WelderJob Category : Service Contract ActTime Type : Full timeMinimum Clearance Required to Start : NoneEmployee Type : RegularPercentage of Travel Required : Up to 10%Type of Travel : Continental US

CACI has need to add an experienced Welder / Fabricator to its technical team in Albuquerque, NM.This position requires travel in the continental United States for various projects.

The candidate should be experienced performing the following tasks.

What You’ll Get to Do :

• Perform manual tasks such as; rust treatment, painting and materials removal, metal grinding, cutting and the application of various solutions.
• Able to work independently and as part of a team, comfortable working in confined spaces and at heights.
• Maintain and adhere to operational procedures and work instructions, follow work orders and assist with preparation of reports and appropriate documentation to include following test procedures and recording results.

More About the Role :

• Does not need an active Secret clearance to start but will need to be able to obtain one at a future date.
• Possess proven problem solving skills and manage multiple priorities simultaneously.
• Ability to understand and carry out written and oral instructions.
• Use of basic powered and hand tools will be required.
• May be asked to lead a small project team, provide guidance and assistance to new or entry-level employees.

You’ll Bring These Qualifications :

GTAW / TIG welding

Shielded Metal Arc Welding

Machine Shop Equipment Operations

Fabrication Shop Machinist

• Requires experience and job knowledge of welding and procedures obtained through prior work experience or education.
• Vocational or technical education in addition to related work experience is a plus.
• Proficiency with Microsoft Office products; Outlook, Word, Excel.
• Physical abilities include the use of arms, hands and fingers to operate tools and various equipment. Standing, walking, moving, climbing, bending, crawling, reaching and handling, pushing and pulling.
• Able to focus on items less than 20 inches away (corrected or uncorrected), see in three dimensions and distinguish all colors.

These Qualifications Would be Nice to Have :

Shop Fabrication

Steel Fabrication

Structural Fabrication

Welding Fabrication

AWS certification for various metals

What We Can Offer You :

• We’ve been named a Best Place to Work by the Washington Post.
• Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.
• We offer competitive benefits and learning and development opportunities.
• We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.
• For over 55 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success.

Company Overview : At CACI, you will have the opportunity to make an immediate impact by providing information solutions and services in support of national security missions and government transformation for Intelligence, Defense, and Federal Civilian customers.

CACI is an Equal Opportunity / Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected characteristic.

TLC Plumbing & Utility is an award winning company with a life-changing culture, and we are always looking for experienced individuals to join our team.

TLC’s mission is to provide a stable work environment while being respected among our peers. This is supported by our core values of honesty, hard work, respect, compassion, and consistency.

We have helped more people obtain their license(s) than any other company in New Mexico.

Job Description

As a Welder / Fabricator you are to ensure customer satisfaction on every job through communication and hard work.

Job Requirements

• Must be proficient at Stick, TIG, and MIG welding
• Be able to physically handle the demanding work schedule and use of all different types of tools and heavy machinery
• Will need to have basic math skills, knowledge of measuring instruments, the ability to use grinders, saws, cutting torch, plasma cutters, and any other small tools need to complete the work

Benefits

• Medical Insurance
• Dental & Vision Insurance
• Employer provided Life Insurance
• 401K
• Multi-site Health Clinic
• Paid Continuing Education
• Provided Training and Certifications

Yearout Mechanical, a Legence company Yearout Mechanical is a New Mexico based company specializing in the installation of mechanical and process systems for the commercial, government, manufacturing and industrial communities of New Mexico and Texas.

Since our incorporation in August of 1964, Yearout Mechanical has consistently grown and expanded its capabilities, reaching its present position as the premier mechanical contractor in New Mexico.

What Your Job Will Be Like :

We are seeking a Pipefitter / Welder Tradesperson

On any given day, you may be called on to :

• Major Job functions include : building system operations; repair and maintenance of facilities mechanical equipment.
• Perform operations, predictive, preventive, and corrective maintenance on all types of refrigeration, air conditioning, heating, piping systems, boilers, backflow preventers, chemical treatment, testing of water systems and all associated equipment.
• Detect and mark interior and exterior mechanical utilities; layout, fabricate, install, modify, overhaul, repair, maintain, control, operate and regulate, and dismantle mechanical piping systems and fire protection systems.

This work involves use of state-of-the-art pipe locating, pipe cleaning and pipe inspection equipment.

As a condition of employment, Metal Trades positions are represented by the Metal Trades Council (MTC) and represented employees must pay the monthly membership dues or agency fee

Posting Duration :

This posting will be open for application submissions for a minimum of seven (7) calendar days, including the posting date’.

Sandia reserves the right to extend the posting date at any time.

NNSA Requirements for MedPEDs :

If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs.

If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date.

Qualifications We Require :

• Strong background in pipefitting. (minimum of 5 years experience)
• Lay-out, install, modify, overhaul, troubleshoot, repair and maintain facilities mechanical equipment.
• Work involves all types of operations, predictive, preventive, and corrective maintenance on all types of refrigeration, air conditioning, heating, piping systems, process systems, boilers, backflow preventers, chemical treatment, testing of water systems and all associated equipment;
• boilers, and interior and exterior piping systems as well as all types of plumbing fixtures, interior and exterior high and low temperature piping systems, all types of piping systems such as water, steam, condensate, sanitary, storm sewer, and natural gas and propane;

maintain and repair steam flow meters, gauges, regulators and controls.

• Utilize a computerized database to maintain required records.
• Consult with other Tradespersons and provide direction to other employees as required.
• Perform work using industry-standard safety practices and in accordance with Uniform Building Codes; demonstrate knowledge of arc, inert-gas arc, and gas welding and cutting.
• Provide chemical treatment and testing of water systems; planning and performing operations such as predictive, preventive, and corrective maintenance of air conditioning equipment, blower equipment, rotary drive compressor systems, and multistage low and high temperature chambers.
• Test and balance air systems, and align and balance equipment. Fabricate special braces, jigs, fixtures, and equipment as required.

Consult with engineers or requestors to clarify or establish specifications for building mechanical systems.

• Perform work using industry-standard safety practices; demonstrate knowledge of control systems including pneumatic, electric, and electronic microprocessor.
• Utilize a computerized database to maintain required records, and access, maintain, and operate the computerized Energy Management System.
• May consult with other Tradespersons and provide direction to other employees as required.
• Obtain EPA Proper Refrigerant Handling certification. Strong background in pipefitting.

Qualifications We Desire :

Typical experience includes minimum of 5 - 8 years as a fully qualified Mechanical Tradesman and completion of a State approved mechanical apprenticeship program.

• Experience in multiple welding processes : SMAW, GTAW, GMAW, FCAW.
• Proof of capability to maintain ASME Section IX qualification for welding, brazing and plastic fusing.
• Strong background in plumbing installation and service work.
• Ability to exercise critical thinking skills for evaluating safe working environments and troubleshooting.
• Good customer service skills and ability to interface with customers.
• Ability to work directly with engineers and project management.

Responsibilities

• Provide welding / powder coating, support in a classified environment.
• Independently fabricate, powder coat machine parts and applications for a wide variety of materials and sizes using blueprint drawings and CAD models on MIG, TIG, Powder coating booth / Oven and other equipment.

You Must Have :

• Formal training or practical experience equivalent to technical knowledge obtained in military training courses or through a two- or four-year technical degree.
• 4+ years experience in a related technical role.
• Must have, or be able to obtain a DOE Q clearance.

We Value :

• Provide machining support for the fabrication of components which range in size from miniature to very large and include common materials as well as materials with hazardous characteristics.
• Work from complex drawings, prototype sketches, electronic files and / or verbal instructions to facilitate the manufacturing of parts and assemblies by operating and a variety of general machine shop equipment.
• We are seeking an experienced Welder Fabricator to become an integral part of our team!
• We perform a variety of welding techniques.
• We're looking for someone with 2 or more years hands on experience with welding and fabrication as well as blueprint reading.

FMT2021