Overview VTG is seeking an Assembler 2 to work at the local shipyards based in San Diego, California. What will you do? Reads blueprints, wiring diagrams, process sheets, and assembly and schematic drawings, and receives verbal instructions regarding work assignment.

Aligns and assembles parts such as leads, coils, wires, tabs, and terminals into housing. Routes and laces cables. Installs components and parts such as switches, coils, transformers, relays, transistors, and semiconductor circuits on chassis, circuit boards, panels, and other units.

Routes and attaches wires and connectors to form circuitry and connects assembly to power supply sources, switch panels, or junction boxes.

Attaches hardware and seals assembly. Examines parts for defects such as pinholes or chips. Test operates unit to locate defects, measure performance, determine need for adjustment, and verify specified operation.

Replaces defective components and wiring. Calibrates unit according to specifications. Enters information on production records, logs, and other report forms.

Assembles prototype microelectronic units. Repairs defective units rejected by inspection or test personnel. Do you have what it takes?

High School Diploma or GED and three (3) years of work related experience or Associates Degree in related field. Valid driver's license in required to drive a company owned or rental vehicles, preferred.

Ability to travel as required Active Secret clearance preferred; or must be able to obtain and maintain a secret level clearance.

Must be a US Citizen. Work hours are Monday through Friday, 6 : 00am - 2 : 30pm. Pay Range : VTG’s estimated starting pay range is $32,240 $65,040, which is a general guideline for the geographic location.

When extending an offer, VTG also considers work experience, education, skill level, market considerations and may possibly include contractual requirements which may cause an offer to fall outside of this range.

A Production Assembler I, in our Specials Department, job in Sacramento; CA is available at Milgard Windows and Doors. You must be able to perform tasks as assigned in the construction of windows and patio doors in all phases of assembly.

In addition to meeting departmental manufacturing goals, safety, accuracy, and efficiency are key elements to your performance.

The compensation range is $21.25 to $22.25, depending on experience.

Milgard Windows & Doors is the leading manufacturer of windows and doors in the Western United States with operations in Washington, Oregon, and California.

Milgard was recently acquired by MI Windows, which creates additional opportunities for growth and synergies between these two industry leaders.

Production Assembler I job responsibilities include :

• Support product build and assembly processes with accuracy and efficiency with the use of standard work instructions.
• Focus on the quality and timely delivery of completed tasks to achieve customer satisfaction.
• Demonstrate Milgard’s Core Values in all business interactions.
• Adhere to all facets of safety policies and procedures, including wearing required Personal Protective Equipment.
• One year of similar work experience (Assembly, Manufacturing, and / or Warehouse)
• Mechanical aptitude, including the ability to read a tape measure
• Experience with hand and power tools
• Compute basic math problems to include fractions, addition / subtraction
• Ability to lift 75 pounds unassisted

Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse / dependents.

We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life.

Our medical plans include a Health Reimbursement Account (HRA) or Health Savings Account (HSA) option to help you save for healthcare costs.

Below is a list of benefits you will enjoy while working with our company.

• Medical plans with HRA or HSA options
• Prescription
• Dental
• Vision
• Company Paid Life Insurance
• Voluntary Life Insurance
• Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance
• Company paid Short-Term Disability
• Company paid Long-Term Disability
• Paid time off (PTO), including Vacation, Personal, and 8 paid Holidays
• 401k retirement plan with company match
• Employee Assistance Program
• Teladoc
• Tuition Reimbursement
• Yearly Wellness Clinic

Milgard / MI Windows and Doors is experiencing strong growth, creating opportunities for our team members. This role is a great opportunity to learn about our business and show what you can do to build great products, processes, and people within an organization.

If you are interested in the Production Assembler I in Sacramento, CA, please apply now. We have built our success on our foundational philosophy of Respect, Service, and Excellence.

MI Windows & Doors is a great place to grow your career as we continue to build an even greater organization!

MITER Brands is an equal-opportunity employer. MI Windows and Doors does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

LI-MH1

MITERsac

This positions primary focus is the repair , fabrication and / or modification of electronic assemblies with direction from Supervision and work instructions.

Roles and Responsibilities :

Repair, fabrication and / or modification of electronic assemblies.

Assembly, Hand Soldering

Qualifications and Education Requirements :

Required Skill Sets : Ability to work in an industrial environment and able to lift up to 25 lbs. Unassisted. The majority of this work will be performed in a sitting position.

May occasionally perform duties in a standing position. May require minimal bending, lifting, squatting, kneeling, and climbing ladders and step stools.

Wear appropriate personal protective equipment as required Must have basic computer knowledge. Must be able to read and understand written process procedures in English, as well as, electromechanical blueprints and electronic schematics .

Record production and operational data on specified forms. Minimum 2 years of Production Hand Soldering experience .

High School Diploma / GED

Desired Skill Sets : J-STD-001D soldering certification Years of Experience Required (if any) : Requires a minimum of 2 years of experience in manufacturing or related environment.

Education Level Required : How will the contractor s success be measured? (Quantifiable measurements) : Subjective review of skills by immediate Supervisor, First Pass Yield of product, Attendance.

Culture (Will this contractor be working in a collaborative team environment or as an independent contributor?) : Collaborative team environment.

Pay Range :

The pay range for this position is $20.00-25.00 per hour; however, the pay offered may vary depending on job-related knowledge, skills, and experience.

This pay information is being provided pursuant to applicable law and is based in part on market location.

Please Note :

Must have a valid driver s license and current state required minimum vehicle insurance coverage to drive onto Client and Company property.

Benefits :

The benefits available with this position include :

• Ongoing Training (RSO, Systems, Software Programs, OSHA Safety, JJ Keller, etc.)
• Continuous Employment Development and Learning
• Ongoing Advocacy, internal assets with HSE, Legal and HR teams and experts to aid in Employee Career Path and Advancement
• 401K
• Aetna Group Medical Coverage & Kaiser for California only
• Dental Insurance Coverage
• Vision Insurance Coverage
• Basic Life Insurance & AD&D
• Long Term Disability
• Voluntary Short-Term Disability
• Direct Deposit
• Health Savings and Flexible Spending Accounts

Cenergy is a dynamic, diverse, woman-owned company that has provided stellar support to our clients globally for over 25 years! We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.

Leading electronics manufacturer of AC / DC units is seeking an Assembler to join their team.

Position Summary :

Ideally, we are looking for someone with assembly experience in electronics, specifically with PCB's and box builds.

You will be responsible to assemble a variety of electro / mechanical assemblies, sub-assemblies and rework.

To assemble a variety of electronic and mechanical assemblies, sub-assemblies and rework of Programmable Power and VTI products.

Responsibilities

• Under direct supervision uses engineering drawings and standard methods to determine correct sequences of assembly procedures and methodology.
• Use of small hand tools, fixtures and soldering wire and FET’s.
• Perform component level inspection and rework.
• Use microscope to inspect, identify faults, assembly errors, and damaged components.
• Operates simple machines, prep equipment.

Requirements

• Minimum of 1 year of previous experience in an electrical assembly environment Soldering skills Resistor color code, component recognition and basic math Read engineering drawings, OP sheets and BOMs
• Work from manuals, drawings, part lists, verbal and written instructions.
• ESD awareness.
• Strong attention to detail.
• Requires ability to stand for extended periods of time, walk, bend and regular lifting up to 25 lbs
• Good basic math skills and knowledge of basic computer skills
• Must have a flexible schedule to be able to work overtime as required, including weekends
• Must be able to communicate, in English effectively both in written and verbal form
• Must have COVID vaccination

Schedule :

Monday thru Friday 5 : 30 AM to 2 PM + Overtime able and willing to work overtime Monday thru Friday and weekends as necessary.

Compensation : $18-22 / hr DOE

$18-22 / hr DOE

Job Title : Assembler

Location :

San Diego, CA, US, 92121

Business Unit : Energy Conversion Solutions Posting Date : Jun 28, 2023 Job Description :

AMETEK Programmable Power designs, manufactures and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring & valuing differentiated power products and services.

Job Overview

The Assembler will prepare and perform routine electronic and mechanical assembly operations at unit and module assembly level using blueprints, work instructions, ECO’s, deviations, drawings, diagrams, and written processes.

In addition, the Assembler will assemble and inspect components, parts, subassemblies, and assemblies.

Assembler works on assignments that are semi-routine in nature but recognizes the need for occasional deviation from accepted practice and normally follows established procedures on routine work, requires instructions only on new assignments.

1st Shift : Monday thru Friday, 5 : 30 AM to 2 : 00 PM

Overtime : Ability to work overtime Monday thru Friday and on weekends occasionally.

Roles & Responsibilities

This position has responsibility for :

• Observes all safety regulations including personal protective equipment.
• Assemble components to a final configured product utilizing process instructions, engineering documentation (assembly drawings, wire lists, etc.

specialized tooling and fixtures, measuring equipment, and hand tools.

• Reads and interprets assembly drawings, parts lists, operations sheets and visual aids. Make recommendations for changes to improve build processes.
• Perform any rework from test failures in accordance with standard repair procedures. May also incorporate ECN's into completed boards.
• Prep and insert electronic components onto circuit boards, hand solder components onto circuit boards, touch up and rework circuit boards.
• Verify quality of product at the required intervals and verify accuracy of all work.
• May provide training and support to lower-level assemblers as required.
• Ability to operate material handling equipment, read and interpret engineering documentation, layout, and process worksheets, set-up and operate assigned machines and equipment.
• Meets established standards for productivity and quality.
• Follow the lead’s instruction on building units.

Competency Requirements

In order to perform the job successfully, an individual should demonstrate the following competencies :

• Attention to Detail
• Manual Dexterity
• Teamwork
• Interpersonal Skills

Minimum Qualifications (Experience and Skills)

• Typically requires a minimum of 1 - 3 years of related experience. Preferably electrical and / or electro-mechanical assembly.
• Must possess good to excellent assembly blueprint reading experience / skills.
• Must be able to use hand tools (i.e. torque wrench, drills and inspection tools).
• Ability to properly read a variety of measuring devices including rulers, tape measures, and scales.
• Must be able to communicate effectively with others.
• Basic computer skills.
• Performs other duties as assigned.

Education Requirements

High school diploma or equivalent

Preferred Requirements

• IPC-610 and J-STD 001 certification
• Efficient MS Word and Excel user

Work Environment

Production environment

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand;

walk; use hands to finger, handle or feel; and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

This position requires the ability to lift 25 pounds.

Minimum Salary : $35,927.00

Maximum Salary : $55,848.00

What’s in It for You

• Competitive compensation, holiday pay, and paid time off
• Great benefits package that includes health, vision, and dental insurance
• 401(k), plus matching
• Flexible spending accounts (FSAs), health savings account (HSA) with AMETEK contribution, life insurance, disability insurance, and family medical leave
• Employee referral program
• Tuition reimbursement program
• Employee assistance program
• Exciting, fast-paced environment where you could make a true impact
• Opportunities for career advancement within our business unit and across all other AMETEK business entities

This position is located in beautiful San Diego, California . Many consider San Diego to possess the best climate in the country.

Daytime temperatures average 70 degrees Fahrenheit year-round. Besides its amazing weather, San Diego is known for its miles of white-sand beaches, nightlife, outdoor culture, and ethnic diversity.

It is also known for being a great place to raise a family due to having some of the best public schools in the country.

The city offers plenty of family fun attractions, which include the world-famous San Diego Zoo, SeaWorld, and LEGOLAND. San Diego County comprises of 18 incorporated cities and numerous other charming neighborhoods, including downtown's historic Gaslamp Quarter, Little Italy, Coronado, La Jolla, Del Mar, Carlsbad, Escondido, La Mesa, Hillcrest, Barrio Logan and Chula Vista to name a few.

Compensation

Salary Minimum : $40,000 Salary Maximum : $60,000 Incentive : No

Disclaimer : Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location.

AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers’ most complex challenges.

We employ 18,500 colleagues, in 30 countries, that are grounded by our core values : Ethics and Integrity, Respect for the Individual, Diversity and Inclusion, Teamwork, and Social Responsibility.

AMETEK is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales of over $6.

0 billion. Traded publicly (NYSE : AME), we are a component of the S&P 500. Visit for more information.