Mixed Signal/EE Design Engineer, Project Kuiper
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
Come work at Amazon!
As a Mixed Signal/EE Design Engineer, you will engage with an experienced cross-disciplinary team to conceive and design innovative product solutions. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team to design and deliver hardware for the payload. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Key job responsibilities
As a Mixed Signal/EE Design Engineer, you will be a part of the team of experts working on the development of advanced electronic products. You will own or contribute to the following:
· Design digital and analog and/or RF circuits in collaboration with various teams
· Design and optimization of different blocks of electronics sub-systems.
· Perform schematic capture and lead PCB layout implementation.
· Work with software teams to determine requirements for FPGA and processor designs.
· Bring up Linux on embedded systems.
· Support flow-down requirement definitions and generate test plans/procedures
· Board bring-up and perform test campaigns of modules and subsystems
· Support design automated test systems, test fixtures and factory test
A day in the life
As a Mixed Signal/EE Design Engineer, you will work in a multi-disciplinary environment to design and deliver hardware for space. This requires the ability to work from concept to production. Candidates must be comfortable to work in the lab to debug and verify their designs.
About the team
The RF Hardware and Systems team is full of talented engineers who are the best of the best. They cover a wide range technical areas from power supplies, high speed digital, mixed signal, and RF. So members of this team need to be comfortable in multiple domains.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Apply Now
Come work at Amazon!
As a Mixed Signal/EE Design Engineer, you will engage with an experienced cross-disciplinary team to conceive and design innovative product solutions. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team to design and deliver hardware for the payload. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Key job responsibilities
As a Mixed Signal/EE Design Engineer, you will be a part of the team of experts working on the development of advanced electronic products. You will own or contribute to the following:
· Design digital and analog and/or RF circuits in collaboration with various teams
· Design and optimization of different blocks of electronics sub-systems.
· Perform schematic capture and lead PCB layout implementation.
· Work with software teams to determine requirements for FPGA and processor designs.
· Bring up Linux on embedded systems.
· Support flow-down requirement definitions and generate test plans/procedures
· Board bring-up and perform test campaigns of modules and subsystems
· Support design automated test systems, test fixtures and factory test
A day in the life
As a Mixed Signal/EE Design Engineer, you will work in a multi-disciplinary environment to design and deliver hardware for space. This requires the ability to work from concept to production. Candidates must be comfortable to work in the lab to debug and verify their designs.
About the team
The RF Hardware and Systems team is full of talented engineers who are the best of the best. They cover a wide range technical areas from power supplies, high speed digital, mixed signal, and RF. So members of this team need to be comfortable in multiple domains.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Related Jobs
Mixed Signal/EE Design Engineer, Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
Come work at Amazon!
As a Mixed Signal/EE Design Engineer, you will engage with an experienced cross-disciplinary team to conceive and design innovative product solutions. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team to design and deliver hardware for the payload. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Key job responsibilities
As a Mixed Signal/EE Design Engineer, you will be a part of the team of experts working on the development of advanced electronic products. You will own or contribute to the following:
· Design digital and analog and/or RF circuits in collaboration with various teams
· Design and optimization of different blocks of electronics sub-systems.
· Perform schematic capture and lead PCB layout implementation.
· Work with software teams to determine requirements for FPGA and processor designs.
· Bring up Linux on embedded systems.
· Support flow-down requirement definitions and generate test plans/procedures
· Board bring-up and perform test campaigns of modules and subsystems
· Support design automated test systems, test fixtures and factory test
A day in the life
As a Mixed Signal/EE Design Engineer, you will work in a multi-disciplinary environment to design and deliver hardware for space. This requires the ability to work from concept to production. Candidates must be comfortable to work in the lab to debug and verify their designs.
About the team
The RF Hardware and Systems team is full of talented engineers who are the best of the best. They cover a wide range technical areas from power supplies, high speed digital, mixed signal, and RF. So members of this team need to be comfortable in multiple domains.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Come work at Amazon!
As a Mixed Signal/EE Design Engineer, you will engage with an experienced cross-disciplinary team to conceive and design innovative product solutions. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team to design and deliver hardware for the payload. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Key job responsibilities
As a Mixed Signal/EE Design Engineer, you will be a part of the team of experts working on the development of advanced electronic products. You will own or contribute to the following:
· Design digital and analog and/or RF circuits in collaboration with various teams
· Design and optimization of different blocks of electronics sub-systems.
· Perform schematic capture and lead PCB layout implementation.
· Work with software teams to determine requirements for FPGA and processor designs.
· Bring up Linux on embedded systems.
· Support flow-down requirement definitions and generate test plans/procedures
· Board bring-up and perform test campaigns of modules and subsystems
· Support design automated test systems, test fixtures and factory test
A day in the life
As a Mixed Signal/EE Design Engineer, you will work in a multi-disciplinary environment to design and deliver hardware for space. This requires the ability to work from concept to production. Candidates must be comfortable to work in the lab to debug and verify their designs.
About the team
The RF Hardware and Systems team is full of talented engineers who are the best of the best. They cover a wide range technical areas from power supplies, high speed digital, mixed signal, and RF. So members of this team need to be comfortable in multiple domains.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
Manufacturing Quality Engineer, Project Kuiper
Amazon Kuiper Manufacturing
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. The Quality Team at Project Kuiper is looking for an innovative Quality Engineer to join our team and deliver quality assurance objectives within our Vehicle Assembly & Test team.
Key job responsibilities
The Manufacturing Quality Engineer will serve to define quality requirements, develop and deploy quality plans, and verify production methods in order to deliver aerospace grade quality at unprecedented scale to support Project Kuiper's mission.
The Quality Engineer will be a subject matter expert in assembly and test methods for the integration of large electromechanical assemblies, and should have a background in aerospace hardware requirements for satellites.
A day in the life
About the team
The Kuiper Manufacturing Quality team is driven to develop a Kuiper Quality System that is capable of scaling aerospace quality to volume and cost levels to meet end customer needs. This position will join the team at an exciting moment, with an opportunity to own quality system development and contribute to the design of requirements, processes, and systems used across the business. We value data driven decision making, a comfort with dealing in ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.
Key job responsibilities
The Manufacturing Quality Engineer will serve to define quality requirements, develop and deploy quality plans, and verify production methods in order to deliver aerospace grade quality at unprecedented scale to support Project Kuiper's mission.
The Quality Engineer will be a subject matter expert in assembly and test methods for the integration of large electromechanical assemblies, and should have a background in aerospace hardware requirements for satellites.
- Develop and lead Kuiper Quality management activities, including process definition and validation for assembly and test methods, part and process qualification, receiving inspection plans, in-process inspection capabilities, and process monitoring capabilities.
- Lead MRB discussions determine product dispositions for nonconforming material.
- Lead the Development and Launch of multiple aspects of the Quality Management System across Project Kuiper.
- Dive Deep into root cause corrective action activities throughout the Project Kuiper Production System, particularly for assembly and test work cells.
- Work directly with Receiving Inspection, Supplier Quality, and Engineering teams to Develop and Qualify inspection, monitoring, and verification methods for the Kuiper Production System.
- Be a subject matter expert in Assembly & Test quality assurance for the Kuiper Production System.
- Perform audit activities to ensure compliance to QMS requirements.
- Develop and modify Process Flow Diagrams, PFMEAs, Control Plans, MSAs, and other APQP artifacts to support continued high quality production.
- Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
- Perform daily defect resolution as the Quality member.
- Investigates Production System issues to reduce defect rates and drive root cause corrective actions
- Implements the Kuiper Quality System through process development and launch mechanisms.
- Partners with cross-functional groups to develop and qualify internal production processes, including Quality Assurance processes
- Conduct rigorous Continuous Improvement activities to prevent recurrence of nonconformances during assembly.
About the team
The Kuiper Manufacturing Quality team is driven to develop a Kuiper Quality System that is capable of scaling aerospace quality to volume and cost levels to meet end customer needs. This position will join the team at an exciting moment, with an opportunity to own quality system development and contribute to the design of requirements, processes, and systems used across the business. We value data driven decision making, a comfort with dealing in ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.
Full-time
Sr. Optical Manufacturing Engineer, Project Kuiper
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
As a Manufacturing Engineer at Project Kuiper, you will be directly responsible for building, testing, qualifying and producing next generation spacecraft. You will utilize innovative solutions and cutting-edge technology to solve difficult manufacturing and engineering problems on a daily basis, at both a systems and specialized level. You will be a critical lynchpin between the production, development, tooling, supply chain and quality teams, and lead production on the assembly line as well as new production introduction. You will provide vital manufacturability input to the design engineering teams for both new and existing hardware. Finally, you will be responsible for standing up new processes, equipment, and assembly lines to support Kuiper’s aggressive build ramp, making data-driven decisions at each step in the process.
Key job responsibilities
- Use knowledge and experience in understanding, collaborating, and trading complex inputs from multiple other disciplines (Electrical, RF, Optics, Thermal, Dynamics, Mechanisms, Materials, Tooling, Assembly, and Test) to guide the team and arrive at a viable approach for an optical system.
- Material flow planning and manufacturing process definition build, inspection & test.
- Develop manufacturing processes for automated quality SPC.
- Specify and procure various assembly equipment and systems to meet program development requirements
- Interface with facilities personnel in site development and all utility requirements definition.
- AIT takt time & cost optimization planning
- DFM review and sign off for design release
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
This role will require a thorough understanding of precision manufacturing processes. You will own manufacturing processes for transitioning into a production environment. This is a hands-on role for a highly collaborative individual that combines superb technical and analytical capabilities to optimizing optic assembly procedures for production and meeting cross discipline requirements.
About the team
This is a fast-paced, intellectually challenging position, and you’ll work with leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your product’s performance, quality and cost. We want individuals who are ready for this challenge and want to reach beyond what is possible today.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
As a Manufacturing Engineer at Project Kuiper, you will be directly responsible for building, testing, qualifying and producing next generation spacecraft. You will utilize innovative solutions and cutting-edge technology to solve difficult manufacturing and engineering problems on a daily basis, at both a systems and specialized level. You will be a critical lynchpin between the production, development, tooling, supply chain and quality teams, and lead production on the assembly line as well as new production introduction. You will provide vital manufacturability input to the design engineering teams for both new and existing hardware. Finally, you will be responsible for standing up new processes, equipment, and assembly lines to support Kuiper’s aggressive build ramp, making data-driven decisions at each step in the process.
Key job responsibilities
- Use knowledge and experience in understanding, collaborating, and trading complex inputs from multiple other disciplines (Electrical, RF, Optics, Thermal, Dynamics, Mechanisms, Materials, Tooling, Assembly, and Test) to guide the team and arrive at a viable approach for an optical system.
- Material flow planning and manufacturing process definition build, inspection & test.
- Develop manufacturing processes for automated quality SPC.
- Specify and procure various assembly equipment and systems to meet program development requirements
- Interface with facilities personnel in site development and all utility requirements definition.
- AIT takt time & cost optimization planning
- DFM review and sign off for design release
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
This role will require a thorough understanding of precision manufacturing processes. You will own manufacturing processes for transitioning into a production environment. This is a hands-on role for a highly collaborative individual that combines superb technical and analytical capabilities to optimizing optic assembly procedures for production and meeting cross discipline requirements.
About the team
This is a fast-paced, intellectually challenging position, and you’ll work with leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your product’s performance, quality and cost. We want individuals who are ready for this challenge and want to reach beyond what is possible today.
We are open to hiring candidates to work out of one of the following locations:
Redmond, WA, USA
Full-time
Manufacturing Quality Engineer, Project Kuiper
Amazon Kuiper Manufacturing
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. The Quality Team at Project Kuiper is looking for an innovative Quality Engineer to join our team and deliver quality assurance objectives within our Vehicle Assembly & Test team.
Key job responsibilities
The Manufacturing Quality Engineer will serve to define quality requirements, develop and deploy quality plans, and verify production methods in order to deliver aerospace grade quality at unprecedented scale to support Project Kuiper's mission.
The Quality Engineer will be a subject matter expert in assembly and test methods for the integration of large electromechanical assemblies, and should have a background in aerospace hardware requirements for satellites.
A day in the life
About the team
The Kuiper Manufacturing Quality team is driven to develop a Kuiper Quality System that is capable of scaling aerospace quality to volume and cost levels to meet end customer needs. This position will join the team at an exciting moment, with an opportunity to own quality system development and contribute to the design of requirements, processes, and systems used across the business. We value data driven decision making, a comfort with dealing in ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.
Key job responsibilities
The Manufacturing Quality Engineer will serve to define quality requirements, develop and deploy quality plans, and verify production methods in order to deliver aerospace grade quality at unprecedented scale to support Project Kuiper's mission.
The Quality Engineer will be a subject matter expert in assembly and test methods for the integration of large electromechanical assemblies, and should have a background in aerospace hardware requirements for satellites.
- Develop and lead Kuiper Quality management activities, including process definition and validation for assembly and test methods, part and process qualification, receiving inspection plans, in-process inspection capabilities, and process monitoring capabilities.
- Lead MRB discussions determine product dispositions for nonconforming material.
- Lead the Development and Launch of multiple aspects of the Quality Management System across Project Kuiper.
- Dive Deep into root cause corrective action activities throughout the Project Kuiper Production System, particularly for assembly and test work cells.
- Work directly with Receiving Inspection, Supplier Quality, and Engineering teams to Develop and Qualify inspection, monitoring, and verification methods for the Kuiper Production System.
- Be a subject matter expert in Assembly & Test quality assurance for the Kuiper Production System.
- Perform audit activities to ensure compliance to QMS requirements.
- Develop and modify Process Flow Diagrams, PFMEAs, Control Plans, MSAs, and other APQP artifacts to support continued high quality production.
- Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
- Perform daily defect resolution as the Quality member.
- Investigates Production System issues to reduce defect rates and drive root cause corrective actions
- Implements the Kuiper Quality System through process development and launch mechanisms.
- Partners with cross-functional groups to develop and qualify internal production processes, including Quality Assurance processes
- Conduct rigorous Continuous Improvement activities to prevent recurrence of nonconformances during assembly.
About the team
The Kuiper Manufacturing Quality team is driven to develop a Kuiper Quality System that is capable of scaling aerospace quality to volume and cost levels to meet end customer needs. This position will join the team at an exciting moment, with an opportunity to own quality system development and contribute to the design of requirements, processes, and systems used across the business. We value data driven decision making, a comfort with dealing in ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.
Full-time
Payload Integration & Test RF Communications System Engineer, Project Kuiper
Amazon Kuiper Manufacturing
Redmond, WA
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
As a PIT RF Communications System Payload Integration and Test Engineer, you will engage with an experienced cross-disciplinary team to design and test innovative product solutions. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team and engage third party suppliers in order to drive key aspects of product definition, execution, and optimization. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.
As a member of the Payload Integration and Test team, you will be responsible for verification and validation of the entire wireless system composed of multiple wireless components. This includes testing, analyzing, and optimizing RF systems from baseband modems to RF transceivers to phased-array antennas.
Responsibilities
· Working within a project team and taking responsibility for a high bandwidth, low earth orbit communications satellite constellation.
· Deep-dives into component and subsystem designs to document expectations, evaluate tests, remedy test failures, and provide quick feedback to improve performance.
· Collaborating with diverse technical teams such as software, mechanical, modem, and compliance teams to validate expectations for system-level and network-level operations, from concept through execution.
· Integrating the end-to-end RF communications system. Meeting with customers internally and externally to select components.
· Defining test plans and procedures for lab and RF chamber testing, based on identified requirements for subsystems and for the overall system.
· Defining test plans and procedures for on-orbit payload verification or satellite testing, based on identified requirements.
· Analyzing and mitigating potential self-interference and other system interference issues.
· Implementing, validating, and optimizing RF lab set-ups composed of antenna, measurement equipment, and prototype equipment. Analyzing RF link budget / line-up for test set-ups and for the deployed system.
· Configuring test equipment for automated operation: satellite link emulator, spectrum analyzer, signal generator, etc.
· Meeting with suppliers to select enabling lab technologies.
· Interpreting test results, troubleshooting issues, performing root-cause analysis for any test failures.
· Documenting test results, test coverage, and other KPI metrics. Communicating status and issues effectively with developers and managers.
· Shepherding payload subsystems through test campaigns throughout the development lifecycle, from concept to implementation to integration.
Export Control Requirement
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
As a PIT RF Communications System Payload Integration and Test Engineer, you will engage with an experienced cross-disciplinary team to design and test innovative product solutions. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team and engage third party suppliers in order to drive key aspects of product definition, execution, and optimization. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.
As a member of the Payload Integration and Test team, you will be responsible for verification and validation of the entire wireless system composed of multiple wireless components. This includes testing, analyzing, and optimizing RF systems from baseband modems to RF transceivers to phased-array antennas.
Responsibilities
· Working within a project team and taking responsibility for a high bandwidth, low earth orbit communications satellite constellation.
· Deep-dives into component and subsystem designs to document expectations, evaluate tests, remedy test failures, and provide quick feedback to improve performance.
· Collaborating with diverse technical teams such as software, mechanical, modem, and compliance teams to validate expectations for system-level and network-level operations, from concept through execution.
· Integrating the end-to-end RF communications system. Meeting with customers internally and externally to select components.
· Defining test plans and procedures for lab and RF chamber testing, based on identified requirements for subsystems and for the overall system.
· Defining test plans and procedures for on-orbit payload verification or satellite testing, based on identified requirements.
· Analyzing and mitigating potential self-interference and other system interference issues.
· Implementing, validating, and optimizing RF lab set-ups composed of antenna, measurement equipment, and prototype equipment. Analyzing RF link budget / line-up for test set-ups and for the deployed system.
· Configuring test equipment for automated operation: satellite link emulator, spectrum analyzer, signal generator, etc.
· Meeting with suppliers to select enabling lab technologies.
· Interpreting test results, troubleshooting issues, performing root-cause analysis for any test failures.
· Documenting test results, test coverage, and other KPI metrics. Communicating status and issues effectively with developers and managers.
· Shepherding payload subsystems through test campaigns throughout the development lifecycle, from concept to implementation to integration.
Export Control Requirement
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Full-time