Full-time

Responsible for the preparation, handling and supplying of materials. Sets up and performs welds of moderate complexity from blueprints and specifications

  • Load and unload equipment and materials
  • Responsible for the preparation, handling and supplying of materials
  • Sets up and performs welds of moderate complexity from blue prints and specifications
  • Assist engineering with prints and documentation design
  • Conducting daily activities according to documented quality system procedures and work instructions
  • Basic problem solving techniques and troubleshooting; as related to welding component parts
  • General cleanup and clearing of debris
  • Lifting up to 50 lbs and walking a minimum of 10 miles a day in various weather conditions
  • All other duties as assigned
  • Effectively work and build relationships with those of diverse backgrounds and organizational levels
  • Strong teamwork orientation
  • Knowledge of trade tools, equipment, materials, caliper, as well as, methods and techniques used in safe welding operations
  • Mechanical capacity and mathematical skills.
  • Positive attitude and professional customer service skills
  • Ability to interpret blueprints, shop drawings, sketches other production orders
  • Time management skills to meet schedules and time standards, to best of ability as instructed
  • Strong attention to quality, ability to work independently, and detail orientation
  • Active listening skills and effective communication including an openness to diverse input and feedback

EDUCATION AND EXPERIENCE REQUIREMENTS

Welding Certifications and / or technical training

Minimum 1 year of experience as a welder

ESSENTIAL PHYSICAL REQUIREMENTS

Demonstrate ability to work effectively with others and build relationships with those of diverse backgrounds and organizational levels

Possess basic understanding of construction hand tools

Positive professional attitude

Ability to interpret and communicate Mortenson policies

Ability to adapt to change

Punctual and dependable

This position description is not intended to be a comprehensive list of the duties and responsibilities of the position.

The duties and responsibilities of this position may change without notice.

Apply Now

Related Jobs

Welder welder

Mortenson Minneapolis, MN
APPLY

Responsible for the preparation, handling and supplying of materials. Sets up and performs welds of moderate complexity from blueprints and specifications

  • Load and unload equipment and materials
  • Responsible for the preparation, handling and supplying of materials
  • Sets up and performs welds of moderate complexity from blue prints and specifications
  • Assist engineering with prints and documentation design
  • Conducting daily activities according to documented quality system procedures and work instructions
  • Basic problem solving techniques and troubleshooting; as related to welding component parts
  • General cleanup and clearing of debris
  • Lifting up to 50 lbs and walking a minimum of 10 miles a day in various weather conditions
  • All other duties as assigned
  • Effectively work and build relationships with those of diverse backgrounds and organizational levels
  • Strong teamwork orientation
  • Knowledge of trade tools, equipment, materials, caliper, as well as, methods and techniques used in safe welding operations
  • Mechanical capacity and mathematical skills.
  • Positive attitude and professional customer service skills
  • Ability to interpret blueprints, shop drawings, sketches other production orders
  • Time management skills to meet schedules and time standards, to best of ability as instructed
  • Strong attention to quality, ability to work independently, and detail orientation
  • Active listening skills and effective communication including an openness to diverse input and feedback

EDUCATION AND EXPERIENCE REQUIREMENTS

Welding Certifications and / or technical training

Minimum 1 year of experience as a welder

ESSENTIAL PHYSICAL REQUIREMENTS

Demonstrate ability to work effectively with others and build relationships with those of diverse backgrounds and organizational levels

Possess basic understanding of construction hand tools

Positive professional attitude

Ability to interpret and communicate Mortenson policies

Ability to adapt to change

Punctual and dependable

This position description is not intended to be a comprehensive list of the duties and responsibilities of the position.

The duties and responsibilities of this position may change without notice.

Full-time
APPLY

Welder

Wastequip Minneapolis, MN
APPLY

Wastequip Steel Division has an immediate opportunity for a Welder to support our Rosemount, MN manufacturing operation.

The ideal candidate will be a MIG Welder with prior experience in a manufacturing environment.

Starting Pay - $25.01 / HR

Responsibilities

  • Positions parts in jigs or fixtures on bench or floor, or clamps parts together along layout marks
  • Lays out, positions, and tack welds work pieces
  • Welds along vertical, horizontal, and overhead weld lines
  • Connects regulator valves to oxygen and fuel gas cylinders for cutting torch. Turns regulator valves to activate flow of gases, lights torch, and adjusts gas mixture and pressure to obtain desired flame.

Holds & guides torch at proper angle to cut metal

  • Examines weld for bead size and other specifications
  • Scarfs or grooves welds and parts
  • Chips or grinds off excess weld, slag, or splatter
  • Other duties as assigned
  • Employee must regularly stand, walk, reach, stoop, lift, climb or balance, kneel, crouch, or crawl

Specific vision abilities required include distance vision, close vision, peripheral vision, & depth perception

Qualifications

  • High school diploma or GED
  • One to six months of related experience and / or training preferred
  • Ability to read and comprehend simple instructions, short correspondence, and memos
  • Knowledge of basic math, tape measure reading, fractions & decimals
  • Ability to understands and carry out detailed but uninvolved written or oral instructions
  • Ability to read blue prints and measuring tape
  • Experienced in a fast paced production environment preferred
  • Able to pass all EHS required tests and clearances

About Wastequip

Headquartered in Charlotte, N.C. with manufacturing and service facilities throughout North America, Wastequip is the leading North American manufacturer of waste handling equipment.

Wastequip is the only manufacturer to offer a full line of steel and plastic products to collect, handle and transport just about any type of waste and recyclables.

Skills

Full-time
APPLY

Sr. Production Welder

Trane Technologies Minneapolis, MN
APPLY

Job Summary : Looking for an experienced Sr. Production Welder for setting up and running low volume production work. Must be a team member putting forth safety and quality foremost in daily assignments.

This is a full-time position working st shift which is : a.m. to : p.m. Monday Friday. If mandatory overtime time exists, you would come in one hour prior to your shift during the week and need to work some Saturdays.

General Overview of Position

The position of Senior Welder reports to the area Supervisor. Responsible for welding a variety of component parts and assemblies.

Maintain production and quality standards under minimal supervision. This role will be the resident expert for welding, at times working with engineering to answer questions.

Position Responsibilities

  • Weld a variety of component parts and assemblies
  • Comfortable using the following equipment & tools, welders, inspection tools, jigs, fixtures, pallet jacks and hoists.
  • At times, work with engineering to answer welding questions
  • Use time clock as required to record time.
  • Order consumable parts using order system.
  • Work in a safe and clean manner using S principles.
  • Stage welded parts and assemblies in a neat and orderly fashion.
  • Complete required information for the data collection of yields and efficiencies.
  • Using Oracle software to complete WIP jobs
  • Package parts as required
  • Redline process and procedures as required.
  • Perform routine preventive maintenance to equipment.
  • Other duties and / or tasks may be assigned on an as needed basis.

Position Requirements

  • Ability to read and interpret welding drawings
  • Check own work for accuracy
  • Ability to MIG and TIG weld
  • Ability to weld steel, aluminum, and stainless steel
  • Welding of parts or components to make top level assemblies. Work from prints or other specifications, adjusting, fitting, and aligning to meet print tolerances
  • Occasionally make jigs and fixtures
  • Excellent communication skills.
  • Weld per shop instructions and drawings
  • Ability to work independently or with team.
  • Ability to reach and maintain prescribed productivity levels for WIP jobs.
  • High school diploma or GED and - years welding experience. Technical degree / certificate is a preferred

Essential Job Functions

  • Ability to repeatedly lift and carry up to lbs.
  • Ability to stand and walk for long periods of time and periodically climb up and down ladders.
  • Frequently bending, kneeling and reaching.
  • Ability to use hands and fingers to disassemble small parts
  • Ability to effectively communicate in English, both written and oral.

Compensation $ . per hour

We offer competitive compensation and comprehensive benefits and programs that help our employees thrive in both their professional and personal lives.

We are proud of our winning culture which is inclusive and respectful at its core. We share passion for serving customers, caring for others, and boldly challenging what’s possible for a sustainable world.

Full-time
APPLY

Welder (Mig/Arc) - Minneapolis

Master Halco Minneapolis, MN
APPLY

Overview

This is your opportunity to join the Fence industry leader!

Master Halco , one of the nation's largest wholesale distributors of fencing products is seeking a Welder to work at our branch.

The Welder's responsibilities include :

  • Prepare, cut pipe sections using table or jig saw, then setup lay-up sections
  • Weld pipe using MIG / ARC welding equipment and techniques.
  • Complete projects using manufacturing work orders and / or verbal instructions
  • Locate materials to complete project

This is a very exciting time to join our company. We are continuing to grow (70 locations), introducing new products, making technological investments, and implementing innovative marketing strategies.

We are also focused on our people our most important resource. At Master Halco, we believe in transparency, open communication, and rewarding success with a path to fully develop your potential while building a career.

If you enjoy a fast-paced work environment and the opportunity to show us your best customer service skills, this is the right place for you!

Working With Us Has Its Rewards :

  • Competitive hourly wage
  • Eligible for a wage progression plan with pay increases of 50 Cents every 6 months over a 3 year period.
  • Monday through Friday schedule, day shift
  • A competitive health care plan typically effective after 31st day of employment
  • A generous matching 401(k) plan
  • Tuition reimbursement up to $10K per academic year
  • Bonus Opportunities
  • A generous paid-time off package, and more

Master Halco offers advancement opportunities at every level. We are always looking for people with the drive to learn and determination to succeed.

Responsibilities

  • Uses verbal or written instruction from work orders and collects materials for processing
  • Cuts pipe using pipe cutting equipment
  • Lays out pipe sections on a jig or table and welds with MIG / ARC welding equipment and techniques, applies cold galvanizing solution to protect welds
  • Performs visual inspection on completed work ensuring quality
  • Maintains a clean and safe work area
  • Performs other warehouse and gate fabrication duties as required

Qualifications

  • 2-3 years welding experience with MIG, ARC
  • Experience working with hand tools
  • Able to lift / move heavy materials (up to 75lbs)
  • Ability to read, write and perform basic math functions
  • Ability to perform own layouts using jigs
  • Ability to work around heat and chemicals
  • Must be able to work overtime as needed
Full-time
APPLY

Welder - Fabricator

Twin City Staffing Minneapolis, MN
APPLY

Loading... Are you an experienced welder looking for a new opportunity to showcase your skills? Twin City Staffing is currently seeking a welder / fabricator to join our team.

In this role, you will work on containers, trucks, and assist mechanics in our shop. If you have a passion for welding and fabrication and enjoy working in a fast-paced environment, we want to hear from you.

Location : Minneapolis, MN Wage : $20 - $22 / hr. Hours : 6 am - 2 : 30 pm, Monday - Friday Benefits of the w elder / f abricator :

  • Health, Vision, and Dental insurance
  • Life insurance and Critical Illness coverage

k) with company match

  • Paid time off and paid holidays
  • Room for advancement within the company

Duties of the w elder / f abricator :

  • Complete welding repairs on metal containers, including replacing damaged walls, rusted floors, and other broken or cracked metal structures.
  • Assist with container preparation for welding and painting.
  • Provide assistance to lead fabricators / mechanics when needed.
  • Perform torch burning and plasma cutting tasks.
  • Operate forklifts for material handling.
  • TIG and MIG welding and fabricating

Qualifications welder / fabricator :

  • Welding Certification (preferred)
  • AA degree in Welding Technology (preferred)
  • Minimum 2 years of experience in welding and fabrication
  • AWS / CWI Certification (preferred)
  • Ability to lift, push, and pull up to 75 pounds.
  • Capability to stand and bend for extended periods of time.
Full-time
APPLY