Job Description

Inspects and / or witnesses, approves or rejects the assembly, modification, repair and operational checkout of production or modified components, parts, and aircraft up to the point of fully completed aircraft prior to flight line operations.

Once the aircraft assumes flight operations status, this will require aFlight Operationsor Master Inspector. The Aircraft Assembly and Modification Inspector will verifyconformance to engineering prerelease or released drawings or sketches,heat treat, processing, finish to applicable standards and specifications.

• Inspects products for adherence to latest design or modification changes, customer of F.A.A. requirements and Company specifications exercising a knowledge of structures assembly, electrical systems, functional systems, accessories, power plant installation, instruments and interior furnishings;
• conducts complete area by area inspection during assembly and / or after completion or modification; inspects such operations as tool loading, framing, skinning, mating and assembly of structural components;
• inspects alignment of components,freedom of movement, clearances, tension and throw limits of entire functional systems and completed or modified products;
• witnesses continuity tests and inspects the assembly, installation and operational checkout of entire electrical systems, accessories and rigging of structural and functional components, such as wings to fuselage, power plants to structure, empennage to fuselage, landing gear, elevators, flaps, ailerons and stabilizers for attachments, alignment, workmanship, completeness and conformance to drawings and specifications;

inspects the sealing of structural and functional installation for completeness, workmanship, freedom from foreign material and sealability.

• Inspects, makes and / or witnesses continuity tests; inspects, approves or rejects electrical assemblies and components on benches or wire boards, such as instrument panels, control panels, wiring harnesses, junction and switch boxes;
• checks for proper hookup, routing, clearance, coding, location of electrical wiring and components and conformance to specifications;
• inspects the incorporation of design or modification changes on assemblies described herein; stamps or otherwise approves acceptable items;

rejects unacceptable items and prepares documentation for disposition of same; advises authorized personnel as required, of cause of malfunctioning.

Performs inspections during and / or following the completion of the manufacturing and modification / repair cycle.

May be required to inspect associated structural components in relation to normal job activities.

Inspects and approves continuity checks and pressure testing operations.

Inspects spot-welded parts and assemblies for workmanship, contour, cracks, faults, edge distance, and spots in radii.

Inspects spares material, parts and components, subassemblies for workmanship, completeness, modifications and / or deletions.

Submits periodic samplings of sealing compounds for laboratory testing and is responsible for ensuring the use of only those materials that have been certified as conforming to specifications.

Inspects the installation of rivets, bolts, screws and other types of fasteners for cracks, edge distance and conformance to specifications.

Inspects the application of all types of sealants. Inspects spot-welded parts and assemblies.

Inspects and approves major mockups of entire structure, hydraulic, plumbing, controls, rigging, electrical and other functional systems for conformance to applicable specifications.

Inspects and approves finishes, coatings and product appearance to meet engineering requirements

Must be willing to work any shift schedule to support projects.

Desired skills

Familiarity with discrepancy documentation.

Must be knowledgeable of Tool Control, and FOD.

Aerospace Manufacturing experience.

Competency in Microsoft office suite and basic computer skills.

Supervisor Assembly

Help the World Breathe Easier by Collaborating with Innovative Vyaire Employees Around the World

As a global leader in respiratory care, we know what we do enables, improves and extends lives. We are a young company with a long history of revolutionary products.

We devise extraordinary solutions that allow patients to lead ordinary lives. We believe the best way to create value for our customers, is to become invaluable.

We know a dynamic culture with diversity of thought makes this possible. Our colleagues are people who specialize in exceeding expectations, building lasting relationships and making it a priority to listen.

We are dedicated to anticipating what’s next and get it done. We thrive on contributing and making a difference.

To learn more, visit our website :

Watch our video : Impact You’ll Make in this Role

As a Supervisor Assembly, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world.

Here, you will make an impact by :

• Manage team of technicians and assemblers responsible for product build, support and repair
• Collaborate with customers, buyers / planners, customer service, production, and shipping teams to ensure product is built, repaired, refurbished, and shipped on time
• Track yield / PPH / working hours, prioritize actions, and track / report results on a daily / hourly basis
• Establish, post, and maintain training matrix
• Provide regular reporting of PPH, back order, back log, and build / service status
• Comply with applicable FDA and international regulatory laws / standards and the Vyaire Code of Conduct.
• Other duties as assigned or required

Your Skills and Expertise

To set you up for success in this role from day one, Vyaire is looking for candidates who must have the following qualifications :

High School Diploma required

1-5 years' supervisory experience in relevant Service and / or Operation Functions.

Additional qualifications that could help you succeed even further in this role include :

Bachelor’s Degree or higher is preferred

Experience of creating and implementing process and procedure documents (SWIs and SOPs)

Good verbal and written communication skills

Understanding and knowledge of respiratory care and / or ventilation principles desired

ERP systems knowledge

Lean training / six sigma background a plus

Microsoft Office proficiency (Excel is desired)

Travel : May include up to 10% domestic / international

Relocation Assistance : May be authorized

Benefit elections are among the most meaningful choices that we make for ourselves and our family. That is why Vyaire offers a comprehensive benefits package that includes various options to meet the diverse needs of our employees.

Vyaire offers a fixed and variable pay structure for our Assembler s . Base range in California for the Supervisor Assembly position is $64, to $96, .

Additional benefits offered include medical, dental, vision, paid leaves, life insurance, k, paid time off, paid holidays and potential for tuition reimbursement.

Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).

Coachella, CA, Corona, CA, Palm Desert, CA, Palm Springs, CA, Redlands, CA, Riverside, CA, San Diego, CA

Full time

Job Description

We are the makers of possible

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat.

It takes the imagination and passion of all of us from design and engineering to the manufacturing and marketing of our billions of MedTech products per year to look at the impossible and find transformative solutions that turn dreams into possibilities.

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self.

Become a maker of possible with us.

Duties and Responsibilities :

Responsible for assembling multiple product lines including integration of sub-assemblies into the instrument

Execute on multiple production orders and processes within allotted time standards

Provide overall device history record recording, reporting (serial numbers, tools)

Provide basic component testing (pre-assemblies, modules of simple instruments)

Provide assistance and training as required to other operators

Complete any related production activities in compliance with relevant regulatory requirements and in accordance with BD's expectations for Safety and Quality

Work or interface with Manufacturing Engineering, Quality, Planning and Purchasing as needed

Complete work activity in the accordance to BD's defined specifications, operating procedures, and company policies.

Must be able to perform standard material handling functions for instrument raw materials and sub-assemblies.

Maintain a safe, clean, and efficient work environment through execution of all housekeeping responsibilities including cleaning, sweeping, organizing to maintain a safe and clean work environment

Demonstrates the ability to follow established procedures according to Good Manufacturing Practices (GMP)

Must follow all BD housekeeping policies and procedures

Must follow all BD safety policies and procedures

Must be able to work overtime as required to meet BD business requirements

Performs other duties as required.

Minimum Requirements :

General education degree (GED) or High School Diploma required

Up to or more than12 months of work experience in a manufacturing environment is preferred

Work experience in chemical, pharmaceutical, or industry that complies with GMP is highly preferred.

Operating skills of manufacturing equipment, tools, and hand / fork lifts is preferred

Basic PC navigation such as the ability to enter data into programs / software applications as instructed and use software applications for mail, word processing, spreadsheets, and other job-specific needs is required.

Ability to communicate and effectively work as part of a team is required.

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19.

In some locations, testing for COVID-19 may be available and / or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work.

It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do.

We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive.

And find satisfaction in doing your part to make the world a better place.

As we continue to grow in our Camera Systems Group, Malin Space Science Systems is looking for another high-level Electronics Assembly Technician to work on Flight Hardware Systems under the direction of Production Manager or Production Management.

Job Duties

• Assemble electronic assemblies by following detailed procedures and utilizing solder assembly best practices.
• Creates and maintains detailed assembly records.
• Assists hardware engineers in assembly of prototype, flight electronics and cable harnesses, testing, troubleshooting, and integrating flight electronics with mechanical components.
• Performs other duties as required or requested which may become essential to this position.

Qualifications

• High-School Graduate / GED required. Some college or Trade School / ROP certification desired.
• Minimum of 3 to 5 years’ experience.
• Excellent hand soldering, harness wiring, cable building, documentation, organization, and communication skills.
• Excellent attention to details and ability to work closely with each member of a production team.
• Results-oriented, self-motivated and dependable.
• Must read schematics and mechanical drawings.
• J-STD-001 Certification is required. With Space Addendum is preferred. Will be required to become NASA certified assembler.
• Must be computer literate with knowledge of MS Excel and Word.

Physical Requirements

Ability to sit for a prolonged period of time. Manual dexterity as required for assembly. Good visual acuity, short and mid-range.

Walking, bending, reaching, and ability to lift and carry up to 25 lbs. Ability to meet stressful deadlines. High attention to details, good communication both written and oral.

Job ID : BDH20160912-37602

Orbital ATK is a major supplier of space of products that power and enable satellites of all classes. Products include spacecraft panels, bus structures, precision optical structures, deployable structural systems and mechanisms, solar arrays, antenna reflectors and propulsion tanks.

Our products are on virtually every U.S. satellite built in the last 20 years.

Orbital ATK is currently hiring a Composites Assembly Technician in our San Diego, CA location. Successful candidate will be responsible for the following :

Primary Responsibilities :

• Handling and managing fragile composite materials.
• Bond, prep and bonding of composite structures.
• Notate usage and out time controls on all adhesive materials used.
• Report data and interface with other employees and departments.
• Tooling preparation and release application.
• Utilize measurement tools such as calipers, rulers, and tape measures for fabricating hardware.
• Assist in maintaining overall shop appearance and cleanliness.

Skills / Experience :

• 8+ years experience with close-tolerance assembly work (e.g. electronics assembly, mechanical assembly, modeling)
• 8+ years experience in a composites / manufacturing environment (space / satellite structures, aerospace manufacturing environment preferred) and / or specialized education past HS such as an applicable certification or AA degree.
• Superior Mechanical Ability.
• Initiative, self starter, adaptable, and high motivation for excellence.
• Able to read, write and work to written instructions, blueprints, or shop drawings in English.
• Proficient use of basic shop arithmetic.
• Ability to multitask, prioritize.
• Experience or familiarity with ISO requirements, standards, and compliance issues.
• Standard computer literacy skills in Microsoft Office : Word and Excel.
• Strong attention to detail.
• Excels in a team environment.
• Ability to work under limited supervision.
• Ability to lift / push / pull up to 50 pounds.
• Ability to be on feet for up to 8+ hours each day.
• Ability to work Overtime and Weekends as needed.

Successful candidate will work 1st shift (5 : 00 am 1 : 30 pm)

NOTE : Position may be filled at one lower level with 1-2 years related experience and HS education and / or specialized education past HS such as an applicable certification or AA degree.

Orbital ATK has the people, strategy, agility, and products to thrive in a highly dynamic national security and space environment.

If you are a dynamic, successful, driven professional, Orbital ATK is the company that will further your experience and career growth.

We offer a highly competitive salary, comprehensive benefits including, medical, dental, 401k, tuition reimbursement, and much more.

As an Equal Opportunity Employer, we are committed to a diverse workforce.

Orbital ATK is applying entrepreneurial thinking and commercial practices to deliver reliable, innovative and affordable products and services to our customers and grow our core areas while harnessing new technologies that will take our products and your ideas into the future.

When encouraged to think beyond the ordinary, you’ll be amazed at what you can do!

We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Equal Opportunity Employer M / F / V / D

Are you a Veteran? Visit our Jobs for Veterans page to find jobs that match your military background.