Mechanical / Reliability Engineer

An International Chemical Company with 40 sites globally are looking for a Mechanical / Reliability Engineer.

Role Synopsis :

The Mechanical Engineer is primarily responsible for maximizing plant uptime by minimizing unplanned breakdowns using preventative / predictive maintenance.

This role plans and directs activities for maintenance and develops a long-termstrategy, establishes standards, and improves , maintains, and repairs facilities and equipment to ensure optimal reliability.

You must also work to ensure compliance with all applicable company rules as well as federal, state, and local regulations.

Led CI efforts that impact plant reliability.

Daily Duties :

• Define and manage the training needs for maintenance personnel.
• Establishes and refines the plant's long term maintenance strategy and improvement plan.
• Establishes maintenance and storeroom performance metrics to gauge the "current state"
• Tracks and publishes standardized maintenance performance metrics on a routine basis consistent with company requirements and aligns maintenance performance indicators with overall business key performance indicators.
• Manages the maintenance work planning function and the maintenance scheduling function. Develops and implements planning and scheduling standards and procedures for the plant.
• Works with plant production, engineering, and EHS personnel to ensure that MOC and mechanical integrity (MI) requirements which support PSM are complied with.

Reviews and approves all equipment and drawing modifications and changes associated with MOC.

• Manages the predictive maintenance (PDM) function and ensures that viable maintenance technologies that result in reduced plant downtime are implemented in the plant.
• Identifies new product and technology enhancements that could provide reliability improvement and cost reduction
• Manages the preventive maintenance (PM) program and works with production and engineering to develop and maintain current PM procedures and schedules that "add value" to the plant.
• Utilizes the "reliability centered maintenance" (RCM) methodology to ensure that the optimal maintenance practices are applied to each critical asset based upon its operating context.
• Assists in the maintenance budget development process annually and provides monthly spending analysis reports for plant personnel.
• Participates in the development of the plant's capital spending budget and site plan.
• Administers, plans, coordinates, and executes company adopted standard maintenance programs and practices.
• Manages the planning and execution of scheduled plant shutdowns / turnarounds.
• Manages all facilities maintenance including buildings, yards, and grounds. Also manages all contract services associated with facilities and plant maintenance.
• Works with planners, supervisors, and engineers to review equipment history files and assess plant equipment reliability.

Formulates action plans to address unreliable equipment.

• Manages and administers the plant's CMMS (Limble) and ensures that its use is optimized to control cost and boost reliability.
• Applies Root Cause Failure Analysis (RCFA) and Failure Modes and Effects Analysis (FMEA) techniques to help manufacturing areas address major reliability issues.
• Manages the plant's storeroom and works to minimize inventory value and operating cost while maximizing plant reliability.

As such, manages and approves the set-up of all new spare parts.

• Works with storeroom personnel to assess the storeroom's performance level and its impact on unplanned equipment breakdown.
• Ensures that acceptance standards for new, repaired, and rebuilt equipment are followed and that baseline conditions are established for such equipment.
• Reviews new equipment designs and installations to ensure "maintenance free" or "maintenance prevention" designs have been addressed.
• Provides technical support to the production department to resolve major sporadic or chronic equipment reliability problems.
• Serves as the plant's Total Productive Maintenance (TPM) resource and supports the implementation of TPM initiatives including autonomous operator maintenance.
• Participates in plant HAZOP analyses.

Reporting to :

The Engineering and Maintenance Manager

Experience :

• BSc in Chemical Engineering or Mechanical Engineering or other relevant degree
• 5 years' experience in Maintenance in a chemical, plastics, oil & gas, or similar facility
• Process Safety Management Knowledge
• Experience with CMMS systems for work order tracking, inventory management, and PM tracking
• Experience with reliability-based maintenance approaches and predictive maintenance technologies
• Works collaboratively and demonstrate effective listening skills

TEC Group International is acting as an Employment Agency in relation to this vacancy.

If you are applying via iPhone / iPad, please email your CV to [email protected]

• Apply Now

Description

Cyient is hiring for an experienced Mechanical Engineer, ideally with experience in Automated People Mover (ADM) train systems.

You will design systems and products related to the ADMs, create design packages and provide technical expertise to design and production teams.

You may also have experience with Metro, Rail, Rolling Stock, Locomotive, Mechanical, People Movers, Monorail, Interiors, Exteriors.

You are also experienced with Catia V5, 3D-COM, VPM, PDM, or Teamcenter.

This position is an onsite opportunity in the Pittsburgh, PA area. All candidates must be able to report to an office daily (relocation assistance available)

Responsibilities and Accountabilities

• Develop a complete technical Scope of Work for rolling stock based on technical and system requirements.
• Perform 3D models, Bill of Materials and 2D deliverables in compliance with APM Pittsburgh standards.
• APM undercar equipment installation process and constraints
• Expertise Alstom tools and processes
• Designing products taking into account project requirements, performances and manufacturability, integration of mechanical and electrical assemblies and understanding the vehicle interior / exteriors requirements and translate into concept.
• Identify and select appropriate materials and surface finish of Vehicle Interiors / exterior parts, primarily with APM 300R Interiors
• Through understating of stack-up / individual tolerances and its effect on the assemblies.
• Conduct engineering studies and prepare or lead the preparation of specifications for both internal and external presentation.

Educational Requirements

Bachelors or Masters in Mechanical Engineering / Production Engineering / Aeronautical Engineering / Automotive Engineering

Experience (Essential Functions)

• 10+ years of experience in Mechanical Design Engineering, Minimum four years in APM Projects.
• Knowledge of metallic materials (physical properties and design), industrial processes (welding, bending, machining). Must be familiar with welding codes (ex. AWS D1.x & D8.x).
• Required work experience in Catia v5 (at least 4+ years).
• Preferred work experience in PDM / PLM (Enovia-DMA, 3DCom)
• Preferred experience on overhaul projects and reverse engineering.

Working Conditions (Industrial / Environmental)

Skills & Experience

Catia, Communication, ENOVIA - V6, Étude de conception, Étude du matériel, Qualité de conception

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law.

We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

Job Description

Would you like to get away from your desk and get your hands on some hardware, working on cutting-edge technical work in a way that you can see directly impacting the mission in a laboratory / test environment If you want to use your Mechanical Engineering knowledge to solve real world, first-of-a-kind problems and see your ideas come to life with design and acquisition cycles being on the order of weeks to months.

Also, if you want to contribute to solving real problems that are affecting the Navy and developing new technologies that will advance the program's mission, then the Design Engineering Unit in the Bettis Test Programs Department is looking for you! Apply today!

The Design Engineering Unit supports the Control Drive Mechanism Test Facility, the Large Component Test Facility, and Pump and Component Quiet Test Loop, which perform high pressure / high temperature testing, mechanism testing, pump testing, steam testing and more.

The successful candidate would perform fluid-mechanical system and hardware design, ASME code calculations, piping flow and flexibility analyses, equipment selection and procurement, as well as oversee testing systems within the Laboratories.

The candidate would work with a diverse team of engineers, scientists, technicians, project managers, and vendors to deliver unique, one-off tests that support the Naval Reactors program.

Required Combination of Knowledge and Skill

• BS degree in engineering or Bachelor's degree in a science related field from an accredited college or university and a minimum of four years of relevant experience or;
• MS degree in engineering or Master's degree in a science related field from an accredited college or university and a minimum of two years of relevant experience or;

Currently or previously NPE qualified or CTE / ACRS and one year of EOOW in the Nuclear Operations Program or Watch Instructor and Refueling Facility Area Refueling Engineer and one year as SRE

Preferred Skills

Hardware design experience is preferred, but not required. Procedure writing experience is also preferred.

About Optimus Technologies Optimus Technologies is a clean energy technology company based in Pittsburgh, PA. Optimus manufactures the Vector System, an advanced fuel system technology that enables diesel engines to operate on 100% biodiesel.

The Vector System is designed for medium and heavy-duty fleet applications, where emissions reductions are challenging or impossible to achieve in a cost-effective manner through other means.

The Vector System integrates into existing operations to facilitate a seamless transition to low-carbon fuels. Optimus’ Vector System is in use with leading municipal and private fleets throughout the country, enabling them to achieve near-zero carbon emissions while reducing their fuel and fleet operating costs.

Find out more at optimustec.com , on Twitter , Facebook , and Instagram . Job Description Optimus seeks an organized, detail oriented Mechanical Engineer III based in Pittsburgh, PA.

This is a full time (40-50 hours per week) salaried position ($86,000 - $95,000) with benefits. This position is ideal for candidates with extensive experience in heavy automotive engineering, control systems, and regulatory compliance.

There is a travel requirement of approximately 10-20% of work time in order to gain an intimate understanding of the practical application and long-term operation of the Vector System.

The position requires significant collaboration with other electrical & mechanical engineering team members, as well as working closely with our field operations and production teams.

Optimus is proud to be an equal opportunity employer. People of color, LGBTQ+ people, people with disabilities, veterans and members of other historically disenfranchised groups are strongly encouraged to apply;

Responsibilities Design and development of a variety of Vector System components through system implementation, manufacturing, and production.

Utilize OEM & internally developed data to incorporate into component design Support installation and ongoing upgrades / troubleshooting by traveling to clients’ locations for physical implementation Coordinate and exchange technical information with peers and pertinent third-party vendors Use of critical thinking to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems Develop test and production plans for new products and components Provide guidance to the less experienced team members Keep track of all your time in a tracking application Identify system inefficiencies and create plans to correct them Create work instructions for assembly and quality testing Participate and lead design review meetings and conference calls with manufacturers, subcontractors, and vendors Complete all project and design documentation for inclusion in installation manuals and product materials Read, interpret, and utilize appropriate technical drawings, schematics, electrical diagrams, and manuals to complete component design Qualifications & Experience Bachelor’s degree in mechanical engineering from an accredited university 5+ years of electro-mechanical engineering experience;

experience in an automotive product design and manufacturing Experience with advanced systems controls and associated software Experience with industry standards and test plan creation based on good engineering judgment Knowledge of regulatory compliance is a plus Aptitude for mechanical and electrical systems Ability to comprehend detailed product schematics and documentation Experience with drafting technical documents (please provide samples upon request) Proficient computer skills, especially with AutoDesk, Solidworks, and the ability to learn additional software programs as necessary Demonstrated strong written and verbal communication skills with the ability and willingness to work with other team members to solve problems Proven ability to work independently and under pressure with little to no supervision when necessary Detail-oriented with good organizational skills in prioritizing, scheduling, and time management Other Job Requirements A passion for alternative energy solutions Must possess a commitment to life-long learning Exposure to outdoor, warehouse, and shop working conditions Ability to work around a variety of particulates, lubricants & chemicals Adaptive to everchanging workload, conditions, and environments Valid driver’s license with acceptable driving record Domestic travel, as required (up to 20%) Flexible hours of operation Powered by JazzHR

Seeking an organized, detail oriented Mechanical Engineering Associate based in Pittsburgh, PA. This is a full time (35-50 hours per week) salaried position with benefits.

There is a travel requirement of approximately 50% of work time in order to gain an intimate understanding of practical applications and long-term operations.

The position requires significant collaboration with other electrical & mechanical engineering team members, as well as working closely with our hands on technicians and third-party mechanics to support customer implementation.

We are proud to be an equal opportunity employer. People of color, LGBTQ+ people, people with disabilities, veterans and members of other historically disenfranchised groups are strongly encouraged to apply;

we also consider qualified applicants regardless of criminal histories. If you are unsure about being qualified for this position after reading the responsibilities and requirements, please apply anyway! We are most excited to work with individuals who learn quickly and have a passion for clean energy solutions.

Responsibilities : Design and development of a variety of components through system implementation, manufacturing, and production.

Utilize OEM & internally developed data to incorporate into component design. Support installation and ongoing upgrades / troubleshooting by traveling to clients’ locations for physical implementation.

Coordinate and exchange technical information with peers and pertinent third-party vendors. Use of critical thinking to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.

Read, interpret, and utilize appropriate technical drawings, schematics, electrical diagrams, and manuals to complete component design.

• Qualifications & Experience : Bachelor’s degree in mechanical engineering from an accredited university 1-3 years of mechanical engineering experience;
• experience in an industrial product design and manufacturing company a plus. Aptitude for mechanical and electrical systems preferred;

heavy-duty diesel engine knowledge a plus. Ability to comprehend detailed product schematics and documentation. Proficient computer skills, especially with AutoDesk, AutoCad, Solidworks, and Inventor, and the ability to learn additional software programs as necessary.

Demonstrated strong written and verbal communication skills with the ability and willingness to work with other team members to solve problems.

Proven ability to work independently and under pressure with little to no supervision when necessary. Detail-oriented with good organizational skills in prioritizing, scheduling, and time management.

Other Job Requirements : A passion for alternative energy solutions. Must possess a commitment to life-long learning. Exposure to outdoor, warehouse, and shop working conditions.

Ability to work around a variety of particulates, lubricants & chemicals Adaptive to everchanging workload, conditions, and environments.

Valid driver’s license with acceptable driving record Domestic travel, as required (up to 50%). Flexible hours of operation.