Summary

SUMMARY OF POSITION

The welder performs repairs and maintenance to equipment parts, vehicles and roll-off containers. Paints repaired and / or new containers.

RESPONSIBILITIES

1. Performs repairs and maintenance on front and rear load, and roll-off containers. Cuts / welds repairs to vehicle floors, bodies, packing blades, rails, fabrication.

2. Welds steel and aluminum components using MIG gun and arc welding equipment.

3. Bends steel components using a break ad shear.

4. Cuts steel using a plasma cutter or torch.

5. Fabricates steel components on trucks and containers.

6. Installs lids and wheels on containers.

7. Paints repaired and / or new containers.

8. Sweeps up the container shop welding debris, grease, working environment, takes out the garbage and ensure that the shop is keep clean and safe on a daily basis.

9. Follows all safety policies and procedures.

10. Completes required paperwork.

11. Performs other job-related duties as assigned.

Essential Functions- The statements above are intended only to describe the general nature of the job and should not be construed as an all-inclusive list of position responsibilities.

Working Conditions

• Inside facility, outside environment exposed to weather and vibrations from trucks and maintenance facility. Occasional exposure to extreme weather conditions.

Who we are looking for :

We are currently looking for a Welder - Lead to be based out of Atlanta, GA. Reporting to Welding Supervisor, this person will be responsible for welding aluminum cable trays, as well as providing direction and guidance to other welders in the department.

The ideal candidate will have 3-years welding experience. Experience in lean manufacturing or business system-based company is desired.

What you’ll do :

Additional Responsibilities include, but are not limited to :

• Direct and provide guidance to other welders in the department
• Perform setup, adjustments and operation of welding machines within the department
• Ability to use basic fabricating tools (i.e. tape measure)
• Interpret drawings and fabricate based off blueprints
• Fabricate per customer requirements adhering to specifications
• Actively participate in Atkore’s safety program
• Cross train in different areas of the shop as required
• Ensure all processes are carried out with the required use of safety controls and PPE

Reasonable accommodations may be made to enable individuals with disabilities to perform

the essential functions.

What you’ll bring :

• 3+ years welding experience
• Ability to read a tape measure
• High School Diploma or GED equivalent (preferred)
• Ability to work Off Shift Monday-Friday
• Technical School Welding Certificate (preferred)
• Ability to squat, bend and lift up to 50 lbs.
• Ability to stand and work a 10-hour shift in a non-climate-controlled manufacturing

environment

• Must be willing to work overtime as needed
• All associates must embrace and foster an environment that supports our core values of

Integrity, Respect, Excellence, Teamwork and Accountability.

Working conditions are normal for a manufacturing environment. Work involves frequent lifting

of materials and product up to 50 pounds. The manufacturing plant is not climate controlled.

Machinery operation requires the use of safety equipment to include but not limited to; eye

safety glasses, hearing protectors, and safety work shoes. Loose fitting clothes and jewelry are

not permitted.

Within 3 months, you’ll :

• Understand how your job will help deliver Atkore’s strategy.
• Gain an understanding of your team.
• Gain an understanding of the training materials and procedures your team owns.

Who we are :

Atkore is a recipient of a Great Place to Work certification and a Top Workplaces USA award! We’re committed to creating an engaged and aligned workforce that drives collaborative culture.

Our team strives for breakthrough results, stays focused on being standout leaders, and fully supports decisions of the Company.

We consistently live the Atkore mission, strategic priorities, and behaviors, all in a way that’s consistent with our core values.

Together, we build strong leaders that continually endeavor to move us forward.

With a global network of manufacturing and distribution facilities worldwide, Atkore is a leading provider of electrical, safety and infrastructure solutions.

Join our team and align yourself with an industry leader!

We are currently looking to hire top field welders. Join our team and become a tankee traveling throughout our beautiful country! Compensation : Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging).

Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays.

Pay periods are weekly. Direct deposit is available. Benefits : Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period.

Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums.

Shift : Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status : Full-time employee (subject to project availability and work schedules.

NOTE : Compensation, benefits, and other position details are subject to Phillips Tank’s policies and procedures. Day to Day Duties : Performing arc and torch cutting and gouging.

Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and goat / tractor).

Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment.

Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment.

Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings.

Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training.

Follow directions and work professionally with other crew members. Other duties as assigned. Powered by JazzHR

POSITION SUMMARY

Following blue prints and drawings, fabricates parts and places in jigs for assembly and weld. May involve Mig, Tig, and Stick welding.

EXPERIENCE

• Welding of aluminum, carbon and stainless steel
• Cutting torch
• Blue prints and drawings
• Tape measure
• Specialty Vehicle Manufacturing Environment

SKILLS

• Read and follow blueprints and work orders
• Understand welding equipment, settings and technique
• Proficient in Mig, Tig, and Stick welding of aluminum, carbon, and stainless steel
• Cleaning and preparation of unit
• Tape measure accuracy
• Safe usage of basic use of hand tools

PHYSICAL REQUIREMENTS

• Lift up to 50 lbs occasionally
• Squatting / bending / kneeling
• Standing for long periods
• Walk and move about as required

SAFETY REQUIREMENTS

• Safety glasses with side shields
• Steel Toe or approved safety toe shoes
• Welding helmet, goggles or other protective eye equipment
• Gloves
• Welding jacket or protective sleeves as required
• Housekeeping
• Other Department / Job specific Personal Protective Equipment as required.

Education

• High school diploma / GED or equivalent experience

Posting Details

• Posted : May 22, 2023
• Full-Time

Locations

Showing 1 location 3303 Church St

Scottdale, GA 30079, USA

3303 Church St

Scottdale, GA 30079, USA

Job Details

Description

Who is Martin Sprocket & Gear?

Martin is a progressive leader in the Power Transmission and Bulk Material Handling Industry, classified as an essential business.

We are proud of our rich heritage dating back to our beginning in 1951 as a family-run organization. Fast forward to today, we have more than 30 locations in North America.

Why is it great to work for us?

As an employer of choice, we offer a stable work environment with equal leadership development and career growth opportunities.

We take great pride in our people and believe they are our greatest asset.

• Affordable Medical, Pharmacy, and Dental
• Life and Disability Insurance
• 401k Profit Trust Plan
• PTO (Paid Time Off)
• Growth Opportunities
• Competitive Pay
• Shift differential's
• 2nd Shift : 6% added to an hourly wage
• 3rd Shift : 8% added to an hourly wage

What will you do?

In this role, you will be involved in the welding of metal parts and operating industrial machine tools to complete customer orders in a conveyor shop.

Key Responsibilities :

• Weld metal parts using a MIG welding process
• Work from process sheets, blueprints, or other written / verbal instructions given by the supervisor to perform production tasks.
• Maneuver large, awkward, or heavy parts manually or with an overhead crane.
• Inspect welds throughout the process and use grinding tools when necessary.
• Maintain machine and work area in a clean and safe manner.
• Check and inspect operation against predetermined tolerances.
• Work in other areas or departments as assigned.
• Schedule : 1st Shift, Monday - Friday, 6 : 00 PM to 2 : 30 PM

Key Competencies :

• MIG welding experience (manual) in a manufacturing environment or equivalent schooling preferred
• Experience with grinding tools and machines preferred
• Simple oral communication skills; ability to read and comprehend instructions written in English and complete simple logs and reports in English
• Physically able to handle heavy items including lifting, pushing, pulling, and positioning components
• Work scheduled hours and comply with the company's attendance policy and all other company policies
• Consistently stand for an entire shift
• General mechanical knowledge a plus
• Work with others and be a team player
• Accuracy
• Reliability

To perform this job successfully, you must be able to report daily to the company's Scottdale, Georgia branch to perform each essential duty satisfactorily.

Reasonable accommodations may be made to enable qualified candidates with disabilities to perform the essential functions.

Qualifications

Skills

Behaviors

Preferred

Team Player : Works well as a member of a group

Detail Oriented : Capable of carrying out a given task with all details necessary to get the task done well

Motivations

Education

Required

High School or better.

Experience

Licenses & Certifications