Job Description

Mechanical Engineer III

Why join us?

We are hiring! We are looking for a Mechanical Engineer III to join our team. This position location is in Kirkland, WA, with the possibility of Hybrid or Remote work schedules within the US.

The Mechanical Engineer reports to our Chief Mechanical Engineer and is responsible for engineering design services in the energy and industrial processing sectors.

You will be an integral part of a team of multi-discipline engineers and designers working on upgrades to existing facilities and new projects.

The engineer may also support proposals and smaller projects.

How will you contribute to the team?

• Proactive in obtaining needed information and support to complete work on time.
• Flexible in balancing workload and priorities across multiple projects with a commitment to safety.
• Maintain and build strong professional relationships with colleagues and Clients.
• Ability to perform clear calculations with schematics, references, and assumptions.
• Ability to size equipment such as pumps, tanks, non-fired pressure vessels, compressors, boilers, heat exchangers.
• Calculate pipe sizes for compressible and incompressible flows.
• Basic knowledge of pipe materials, valves, relief valves and control valves.
• Coordinating questions to / from equipment suppliers and reviewing submittal documents.
• Potential occasional / infrequent travel to project site, other offices, or manufacturing plants

What will you contribute?

• B.S. Mechanical Engineering or similar degree from an ABET accredited college.
• Ten (10) years or more working as an engineer.
• PE license preferred.
• Strong work ethic, Eagerness to learn, Supportive team player and Good Verbal Communication.
• Experience creating flow diagrams and P&IDs.
• Experience writing equipment specifications.
• Knowledge of heat transfer, thermodynamics, and fluid flow.
• Familiarity with ASME B31.1 and ASME Section VIII.
• Familiarity with TEMA, HI, HEI, CTI, NFPA and other equipment codes and standards.
• Experienced with or desire to learn any or all : AFT Fathom; AFT Arrow; AutoCAD (P&ID); SmartPlant 3D.

Desired : experience with any of the following :

• Knowledge of water treatment and or wastewater treatment.
• Simple-cycle or Combined-cycle gas-fired power plant design experience.
• Knowledge of the following Renewable energy, Hydrogen gas, Pipe stress modeling software : Pipe flow; Caesar II and Thermal plant modeling : Theroflex; GT Pro; Steam Pro.
• Experience Working at a plant or jobsite.
• Knowledge of HVAC and Fire protection systems.

What we offer at SNC-Lavalin :

At SNC-Lavalin, you will enjoy competitive compensation, a safe and healthy work environment, and a full range of benefits :

• Opportunity to work on various projects of various sizes
• Competitive salary
• Motivational financial package & flexible benefits
• Group Insurance
• Retirement Savings Plan
• Employee Assistance Program (EAP)
• Learning and development programs, training, career opportunities

You think that a career in our team could match your profile, submit your application online now!

Founded in 1911, SNC-Lavalin is a global fully integrated professional services and project management company and a major player in the ownership of infrastructure.

From offices around the world, SNC-Lavalin's employees are proud to build what matters. Our teams provide comprehensive end-to-end project solutions including capital investment, consulting, design, engineering, construction, sustaining capital and operations and maintenance to clients in oil and gas, mining and metallurgy, infrastructure, and power.

On July 3, 2017, SNC-Lavalin acquired Atkins, one of the world's most respected design, engineering, and project management consultancies.

http : / / www.snclavalin.com.

Pay Range $85K - $110K annually

Note to staffing and direct hire agencies :

In the event a recruiter or agency who is not on our preferred supplier list submits a resume / candidate to anyone in the company, SNC-Lavalin Family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency.

https : / / careers.snclavalin.com / recruitment-agencies

Worker Type

Employee

Job Type

Regular

At SNC-Lavalin, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences.

SNC-Lavalin cares about your privacy. SNC-Lavalin and other subsidiary or affiliated companies of SNC-Lavalin (referred to throughout as SNC-Lavalin ) are committed to protecting your privacy.

Please consult our Privacy Notice on our Careers site to know more about how we collect, use and transfer your Personal Data.

By submitting your personal information to SNC-Lavalin, you confirm that you have read and accept our Privacy Notice.

Description

Are you a Mechanical Engineer (Robotics) looking to join one of the top companies in the Manufacturing Industry?

Are you looking to further your career and grow?

Do you have experience in the assembly and troubleshooting of electromechanical systems, Lab View, MATLAB, and Simulink?

If you answered yes to those three questions, then apply today!

Acara Solutions is seeking highly qualified candidates to work On-Site with our customer in Newton, MA. Interested?

Here's what you'd do :

• Design electromechanical test fixtures to assist test operations and assembly.
• Test new or existing products in the development cycle to characterize their performance.
• Develop and revise test protocols, test reports, assembly procedures, and work instructions.
• Assist in parts ordering, receiving, inspection, documentation, building, and integrating medical robots such as cable assemblies, motors, PCBs, and mechanical subsystems.
• Support the R&D group in the conceptualization and application of new technologies.
• Help build, troubleshoot, maintain, upgrade, and document electromechanical and robotic systems and test setups.

Here's what you'll get :

Pay : $45.00 / hr.

Hours : 40hr / week - 8 : 30 am to 5 : 30 pm, Monday through Friday

Length : Temporary (12 Months) with the potential to convert into a full-time employee.

Sound like a good fit?

APPLY TODAY

About Acara Solutions

Acara is a premier provider of recruiting and workforce solutions-we help companies compete for talent. With a legacy of experience in various industries around the world, we partner with clients, listen to their needs, and customize visionary talent solutions that drive desired business outcomes.

We leverage decades of experience to deliver contingent staffing, direct placement, executive search, and workforce services worldwide.

Job Requirements Required Skills / Qualifications :

• Bachelor's degree in mechanical engineering or Mechatronics
• Minimum of 4 years of experience in assembly and troubleshooting of electromechanical systems
• Minimum of 4 years of experience in Lab View, MATLAB, and Simulink.

Preferred Skills / Qualifications :

• Demonstrated CAD (Solid Works) proficiency.
• Inquisitive and detail-oriented
• Self-motivated, organized, able to multitask, and comfortable with aggressive deadlines.
• Proficient in using MS Office, in particular, Excel and Word

Job Description

Process Engineer

• We are looking for someone with 1-3yr experience
• Would consider and entry level engineer with strong co-ops / internship experience in the manufacturing / process engineering area .
• Local only, no relocation package is available

Responsible for developing and implementing process strategies, managing process resources, optimizing current processes, and maintaining process documents resulting in improving the efficiency and reducing the costs of production.

The Process Engineer reports to the Director of Operations.

Acquire tooling and all needed materials required to complete any given job.

Submit inspection samples to Quality Control for approval at all stages of manufacturing.

Acquire packaging materials to be used for the job.

Notify Lead if faulty material is noticed to stop the production run.

Manufacture parts according to provided specifications

Understand and operate all machinery associated with the production in a safe manner.

Adapt and adjust machinery according to the materials tolerances and specifications called out on the customer Purchase Order, drawing and / or quote.

Able to work with minimum supervision.

Keep clear and timely records of process improvement projects.

Must keep work area clean, neat and organized.

Must report to work on time and keep an acceptable record.

Perform other duties as assigned that may not be related to the daily routine

Overview

Draper is an independent, nonprofit research and development company headquartered in Cambridge, MA. The 1,800 employees of Draper tackle important national challenges with a promise of delivering successful and usable solutions.

From military defense and space exploration to biomedical engineering, lives often depend on the solutions we provide. Our multidisciplinary teams of engineers and scientists work in a collaborative environment that inspires the cross-fertilization of ideas necessary for true innovation.

For more information about Draper, visit.

Our work is very important to us, but so is our life outside of work. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities.

If this specific job opportunity and the chance to work at a nationally renowned R&D innovation company appeals to you, apply now .

Equal Employment Opportunity

Draper is committed to creating a diverse environment and is proud to be an affirmative action and equal opportunity employer.

We understand the value of diversity and its impact on a high-performance culture. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information.

Draper is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities.

To request reasonable accommodation, please contact

Responsibilities

Draper is seeking a mechanical engineer for a role focused on electronics packaging. Specific responsibilities include :

• Perform mechanical design and development associated with the physical arrangement of electronic circuits including assembly design, analysis, build, test, and documentation support
• Develop die-level packaging solutions including proposing solutions for placement and control of sensing components requiring precise alignment to be maintained through shock, vibration, and thermal disturbances
• Contribute to solving complex, customer-driven problems as part of a multi-disciplinary team, advance designs when requirements are unclear or incomplete, and adapt appropriately to changes in requirements
• Communicate effectively and openly with a multi-disciplinary program team members and program leadership, including non-technical personnel
• Define an approach to independently solve technical problems and execute assignments with minimal oversight while maintaining program schedule and budget
• Provide work instructions to support staff and guide junior staff
• Identify technical and schedule risks associated with a design decision and communicate them to project leadership
• Strong organization, planning and time management skills to achieve program goals

Qualifications

Qualifications :

Required Qualifications :

Bachelor of Science degree with 2+ years of experience in a relevant field such as mechanical engineering, materials science, or manufacturing engineering

Master of Science degree in a relevant field such as mechanical engineering, materials science, or manufacturing engineering

• Team player able to work in a fast-paced environment with demonstrated ability to handle multiple competing tasks and demands
• Experience designing in 3D CAD using SolidWorks and / or CREO

Preferred Qualifications :

• Experience with analysis tools such as ANSYS, COMSOL, and / or MatLab
• Familiarity with materials, fabrication, and assembly techniques associated with printed circuit assemblies including surface mount technology, high density substrates, rigid-flex designs, and integrated circuit assembly
• Familiarity designing / directing the physical layout of electrical circuits including SMD, interconnect definition, and integrated circuit assembly techniques
• Familiarity with machine shop tools and processes, prototyping, and vendor coordination

Security Clearance :

Applicants selected for this position will be required to obtain and maintain a U.S. Government security clearance.

LI-MM1

LI-hybrid

Options

Sorry the Share function is not working properly at this moment. Please refresh the page and try again later. Share on social media

Connect With Draper for Future Opportunities!

If you don't find the right posting in our Career Opportunities, you may for future consideration.

Job Description

Your main missions and responsibilities will be to :

At Technip Energies, we believe in a better tomorrow, and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition.

Designing and delivering added value energy solutions is what we do.

Technip Energies is seeking a mechanical engineer to join our Piping Engineering discipline in the Boston, MA office to work on exciting Energy Transition, Circular Economy and Petrochemical projects.

As a Piping Engineer, you will be responsible for the design and engineering of critical process piping systems from conceptual design through plant startup and providing technical services for operating facilities.

About The Role :

• Design piping systems and pressure vessels for various chemical processes in accordance with industry codes and standards.
• Optimize plant designs for new grassroots projects and major modifications to existing facilities ensuring compliance with all process design requirements, safety, operations and maintenance.
• Develop and maintain specifications for piping materials, piping components, valves, and specialty items
• Perform pressure design calculations including minimum wall thickness, branch reinforcement, bend / miter fittings pressure capacity, external pressure, hydrostatic test pressure, etc.
• Perform pipe stress analysis to ensure compliance with applicable codes
• Prepare piping and equipment layouts, piping isometrics and pipe support drawings
• Assist with the procurement of critical equipment / components and work closely with vendors through fabrication and installation.
• Occasional travel to field sites and provide technical support to the field during construction, pre-commissioning and startup
• Cross-train and support other mechanical engineering roles such as pressure vessels, heat exchangers, and rotating equipment

About You :

Catch this opportunity and invest on your skills development, should your profile meets these requirements.

• BS Mechanical Engineering or higher degree.
• 0-5 years of relevant engineering experience is preferred, candidates with more experience may be considered.
• Must possess and demonstrate strong analytical, critical thinking, and communication skills.
• Skilled in 2D and 3D design in AutoCAD, Solidworks, etc. Experience with plant modeling software such as Smart 3D, AutoCAD Plant 3D, or AVEVA E3D a strong plus.
• EIT / PE license or willingness to obtain.
• Familiar with applicable codes and standards, such as ASME BPVC, B31.1, B31.3, ASTM, API, MSS, and NACE.
• Experience with commercially available pipe stress software and FEA is a plus.

It is the policy of Technip Energies to provide equal opportunity for all qualified persons and not to discriminate against any applicant for employment because of race, color, religion, national origin, sex, sexual orientation, age, disability, veteran status, citizenship, or any other characteristics protected by federal, state or local law at the Technip Energies location to which this application is submitted.

In Addition, as a Federal Government contractor, Technip Energies is an affirmative action employer. If you require accommodation during the application process, please contact the local Human Resources Department.