the need to access certain federal controlled information, you must be a U.S. citizen for consideration.
A day in the life
In initial expectations, this role will enable Kuiper’s Enterprise Applications, Design Tools and homegrown software services with best in class infrastructure solutions. Looking deeper, this is a unique opportunity for a highly motivated manager to build a team and organizational processes from the ground up. This role is inherently cross-functional and requires working closely with, Networking, IT, Mechanical Engineering, Enterprise Applications, product and program management, finance, legal and business development teams to bring products to guarantee best in class Satelite manufacturing and operation. Strategic vision in order to scale Kuiper's Infrastructure solution over time as well as tactical application to make sure all applications and services across the Kuiper landscape are functioning as expected. High attention to detail and intrinsic motivation required; as well as proven track record of launching successful teams in an ambiguous environment.
About the team
Here at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon’s culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious, and earn trust.
At Amazon, our mission is to be the most customer-centric company on Earth. To get there, we need exceptionally talented, bright and driven people. We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we’re building an environment that celebrates knowledge sharing and mentorship.
We are open to hiring candidates to work out of one of the following locations:
Bellevue, WA, USA
In Project Kuiper Enterprise Technology, we build the software, services, and infrastructure that enable our program to design and engineer the future of LEO Satellite based broadband services. Our team succeeds when the entire Project Kuiper organization can scale as needed to be successful. This role will lead a team of Engineers responsible for designing and implementing infrastructure solutions for Kuiper.
Key job responsibilities
- Highly analytical and data-driven: You solve problems in ways that are backed up with data. You focus on driving processes, tools, and statistical methods which support rational decision-making.
- Technically fearless: You are not satisfied by performing 'as expected' and push the limits past conventional boundaries.
- Team obsessed: You find and cultivate talent to be capable of achieving outstanding results. You help develop the creative atmosphere to let engineers innovate, while holding them accountable for making smart decisions and delivering results.
- You are ambitious, yet humble. You recognize that there is always opportunity for improvement and use introspection and feedback from teammates and peers to raise the bar for your team.
- You are able to explore new problem spaces with unique constraints and thus non-obvious solutions; you are quick to identify any gaps in the team and the right person to fill them to best deliver value to customers.
- Own technical vision and direction: You identify and mitigate risks, construct project schedules, and prepare status reports; you embrace performance metrics and measurement techniques because they help you assess how well system-related services are running.
- Build and grow your team: You will be accountable for building an engineering team that delivers results. This means you will wear a lot of hats — from coaching individuals, to leading technical discussions, recruiting, establishing processes, and so on. You will be an example of Amazon's leadership principles and work to grow more leaders within your group.
- Collaborate on product direction: You will build and maintain strong relationships between engineering and partner disciplines (Mechanical Engineering, PLM, Embedded Software, Product, User Experience, QA) to ensure that we are focused on delivering the right product for customers.
- Lead beyond your team: You will be a key part of a small but growing community of engineering leaders who support their teams and contribute to the overall growth of our product development organization. You will share your best practices and technical acumen in order to drive technology decisions across our organization.
- Own your own shop: Our products will reach hundreds of millions of customers around the world. We run operations and the services your team delivers must meet high standards for operational excellence. Our teams own and operate the systems we build.
- Due to the need to access certain federal controlled information, you must be a U.S. citizen for consideration.
A day in the life
In initial expectations, this role will enable Kuiper’s Enterprise Applications, Design Tools and homegrown software services with best in class infrastructure solutions. Looking deeper, this is a unique opportunity for a highly motivated manager to build a team and organizational processes from the ground up. This role is inherently cross-functional and requires working closely with, Networking, IT, Mechanical Engineering, Enterprise Applications, product and program management, finance, legal and business development teams to bring products to guarantee best in class Satelite manufacturing and operation. Strategic vision in order to scale Kuiper's Infrastructure solution over time as well as tactical application to make sure all applications and services across the Kuiper landscape are functioning as expected. High attention to detail and intrinsic motivation required; as well as proven track record of launching successful teams in an ambiguous environment.
About the team
Here at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon’s culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious, and earn trust.
At Amazon, our mission is to be the most customer-centric company on Earth. To get there, we need exceptionally talented, bright and driven people. We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we’re building an environment that celebrates knowledge sharing and mentorship.
We are open to hiring candidates to work out of one of the following locations:
Bellevue, WA, USA
Full-time
Sr. Optical Communications Engineer
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Come work at Amazon!
Innovation is part of our DNA! Our goal is to be Earth’s most customer centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in distributed systems and hardware design.
The Role:
You will be responsible for development of high bandwidth systems for free space optical communication between satellites. You will drive development of custom designs and lead characterization of commercial, off-the-shelf components to achieve a low-cost, light-weight, and reliable systems that meet the performance requirements. You will support network layer development team.
You will tackle challenging, novel situations every day and have the opportunity to work with multiple technical teams at Amazon in different locations. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun and make a positive impact on millions of people.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
About the team
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Innovation is part of our DNA! Our goal is to be Earth’s most customer centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in distributed systems and hardware design.
The Role:
You will be responsible for development of high bandwidth systems for free space optical communication between satellites. You will drive development of custom designs and lead characterization of commercial, off-the-shelf components to achieve a low-cost, light-weight, and reliable systems that meet the performance requirements. You will support network layer development team.
You will tackle challenging, novel situations every day and have the opportunity to work with multiple technical teams at Amazon in different locations. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun and make a positive impact on millions of people.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
About the team
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
MFG Assembly Technician, Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. We are looking for talented technicians to help full-scale production of the Kuiper satellites.
The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.
Key job responsibilities
- Champion safety requirements in all designated zones and work locations
- Assemble and test with emphasis to detail, an assortment of avionic LRUs, electrical-mechanical assemblies, handle and install fiber-optics, and PCBAs
- Ensure lab equipment is maintained and calibrated
- Supports some preventative maintenance activities on test equipment and data acquisition systems
- Identify equipment requirements, process improvements, maintain floor stock inventory
- You will independently execute and prioritize work to meet company deliverables
- Execute test procedures for component and system level testing maintenance
- Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc)
- Your work may include contributing to improving SOPs and safety procedures
Additional Requirements:
- Willing to work all shifts (days, evenings, staggered shifts) overtime and weekends as needed. Estimated shift times 1st shift: 8am-4:30PM Shift will vary, depending on program needs
- Flexible working/commuting in between site locations
- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
- Able to lift-up to 25lbs. unassisted
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
The starting pay for this role in Washington State is up to $37/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.
A day in the life
We are a group of Technicians with well over 20+ years of diverse skills and experience. Each team member brings in willingness to train and positive team energy. Some tasks you may be an individual contributor, but may also work in a group environment to achieve organizational goals. This group of Technicians thrived in success by working as a team. We are currently in research and development but moving towards production environment.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.
Key job responsibilities
- Champion safety requirements in all designated zones and work locations
- Assemble and test with emphasis to detail, an assortment of avionic LRUs, electrical-mechanical assemblies, handle and install fiber-optics, and PCBAs
- Ensure lab equipment is maintained and calibrated
- Supports some preventative maintenance activities on test equipment and data acquisition systems
- Identify equipment requirements, process improvements, maintain floor stock inventory
- You will independently execute and prioritize work to meet company deliverables
- Execute test procedures for component and system level testing maintenance
- Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc)
- Your work may include contributing to improving SOPs and safety procedures
Additional Requirements:
- Willing to work all shifts (days, evenings, staggered shifts) overtime and weekends as needed. Estimated shift times 1st shift: 8am-4:30PM Shift will vary, depending on program needs
- Flexible working/commuting in between site locations
- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
- Able to lift-up to 25lbs. unassisted
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
The starting pay for this role in Washington State is up to $37/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.
A day in the life
We are a group of Technicians with well over 20+ years of diverse skills and experience. Each team member brings in willingness to train and positive team energy. Some tasks you may be an individual contributor, but may also work in a group environment to achieve organizational goals. This group of Technicians thrived in success by working as a team. We are currently in research and development but moving towards production environment.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
Senior Logistics Program Manager-Air , Space Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Have you ever wanted to be part of a team who is building industry changing technology? Amazon’s Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband network connectivity to unserved and underserved communities around the world.
The ideal candidate has experience in global logistics, operations, with extensive experience in air transportation modes (freight and parcel), regulations, and considerations. This candidate has great business acumen and judgment, analytical abilities, written and verbal communication skills, and most importantly, a proven record of managing air product within logistics programs, demonstrating exceptional performance metrics for on time and accurate deliveries. They will have a bias toward data driven decision making, be comfortable with ambiguity and juggling multiple projects, be able to think big and creatively (while paying careful attention to detail), and enjoy working in a dynamic environment as we build to scale.
Key job responsibilities
- Intake projects and evaluate air product solutions to drive readiness initiatives
- Drive supplier engagement, service enablement and support operational plans
- Lead implementation, process improvement, securely manage freight and parcel logistics processes
- Own capacity planning tools and processes as required for air operations.
- Develop operational metrics to meet business requirements
- Determine key analytics and measures of success and provide data which assesses KPI/SLA adherence to contractual requirements
- Maintain operational visibility to all shipments in transit, escalate to carriers as needed, perform track/trace/claims management for any anomalies
- Review air transportation lanes to ensure strategies align with the expected workflow and recommend new transportation lanes as needed
- Provide supplier metrics, measure corrective actions, provide data for business reviews, maintain a metrics dashboard and ensure accurate milestone reporting
- Exhibit a constant passion for delivering an exceptional customer experience
- Influence supplier investments in continuous improvement to continually lower costs and risks
- Seek opportunities for network optimization through consolidation of freight, streamlining of processes, or creation of mechanisms
- Represent Kuiper Supply Chain on cross-functional initiatives.
- Ability to travel domestic/international up to 15% of the time
- Ability to work an alternative schedule or perform work during non-standard hours as business needs require
- Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
Here at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon’s culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious, and earn trust.
At Amazon, our mission is to be the most customer-centric company on Earth. To get there, we need exceptionally talented, bright and driven people. We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we’re building an environment that celebrates knowledge sharing and mentorship.
About the team
The Kuiper team is looking for a Senior Logistics Program Manager (Air) to support Kuiper global logistic air freight planning and operations, ensuring transportation activities are designed for our customers needs. In this role you will be interacting with both internal and external stakeholders in delivering hardware and commodities against time-bound objectives.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
The ideal candidate has experience in global logistics, operations, with extensive experience in air transportation modes (freight and parcel), regulations, and considerations. This candidate has great business acumen and judgment, analytical abilities, written and verbal communication skills, and most importantly, a proven record of managing air product within logistics programs, demonstrating exceptional performance metrics for on time and accurate deliveries. They will have a bias toward data driven decision making, be comfortable with ambiguity and juggling multiple projects, be able to think big and creatively (while paying careful attention to detail), and enjoy working in a dynamic environment as we build to scale.
Key job responsibilities
- Intake projects and evaluate air product solutions to drive readiness initiatives
- Drive supplier engagement, service enablement and support operational plans
- Lead implementation, process improvement, securely manage freight and parcel logistics processes
- Own capacity planning tools and processes as required for air operations.
- Develop operational metrics to meet business requirements
- Determine key analytics and measures of success and provide data which assesses KPI/SLA adherence to contractual requirements
- Maintain operational visibility to all shipments in transit, escalate to carriers as needed, perform track/trace/claims management for any anomalies
- Review air transportation lanes to ensure strategies align with the expected workflow and recommend new transportation lanes as needed
- Provide supplier metrics, measure corrective actions, provide data for business reviews, maintain a metrics dashboard and ensure accurate milestone reporting
- Exhibit a constant passion for delivering an exceptional customer experience
- Influence supplier investments in continuous improvement to continually lower costs and risks
- Seek opportunities for network optimization through consolidation of freight, streamlining of processes, or creation of mechanisms
- Represent Kuiper Supply Chain on cross-functional initiatives.
- Ability to travel domestic/international up to 15% of the time
- Ability to work an alternative schedule or perform work during non-standard hours as business needs require
- Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
Here at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon’s culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious, and earn trust.
At Amazon, our mission is to be the most customer-centric company on Earth. To get there, we need exceptionally talented, bright and driven people. We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we’re building an environment that celebrates knowledge sharing and mentorship.
About the team
The Kuiper team is looking for a Senior Logistics Program Manager (Air) to support Kuiper global logistic air freight planning and operations, ensuring transportation activities are designed for our customers needs. In this role you will be interacting with both internal and external stakeholders in delivering hardware and commodities against time-bound objectives.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
MFG Assembly Technician, Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. We are looking for talented technicians to help full-scale production of the Kuiper satellites.
The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.
Key job responsibilities
- Champion safety requirements in all designated zones and work locations
- Assemble and test with emphasis to detail, an assortment of avionic LRUs, electrical-mechanical assemblies, handle and install fiber-optics, and PCBAs
- Ensure lab equipment is maintained and calibrated
- Supports some preventative maintenance activities on test equipment and data acquisition systems
- Identify equipment requirements, process improvements, maintain floor stock inventory
- You will independently execute and prioritize work to meet company deliverables
- Execute test procedures for component and system level testing maintenance
- Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc)
- Your work may include contributing to improving SOPs and safety procedures
Additional Requirements:
- Willing to work all shifts (days, evenings, staggered shifts) overtime and weekends as needed. Estimated shift times 1st shift: 8am-4:30PM Shift will vary, depending on program needs
- Flexible working/commuting in between site locations
- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
- Able to lift-up to 25lbs. unassisted
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
The starting pay for this role in Washington State is up to $37/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.
A day in the life
We are a group of Technicians with well over 20+ years of diverse skills and experience. Each team member brings in willingness to train and positive team energy. Some tasks you may be an individual contributor, but may also work in a group environment to achieve organizational goals. This group of Technicians thrived in success by working as a team. We are currently in research and development but moving towards production environment.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.
Key job responsibilities
- Champion safety requirements in all designated zones and work locations
- Assemble and test with emphasis to detail, an assortment of avionic LRUs, electrical-mechanical assemblies, handle and install fiber-optics, and PCBAs
- Ensure lab equipment is maintained and calibrated
- Supports some preventative maintenance activities on test equipment and data acquisition systems
- Identify equipment requirements, process improvements, maintain floor stock inventory
- You will independently execute and prioritize work to meet company deliverables
- Execute test procedures for component and system level testing maintenance
- Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc)
- Your work may include contributing to improving SOPs and safety procedures
Additional Requirements:
- Willing to work all shifts (days, evenings, staggered shifts) overtime and weekends as needed. Estimated shift times 1st shift: 8am-4:30PM Shift will vary, depending on program needs
- Flexible working/commuting in between site locations
- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
- Able to lift-up to 25lbs. unassisted
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
The starting pay for this role in Washington State is up to $37/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.
A day in the life
We are a group of Technicians with well over 20+ years of diverse skills and experience. Each team member brings in willingness to train and positive team energy. Some tasks you may be an individual contributor, but may also work in a group environment to achieve organizational goals. This group of Technicians thrived in success by working as a team. We are currently in research and development but moving towards production environment.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
Sr. Mechanical Engineer - Electric Propulsion Development, Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and under-served communities around the world.
The Role:
Have you wanted an opportunity to develop electric propulsion systems for an advanced satellite constellation? The Sr. Mechanical Engineer: Electric Propulsion Development will lead a small team working with subsystem owners to support the mechanical design of spacecraft propulsion hardware. This person will also contribute to the mechanical design by identifying means to reduce cost, mass and volume to be traded with performance.
Key job responsibilities
- Coordinate task prioritization of a small team
- Perform CAD design work and drawing detailing
- Define propulsion-specific standards and ensure team compliance with organizational standards
- Support architecture determination and designing the propulsion system configuration
- Assist in prototype builds, prototype tests, part modifications and inspecting/testing prototype hardware
- Support investigations into material and functional non-conformances identified by the production team
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
About the team
The propulsion integrated product team comprises design, test, system and manufacturing sub-teams task -as a unit- with delivering propulsion capabilities to the Kuiper constellation.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
The Role:
Have you wanted an opportunity to develop electric propulsion systems for an advanced satellite constellation? The Sr. Mechanical Engineer: Electric Propulsion Development will lead a small team working with subsystem owners to support the mechanical design of spacecraft propulsion hardware. This person will also contribute to the mechanical design by identifying means to reduce cost, mass and volume to be traded with performance.
Key job responsibilities
- Coordinate task prioritization of a small team
- Perform CAD design work and drawing detailing
- Define propulsion-specific standards and ensure team compliance with organizational standards
- Support architecture determination and designing the propulsion system configuration
- Assist in prototype builds, prototype tests, part modifications and inspecting/testing prototype hardware
- Support investigations into material and functional non-conformances identified by the production team
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
About the team
The propulsion integrated product team comprises design, test, system and manufacturing sub-teams task -as a unit- with delivering propulsion capabilities to the Kuiper constellation.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
Sr. Modem Systems Engineer
Amazon Kuiper Manufacturing Enterprises LLC
San Diego, CA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
Come work at Amazon!
The Role:
Be part of the team defining the wireless modem of Project Kuiper’s broadband wireless system from customer end points to terrestrial gateways via Low Earth Orbit satellites. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless implementation teams to define a modem solution that optimizes spectrum efficiency, ability to support diverse set of customer link requirements / environments, minimizes BER / packet retries, and support for flexible MAC architecture.
In this role you will:
- Work within a team and take responsibility for high bandwidth wireless system architecture
- Create documentation defining modem block’s function, interfaces, and implementation requirements
- Drive trade-off analyst / simulation to benefit customer experience and optimization of resources (costs, power, spectrum)
- Work closely with implementation teams to verify the design, evaluate expected system level performance and provide quick feedback on potential improvements
Key job responsibilities
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
We are open to hiring candidates to work out of one of the following locations:
San Diego, CA, USA
Come work at Amazon!
The Role:
Be part of the team defining the wireless modem of Project Kuiper’s broadband wireless system from customer end points to terrestrial gateways via Low Earth Orbit satellites. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless implementation teams to define a modem solution that optimizes spectrum efficiency, ability to support diverse set of customer link requirements / environments, minimizes BER / packet retries, and support for flexible MAC architecture.
In this role you will:
- Work within a team and take responsibility for high bandwidth wireless system architecture
- Create documentation defining modem block’s function, interfaces, and implementation requirements
- Drive trade-off analyst / simulation to benefit customer experience and optimization of resources (costs, power, spectrum)
- Work closely with implementation teams to verify the design, evaluate expected system level performance and provide quick feedback on potential improvements
Key job responsibilities
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
We are open to hiring candidates to work out of one of the following locations:
San Diego, CA, USA
Full-time