Precision Castparts Corp. Jobs (5)

Country United States of America State / County Nevada City Henderson Division TIMET Company Henderson Function Maintenance Workplace Type On-Site Position type Full Time Opportunity ID

8385

Company Profile

With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.

In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications;

commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries.

With such critical applications, we insist on quality and dependability not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

Job Description

Job description

PRIMARY FUNCTION : To be acquainted generally with theory and operation of electrical equipment and with maintenance, repair, adjustment, testing, and installation of such equipment.

TOOLS AND EQUIPMENT : Hand tools, power tools, test instruments and circuits, power and transportation equipment, pipe threaders, safety equipment, motor and controller test equipment, etc.

MATERIALS : Electrical hardware and supplies, apparatus, lubricants, coolants, insulation, replacement parts, wire, solder, tape, conduit, fitting, switches, relays, etc.

WORKING PROCEDURE :

• Receives and competently follows prints, diagrams, instructions and orders.
• Carries out duties of maintenance, repair, adjustment, testing, installing, dismantling, cleaning, lubricating, cooling, and heating all electrical equipment and circuits.
• Maintains, repairs, adjusts, installs, replaces and cleans motors, motor controllers and circuits.
• Makes periodic reports to supervision on condition of equipment.
• Works on hot lines as required.
• Installs conduit, fittings, switches, controls and fixtures, and wires and connects all types of electrical equipment.
• Uses safe and orderly methods and proper equipment and safety devices.
• Does electrical trouble shooting and analyzing.
• Makes emergency repairs so that plant downtime is at a minimum.
• Works in shop or field.
• Keeps record of work in log form
• Keep work areas clean.
• Crane Repairpersons who bid or move to the General Electrician occupation may be reassigned by the Company to do Crane Repair work as needed.

Experience :

Electrical knowledge : 5 years (Required)

Work Location : One location

Job Type : Full-time

Salary : From $36.44 per hour

Country United States of America State / County Nevada City Henderson Division TIMET Company Henderson Function Supply Chain / Purchasing Program Co-op Level Not applicable Opportunity ID

8225

Company Profile

Company Profile

With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.

In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications;

commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries.

With such critical applications, we insist on quality and dependability not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

Job Description

Job description

• Perform shipping tasks
• Creation of process orders
• Creation of formulation schedule
• Monitoring raw material inventory
• Project Planning has no SOPs; create departmental SOPs

Education & Experience

Enrolled in a 4-year Business Administration and Management, Entrepreneur program, Human Resources, Operations Management, Hospitality.

• Must be able to commit to 6 months or the duration of the summer a Fall extension is available. OR if Part-time desired must commit to 11 months Co-Op.
• Must be able to reliably commute or relocate.
• Ability to lift objects up to 35 pounds if needed.
• Must be able to think quickly and take action.

Required Skills

• Knowledge of related engineering discipline functional and technical skills
• Proficiency with Microsoft Office (Word, PowerPoint, Excel, Outlook, Publisher, and Access)
• Strong writing skills and interpersonal skills
• Critical problem analysis, decision making and analytical abilities.
• Ability to adapt and thrive in an environment where business and team needs may change.

Desired Skills

Demonstrated results-driven leadership. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

U.S. Person’s Status is Required (Must be a U.S. Citizen or Permanent Resident).

Must be 18 years of age or older.

Must pass all required pre-employment screenings.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Relocation

Full Relocation is authorized for this position.

Relocation

Full Relocation is authorized for this position.

Country United States of America State / County Texas City Houston Division Wyman Gordon Company Houston Function Union Workplace Type On-Site Position type Full Time Opportunity ID

9413

Company Profile

With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.

In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications;

commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries.

With such critical applications, we insist on quality and dependability not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

Job Description

Under the supervision and direction of the Instrument Maintenance Supervisor the Instrument Maintenance Technician shall provide the necessary skills to successfully conduct repairs, preventative, predictive, and condition based maintenance, Temperature Uniformity Surveys (TUS), System Accuracy Tests (SAT), furnace control instrument calibrations, and other gauge and meter calibrations, calibrate combustion systems to maintain operation of furnaces and quality control equipment in a Quality environment in accordance with quality compliance and customer procedures.

Assist in the continuous improvement of procedures, methods, and training and provide hands on technical assistance in the development and implementation of improved controls and other engineering projects as directed.

ESSENTIAL DUTIES AND RESPONSIBILITIES : This is not intended as a comprehensive list; it is intended to provide a representative summary of the major duties and responsibilities.

Incumbent(s) may not be required to perform all duties listed, and may be required to perform additional, position-specific tasks.

• Working knowledge of Programmable Logic Controllers and electro-mechanical controls a must.
• Read and interpret electrical and mechanical schematics and diagrams.
• Conduct maintenance and repair technical services for Production furnaces, Heat Treat furnaces and other quality control equipment requiring calibration and certification.
• Display sound understanding of combustion theory and application of concepts during furnace troubleshooting and repair to maintain thermal furnace characteristics and operational efficiency.
• Troubleshoot, repair and calibrate furnace control and other instruments such as the temperature recorders, temperature controllers, and high limit controllers of furnaces and other equipment requiring calibration and certification such as NDT and other test equipment using various test equipment and procedures.
• Properly fill out and return all required paperwork in conjunction with assigned tasks.
• Work in conjunction with Maintenance Planner, Leadmen, Outside Contractors, Internal Support Activities, and Supervision to complete furnace maintenance activities, major outages and installations as assigned in a correct and timely manner.
• Conduct certifications and calibrations to ensure they meet all observed specifications including working with thermocouple wire, control thermocouples, potentiometers, optical - pyrometers and gas analyzers.
• Ability to understand and comply with company procedures and work instructions.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and / or ability required (testing will be conducted).

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The successful applicant must be willing to work shift work and various shifts.

No shift preference is guaranteed.

EDUCATION AND / OR EXPERIENCE

AS in electronics and instrumentation preferred, 2-year technical training program in instrumentation and electronics. High school diploma or GED and 1-3 years related experience and / or training;

or equivalent combination of education and experience will be considered.

Desired Skills All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Welders work with minimal supervision while providing leadership to lower-level welders, weld assemblies of all levels of complexity, and materials, including stainless, 718, etc.

Welders are certified to 6G and 718 and to internal certifications. They will demonstrate the ability to read blueprints to weld and fabricate items of intermediate to advance complexity and various material types and thicknesses in and out of position.

Primary Duties & Responsibilities :

• Weld assemblies of all levels of complexity
• Intermediate to Advance TIG welding operations, i.e., corner welds
• Support Lower-Level Welders

Required Skills :

• Weld assemblies of all levels of complexity
• Intermediate to Advance TIG welding operations, i.e., corner welds
• Support Lower-Level Welders

Required Experience :

Typically, 2-5 years

Level of Education :

GED or High School diploma preferred but not required.

For informational purposes only, the range of pay for this role is $19.00 to $37.00 US Dollar (USD) Hourly based on a variety of factors.

For informational purposes only, this role is eligible to participate in the Company’s Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company’s bonus multiple, based on the Company’s performance in the applicable quarter.

Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance.

Employees are eligible to enroll in the Company’s 401(k) plan.

Country United States of America State / County California City South Gate Division Wyman Gordon Company Shultz Steel Function Operations Workplace Type On-Site Position type Full Time Opportunity ID

8846

Company Profile

With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.

In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications;

commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries.

With such critical applications, we insist on quality and dependability not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

Job Description

SUMMARY

Lays out, and cuts forged component parts according to work instruction specification and / or diagrams.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. In performing functions, duties or tasks, employees are required to know and follow safe work practices, and to be aware of Company policies and procedures related to job safety, including safety rules and regulations.

All functions, duties or tasks are to be carried out in an honest, ethical and professional manner, and to be performed in conformance with applicable Company policies and procedures.

In the event of uncertainty or lack of knowledge of Company policies and procedures, employees are required to request clarification or explanations from superiors or authorized company representatives.

Selects equipment, lays out and sets forgings according to work instructions and / or diagram using arc, gas-shielded arc, or gas welding equipment.

Maintain work area tables and all equipment including torches, lines, tanks, regulators and air arc units.

QUALIFICATIONS To perform this job successfully, an individual must be proficient with the setup and safe operation of oxyfuel cutting processes.

Operator must able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and / or ability required.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and / or EXPERIENCE

four to six years related experience and / or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

CERTIFICATES, LICENSES, REGISTRATIONS

Preferred Journeyman certificate or equivalent.

For informational purposes only, the range of pay for this role is $17 to $24 US Dollar (USD) Hourly based on a variety of factors.

For informational purposes only, this role is eligible to participate in the Company’s Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company’s bonus multiple, based on the Company’s performance in the applicable quarter.

Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance.

Employees are eligible to enroll in the Company’s 401(k) plan.