Senior Mechanical Engineer

As a Senior Mechanical Engineer you will have the opportunity to lead design for mechanical engineering across a portfolio of ground-breaking projects in the US and globally.

Strong communication skills and teamwork are essential to life at Buro Happold and in turn, we can offer you unrivalled career, project, and development opportunities.

What would you be doing?

As a key part of the team, your responsibilities will be varied, but likely to include :

• Undertake detailed mechanical engineering design
• Act as the mechanical lead on a portfolio of projects
• Production of coordinated detailed design drawings, specifications, written reports, site observation reports, schedules etc.

on a variety of projects

• Work competently on an independent basis
• Ensure service and project work are carried out within agreed deadlines and within budget.
• Plan and manage REVIT documentation of design work
• Mentor and assist Graduate Engineers
• Prepare technical specifications, review and sign-off on calculations and prepare construction documents
• Work closely with clients, architects, other Buro Happold Engineers, and / or design team members as part of a dedicated and skilled team
• Communicate directly with Clients
• Manage workload of Project Discipline Engineers (including verification of quality)
• Take responsibility for concept and preliminary engineering solutions
• Carry out design reviews prior to the issue of technical documentation
• Monitor financial performance of projects
• Under guidance of senior staff, represent Buro Happold at meetings with the client, other professionals and suppliers.
• Set up and manage job / project administrative systems, including planning and monitoring job resourcing / expenditure (adjusting these as necessary)
• Keep senior staff informed of important and relevant service / design decisions and the objectives of the client are achieved
• Continually ensure practices, policies, strategy and services represent the client’s best interests and that Buro Happold policy is in keeping with current legislation and the relevant building codes for the relevant state etc

What are we looking for?

• years of experience in Mechanical Engineering and HVAC experience
• Ability to accept a high degree of responsibility in a team-based organization, combined with ability to work independently
• Broad Mechanical Engineering and Environmental design knowledge, from working on a wide range of US and international projects
• Ideally sector experience in Cultural projects, Labs, Commercial and Higher Education
• Experience using Revit, BIM, and Navisworks
• Experience using Excel, Word and PowerPoint, and Bluebeam
• Strong interpersonal and organizational skills
• Relevant bachelor or master degree
• PE preferred, but not necessary

In return

• Solve some of the most interesting challenges on world-class projects in collaboration with top architects
• Work within a truly multidisciplinary environment, capitalizing on Buro Happold’s extensive knowledge base in CFD, building physics, micro-climate analysis, climate change mitigation and energy master planning to inform truly environmentally responsive MEP designs
• Advance your career within a forward-thinking, global community of engineering professionals.
• Have a positive impact on the environment through your work locally, nationally, and internationally

What we offer :

• Salary range of $, to $,. This will be determined based on factors such as geographic location, skills, education, and / or experience
• Generous benefits package
• Annual discretionary bonus
• Generous PTO ( weeks) in addition to paid holidays
• k with company match
• Student Loan Repayment Assistance
• Hybrid working & summer hours
• Reimbursement for certain professional licenses and associated renewals and exam fees
• Global network of experts
• Learning and development opportunities
• Be a part of our Young Employees Forum and our Diversity and Inclusion Forum

Described by our clients as 'passionate', 'innovative', 'collaborative' : Buro Happold is an independent, international engineering practice that for over years has become synonymous with the delivery of creative, value led building and city solutions for an ever changing world.

Having worked on every continent, our clients include more than % of the world's leading architectural practices and we have collaborated with global organisations such as the United Nations, The World Bank and UNESCO.

Through our global community of driven, world leading engineering and consulting professionals we deliver elegant solutions for buildings and cities that seek to address the major problems facing societies today.

Follow us and find out more at .

Buro Happold value flexible working as an important part of the way we work. We welcome applications from those who are seeking flexibility in their careers.

LI-KS LI-Hybrid

Be you at Buro Happold

Buro Happold is proud to be a practice of a diverse range of professionals. We actively promote inclusivity to enable every individual to reach their full potential, the more inclusive we are the better our work will be.

We are working to change the lack of representation of minority groups in the built environment, and are particularly keen to hear from anyone who feels they are underrepresented in the industry.

We have much to learn from one another. Embracing difference allows us to develop the most innovative and elegant solutions.

Description

Cyient is hiring for an experienced Mechanical Engineer, ideally with experience in Automated People Mover (ADM) train systems.

You will design systems and products related to the ADMs, create design packages and provide technical expertise to design and production teams.

You may also have experience with Metro, Rail, Rolling Stock, Locomotive, Mechanical, People Movers, Monorail, Interiors, Exteriors.

You are also experienced with Catia V5, 3D-COM, VPM, PDM, or Teamcenter.

This position is an onsite opportunity in the Pittsburgh, PA area. All candidates must be able to report to an office daily (relocation assistance available)

Responsibilities and Accountabilities

• Develop a complete technical Scope of Work for rolling stock based on technical and system requirements.
• Perform 3D models, Bill of Materials and 2D deliverables in compliance with APM Pittsburgh standards.
• APM undercar equipment installation process and constraints
• Expertise Alstom tools and processes
• Designing products taking into account project requirements, performances and manufacturability, integration of mechanical and electrical assemblies and understanding the vehicle interior / exteriors requirements and translate into concept.
• Identify and select appropriate materials and surface finish of Vehicle Interiors / exterior parts, primarily with APM 300R Interiors
• Through understating of stack-up / individual tolerances and its effect on the assemblies.
• Conduct engineering studies and prepare or lead the preparation of specifications for both internal and external presentation.

Educational Requirements

Bachelors or Masters in Mechanical Engineering / Production Engineering / Aeronautical Engineering / Automotive Engineering

Experience (Essential Functions)

• 10+ years of experience in Mechanical Design Engineering, Minimum four years in APM Projects.
• Knowledge of metallic materials (physical properties and design), industrial processes (welding, bending, machining). Must be familiar with welding codes (ex. AWS D1.x & D8.x).
• Required work experience in Catia v5 (at least 4+ years).
• Preferred work experience in PDM / PLM (Enovia-DMA, 3DCom)
• Preferred experience on overhaul projects and reverse engineering.

Working Conditions (Industrial / Environmental)

Skills & Experience

Catia, Communication, ENOVIA - V6, Étude de conception, Étude du matériel, Qualité de conception

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law.

We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

Job Description

Would you like to get away from your desk and get your hands on some hardware, working on cutting-edge technical work in a way that you can see directly impacting the mission in a laboratory / test environment If you want to use your Mechanical Engineering knowledge to solve real world, first-of-a-kind problems and see your ideas come to life with design and acquisition cycles being on the order of weeks to months.

Also, if you want to contribute to solving real problems that are affecting the Navy and developing new technologies that will advance the program's mission, then the Design Engineering Unit in the Bettis Test Programs Department is looking for you! Apply today!

The Design Engineering Unit supports the Control Drive Mechanism Test Facility, the Large Component Test Facility, and Pump and Component Quiet Test Loop, which perform high pressure / high temperature testing, mechanism testing, pump testing, steam testing and more.

The successful candidate would perform fluid-mechanical system and hardware design, ASME code calculations, piping flow and flexibility analyses, equipment selection and procurement, as well as oversee testing systems within the Laboratories.

The candidate would work with a diverse team of engineers, scientists, technicians, project managers, and vendors to deliver unique, one-off tests that support the Naval Reactors program.

Required Combination of Knowledge and Skill

• BS degree in engineering or Bachelor's degree in a science related field from an accredited college or university and a minimum of four years of relevant experience or;
• MS degree in engineering or Master's degree in a science related field from an accredited college or university and a minimum of two years of relevant experience or;

Currently or previously NPE qualified or CTE / ACRS and one year of EOOW in the Nuclear Operations Program or Watch Instructor and Refueling Facility Area Refueling Engineer and one year as SRE

Preferred Skills

Hardware design experience is preferred, but not required. Procedure writing experience is also preferred.

About Optimus Technologies Optimus Technologies is a clean energy technology company based in Pittsburgh, PA. Optimus manufactures the Vector System, an advanced fuel system technology that enables diesel engines to operate on 100% biodiesel.

The Vector System is designed for medium and heavy-duty fleet applications, where emissions reductions are challenging or impossible to achieve in a cost-effective manner through other means.

The Vector System integrates into existing operations to facilitate a seamless transition to low-carbon fuels. Optimus’ Vector System is in use with leading municipal and private fleets throughout the country, enabling them to achieve near-zero carbon emissions while reducing their fuel and fleet operating costs.

Find out more at optimustec.com , on Twitter , Facebook , and Instagram . Job Description Optimus seeks an organized, detail oriented Mechanical Engineer III based in Pittsburgh, PA.

This is a full time (40-50 hours per week) salaried position ($86,000 - $95,000) with benefits. This position is ideal for candidates with extensive experience in heavy automotive engineering, control systems, and regulatory compliance.

There is a travel requirement of approximately 10-20% of work time in order to gain an intimate understanding of the practical application and long-term operation of the Vector System.

The position requires significant collaboration with other electrical & mechanical engineering team members, as well as working closely with our field operations and production teams.

Optimus is proud to be an equal opportunity employer. People of color, LGBTQ+ people, people with disabilities, veterans and members of other historically disenfranchised groups are strongly encouraged to apply;

Responsibilities Design and development of a variety of Vector System components through system implementation, manufacturing, and production.

Utilize OEM & internally developed data to incorporate into component design Support installation and ongoing upgrades / troubleshooting by traveling to clients’ locations for physical implementation Coordinate and exchange technical information with peers and pertinent third-party vendors Use of critical thinking to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems Develop test and production plans for new products and components Provide guidance to the less experienced team members Keep track of all your time in a tracking application Identify system inefficiencies and create plans to correct them Create work instructions for assembly and quality testing Participate and lead design review meetings and conference calls with manufacturers, subcontractors, and vendors Complete all project and design documentation for inclusion in installation manuals and product materials Read, interpret, and utilize appropriate technical drawings, schematics, electrical diagrams, and manuals to complete component design Qualifications & Experience Bachelor’s degree in mechanical engineering from an accredited university 5+ years of electro-mechanical engineering experience;

experience in an automotive product design and manufacturing Experience with advanced systems controls and associated software Experience with industry standards and test plan creation based on good engineering judgment Knowledge of regulatory compliance is a plus Aptitude for mechanical and electrical systems Ability to comprehend detailed product schematics and documentation Experience with drafting technical documents (please provide samples upon request) Proficient computer skills, especially with AutoDesk, Solidworks, and the ability to learn additional software programs as necessary Demonstrated strong written and verbal communication skills with the ability and willingness to work with other team members to solve problems Proven ability to work independently and under pressure with little to no supervision when necessary Detail-oriented with good organizational skills in prioritizing, scheduling, and time management Other Job Requirements A passion for alternative energy solutions Must possess a commitment to life-long learning Exposure to outdoor, warehouse, and shop working conditions Ability to work around a variety of particulates, lubricants & chemicals Adaptive to everchanging workload, conditions, and environments Valid driver’s license with acceptable driving record Domestic travel, as required (up to 20%) Flexible hours of operation Powered by JazzHR

Seeking an organized, detail oriented Mechanical Engineering Associate based in Pittsburgh, PA. This is a full time (35-50 hours per week) salaried position with benefits.

There is a travel requirement of approximately 50% of work time in order to gain an intimate understanding of practical applications and long-term operations.

The position requires significant collaboration with other electrical & mechanical engineering team members, as well as working closely with our hands on technicians and third-party mechanics to support customer implementation.

We are proud to be an equal opportunity employer. People of color, LGBTQ+ people, people with disabilities, veterans and members of other historically disenfranchised groups are strongly encouraged to apply;

we also consider qualified applicants regardless of criminal histories. If you are unsure about being qualified for this position after reading the responsibilities and requirements, please apply anyway! We are most excited to work with individuals who learn quickly and have a passion for clean energy solutions.

Responsibilities : Design and development of a variety of components through system implementation, manufacturing, and production.

Utilize OEM & internally developed data to incorporate into component design. Support installation and ongoing upgrades / troubleshooting by traveling to clients’ locations for physical implementation.

Coordinate and exchange technical information with peers and pertinent third-party vendors. Use of critical thinking to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.

Read, interpret, and utilize appropriate technical drawings, schematics, electrical diagrams, and manuals to complete component design.

• Qualifications & Experience : Bachelor’s degree in mechanical engineering from an accredited university 1-3 years of mechanical engineering experience;
• experience in an industrial product design and manufacturing company a plus. Aptitude for mechanical and electrical systems preferred;

heavy-duty diesel engine knowledge a plus. Ability to comprehend detailed product schematics and documentation. Proficient computer skills, especially with AutoDesk, AutoCad, Solidworks, and Inventor, and the ability to learn additional software programs as necessary.

Demonstrated strong written and verbal communication skills with the ability and willingness to work with other team members to solve problems.

Proven ability to work independently and under pressure with little to no supervision when necessary. Detail-oriented with good organizational skills in prioritizing, scheduling, and time management.

Other Job Requirements : A passion for alternative energy solutions. Must possess a commitment to life-long learning. Exposure to outdoor, warehouse, and shop working conditions.

Ability to work around a variety of particulates, lubricants & chemicals Adaptive to everchanging workload, conditions, and environments.

Valid driver’s license with acceptable driving record Domestic travel, as required (up to 50%). Flexible hours of operation.