Epsilon Systems Jobs (6)

Epsilon Systems Solutions, Inc. is seeking a full time Welder II in San Diego, CA .

Summary : This position welds metal components together to design specifications or repair products, such as machine parts, shipboard equipment, according to layouts, blueprints or work orders, using SWRMC approved welding and brazing procedures with a variety of arc and gas welding equipment.

Duties and Responsibilities :

• Provides welding support certified in Gas Tungsten Arc Welding (TIG), Gas Metal Arc Welding (MIG) and Gas Metal Arc Welding Pulse (GMAW-P) using 5356 filler wire.
• Uses hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
• Welds components in flat, vertical, or overhead positions.
• Ignites torches or starts power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Clamps, holds, tack-welds, heat-bends, grinds or bolts component parts to obtain required configurations and positions for welding.
• Detects faulty operation of equipment or defective materials and notify supervisors.
• Operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, carbon arc, plasma arc, shielded metal arc, resistance welding, submerged arc welding and pipe welding.
• Ensures shop safety and housekeeping are followed
• Ensures all materials and equipment are properly and safely stored, protected, and maintained
• Reports the status and progress of all work to the government supervisor
• Alerts the government supervisor of the causes of work delays
• Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Examines work pieces for defects and measure work pieces with straight edges or templates to ensure conformance with specifications.
• Recognizes, set ups, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Lays out, positions, aligns, and secures parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Performs welding methods using a mirror.

Required Qualifications :

• High School diploma or equivalent
• Minimum 4 years work related experience
• Minimum 2 years specific experience as a qualified production welder
• Ability to obtain and maintain a DBIDS badge
• Ability to communicate verbally and electronically
• Ability to read schematics, follow detailed instructions and be self-motivated
• Ability to read, interpret, and follow detailed oral and written instructions, schematics or drawings and to conduct activities in a safe manner
• Ability to see details at close range (within a few feet of the observer)
• Ability to concentrate on a task over a period of time without being distracted
• Ability to qualify to SWRMC approved welding and brazing procedures
• Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations
• Familiar with a variety of the field's concepts, practices, and procedures
• Knowledge of Qualify Craftsman 301 for civilians
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance
• Knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models

Preferred Qualifications :

• Production welder experience while in the Navy or working as a civilian production welder supporting Navy ship repair or new construction
• Completion of a formal course of vocational or Navy welding training and certification

ADA Notifications :

• Frequent standing, sitting, crawling, kneeling, stooping, crouching, walking, handling, feeling with hands, reaching with arms
• Occasional lifting up to 50 pounds
• Noise conditions range from very quiet to very noisy
• Manual and finger dexterity; able to grasp, manipulate, assemble small objects

Epsilon Systems Solutions, Inc. is currently seeking an Electrician III in National City, CA.

Summary : Install, adjust, or maintain electronics and / or electrical equipment on board U.S. vessels / government installations in the ship repair industry.

Duties & Responsibilities :

• Inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.
• Splices wires with knives or cutting pliers, and solders connections to fixtures, outlets, and equipment.
• Installs new fuses, electrical cables, or power sources as required and locates and removes or repairs circuit defects, such as blown fuses.
• Adjusts, repairs, or replaces defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools.
• Refers to schematics and manufacturers' specifications that show connections.
• Cuts openings and drills holes for fixtures, outlet boxes, and fuse holders, using electric drills, hole saws, hole punches and routers.
• Measures, cuts, and installs frameworks and conduit to support and connect wiring, control panels, and junction boxes, using hand tools.
• Reassembles and tests equipment after repairs.
• Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.
• Troubleshoots motor controllers, control panels, and power distribution panels.
• Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.
• Assembles multi-pin connectors and fiber optic connections.
• Writes WAFS.
• Runs cable and cable installation crews, bands cables, cableway inspections and installs cable tags.
• Opens and closes MCT'S, troubleshoots, diagnoses and repairs electrical circuits and equipment such as lighting circuits, IC circuits, and controllers, transformers, and distribution systems.
• Follows NAVSEA Standard Items.

Required Qualifications :

• 4 years Naval Shipyard Electrician Apprenticeship, training in vocational schools, related on-the-job experience, and / or a high school diploma.
• Minimum of five years’ experience as a journeyman electrician in the ship repair industry, including having a supervisory or leadership role.
• Has high level experience troubleshooting, repairing and testing of electrical powered equipment, electrical connections, fiber optics, cableways, transformers, motor controllers, lighting, completing connection / disconnection cut sheets.
• Has a specialized skill in one or more of the following, circuit breaker repair, generator cleaning and repair, voltage regulator repair, control circuit repair, blown fiber certified.
• Understands and is familiar with NAVSEA Standard items.
• Ability to work from blueprints, drawings, sketches or layouts in standard English text. Basic knowledge of techniques, materials, tools and equipment used.
• Knowledgeable in electrical and electronic theory and NEC code, low / high Voltage systems, Lockout / Tag-out procedures and in Safety of Electrical Operations.
• Able to obtain and maintain access to military and government installations and private shipyards.

Skills :

• Must have hook up and disconnection skills.
• Effective oral and written communication.
• Sound interpersonal skills needed to interface, coordinate with company personnel, customers, and outside contacts, if appropriate.

Abilities :

• Able to interpret shipboard connection DWG, understands and can follow NAVSEA Standard Items, has 3-4 years shipboard experience preferred.
• Ability to use electronic theory (analog and digital, RF knowledge a plus), to use common laboratory electronic test equipment and to work from schematics and rough sketches.
• Able to use test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and computer control equipment.
• Able to exercise good judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow.
• Ability to read, interpret, and follow detailed written instructions, schematics or drawings and to conduct activities in a safe manner.
• Ability to see details at close range (within a few feet of the observer).
• Make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state

Preferred Qualifications :

Fiber and copper connection qualified.

ADA Notations :

• Requires walking, reaching, sitting and concentration in the presence of occasional noise.
• Able to move in narrow and restricted passageways, up / down steep and narrow ladders or stairways, and up and down antenna masts / yardarms (on board ships).
• Able to lift, carry and move objects up to 50 lbs in weight.
• Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
• Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
• Able to perceive and distinguish normal range of colors.
• May be required to wear personal protective equipment (PPE) including but not limited to : hard hat, safety glasses / goggles, ear plugs / muffs, masks / respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is currently seeking a full-time Electrician Specialist in National City, CA.

Summary : Requires no supervision and is an expert in all tasks and qualifications required as an Electrician. Performs electrical and electro mechanical repairs.

Assist with conducting system grooms and checkouts, and configuration validation. Prepare and install systems alterations.

Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery.

Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking / reading comprehension, and frequent travel / overtime are required.

Work outside specific trade discipline is required.

Duties & Responsibilities

Once assigned to a project, this position reports directly to the project Foreman in the performance of his / her responsibilities.

In the absence of the Foreman, he / she will report to an individual designated by the Foreman. These responsibilities include but are not limited to the following :

• Strict adherence to corporate, federal, state and local safety regulations and ensuring that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
• Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
• Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and / or other guidance given by management.
• Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.

required to complete the production operations.

Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.

Coordinates the efforts of other trades during an installation, modification or repair operation.

Performs component and / or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.

Performs and / or verifies mechanical alignments.

Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.

Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.

g.; controllers, switches, pumps, etc.).Performs component and / or system troubleshooting to diagnose problems.

• Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
• Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.

e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).Prepares and installs equipment or system alterations in accordance with the technical specifications.

Leads and perform shipboard work for system / component evaluations.

Requirements :

• High school diploma or equivalent or vocational training.
• At least 10+ years’ experience as a marine electrician.
• Understand and is familiar with NAVSEA Standard items.Experienced in the performance of Energized Circuit work.
• Advanced knowledge of AC and DC electrical theory, power generation, control and distribution.
• Qualified in a minimum of two of the following processes : copper multi-pin connector assembly or repair, Fiber Optic connector assembly, Fiber Optic repair and testing / troubleshooting.

Soldering of electrical / Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.

• Ability to communicate effectively, and work independently or in a group.
• Ability to do basic math, i.e. add, subtract, divide and multiply.
• Ability to read, ability to write, ability to speak, and ability to comprehend English.
• Must be able to follow complex repair procedures and instructions required to complete all electrical production operations.
• Must be able to expertly perform installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.
• Must be able to accurately perform component and / or system troubleshooting to diagnose problems first time thorough.
• Must be able to assist with the performance of on-site electrical service for system grooms and checkouts, minor repairs, connectorization, and system configuration validation.
• Ability to reason and find solutions.
• Able to obtain and maintain access to military and government installations and private shipyards worldwide.
• Ability to travel required.

ADA Notations :

• Requires walking, reaching, sitting and concentration in the presence of occasional noise.
• Able to move in narrow and restricted passageways, up / down steep and narrow ladders or stairways, and up and down antenna masts / yardarms (onboard ships).
• Able to lift, carry and move objects up to 50 lbs in weight.
• Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
• Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
• Able to perceive and distinguish normal range of colors.
• May be required to wear personal protective equipment (PPE) including but not limited to : hard hat, safety glasses / goggles, ear plugs / muffs, masks / respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. and its subsidiaries are proud Equal Employment Opportunity and Affirmative Action employers, Minority / Female / Disabled / Veterans.

Epsilon Systems Solutions, Inc. is currently seeking a full-time Electrician I in National City, CA.

Job Summary : Under immediate supervision, assist in a variety of electrical trade functions such as the installation, maintenance, or repair of electronics and / or electrical equipment for the generation, distribution, or utilization of electrical energy onboard U.

S. vessels / government installations. Non-supervisory.

Duties & Responsibilities :

• Inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.
• Splices wires with knives or cutting pliers, and solder connections to fixtures, outlets, and equipment.
• Installs new fuses, electrical cables, terminal boxes, switches, lighting or power sources as required and locate and remove or repair circuit defects such as blown fuses.
• Adjusts, repairs, or replaces defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools.
• Refers to schematics and manufacturers' specifications that show connections.
• Cuts openings and drills holes for fixtures, outlet boxes, and fuse holders, using electric drills, hole saws, hole punches and routers.
• Measures, cuts, and installs frameworks and conduit to support and connect wiring, control panels, and junction boxes, using hand tools.
• Reassembles and tests equipment after repairs.
• Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.
• Assembles multi-pin connectors and fiber optic connections.
• Runs cable and cable installation crews, bands cables, cableway inspections and installs cable tags,
• Opens and closes MCTS, troubleshoot, diagnose and repair basic electrical circuits and equipment such as lighting circuits, IC circuits, and controllers, transformers, and distribution systems.
• Follows NAVSEA Standard Items.

Required Qualifications :

• High school diploma or equivalent, four-year Naval Shipyard Electrician Apprenticeship, training in vocational schools, or an associate's degree in related field.
• One to three-years’ experience as a journeyman electrician in the ship repair industry.
• Basic knowledge of techniques, materials, tools and equipment used in the electrical trade.
• Basic knowledge in electrical and electronic theory and NEC code, low / high Voltage systems, Lockout Tag-out procedures and in Safety of Electrical Operations.
• Must have hook up and disconnection skills.
• Effective oral and written communication skills.
• Sound interpersonal skills needed to interface, coordinate with company personnel, customers, and outside contacts, if appropriate.
• Able to obtain and maintain access to military and government installations and private shipyards.

Abilities :

• Able to interpret shipboard connection DWG, understands and can follow NAVSEA Standard Items has 3-4 years shipboard experience preferred.
• Ability to use electronic theory (analog and digital, RF knowledge a plus), to use common laboratory electronic test equipment and to work from schematics and rough sketches.
• Able to use test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and computer control equipment.
• Able to exercise good judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow.
• Ability to read, interpret, and follow detailed written instructions, schematics or drawings in the English language.
• Able conduct activities in a safe manner.
• Ability to see details at close range (within a few feet of the observer).
• Make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations.
• Works from blueprints, drawings, sketches or layouts.

Preferred Qualifications :

Fiber and copper connection qualified.

ADA Notations :

• Require walking, reaching, sitting and concentration in the presence of occasional noise.
• Able to move in narrow and restricted passageways, up / down steep and narrow ladders or stairways, and up and down antenna masts / yardarms (onboard ships).
• Able to lift, carry and move objects up to 50 lbs. in weight.
• Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
• Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
• Able to perceive and distinguish normal range of colors.
• Work is done in various settings : Office, Warehouse, laboratory, pierside, shipboard where noise conditions range from very quiet to loud noise.
• May be required to wear personal protective equipment (PPE) including but not limited to : hard hat, safety glasses / goggles, ear plugs / muffs, masks / respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions Inc. and its subsidiaries are proud to be Equal Employment and Affirmative Action employers, Minority / Female / Disabled / Veterans.

Epsilon Systems Mission Readiness Group is currently seeking a full-time Welder III in National City, CA.

Position Summary :

Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.

Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments.

Duties and Responsibilities :

Reports to the Resource Manager. Once assigned to a project, reports directly to the project Foreman in the performance of his / her responsibilities.

In the absence of the Foreman, he / she will report to an individual designated by the Foreman.

• Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
• Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
• Reads and understands Epsilon Systems Mission Readiness Group PPE Policy.
• Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.
• Laysout material prior to performing machining operations to prevent possible errors.
• Machines parts to close tolerances ensuring finish requirements of the drawings are achieved.
• Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
• Returns tools / equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant in accordance with Epsilon Systems Mission Readiness Group Instructions.
• Qualifies as a Welder in accordance with Epsilon Systems Mission Readiness Group Instructions.
• Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and / or other guidance given by management.
• Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.
• Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
• Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.
• Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process / procedure to ensure quality welding operations IAW TWD.
• Ensures control and assumes responsibility for Level I material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.
• Expertly performs all tasks required as a Welder.
• Provides mentoring to junior craftsman.
• Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures / procedures.
• Performs work outside of trade if necessary.

Required Qualifications :

• 5 years’ experience as a welder.
• High School / GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and / or military and / or civilian experience with welding operations in a repair department or shipyard or fabrication shop.
• Qualifies as a Welder / Workmanship Inspector in accordance with Epsilon Systems -Mission Readiness Group Work Instructions and welding procedures.
• Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.
• Must be qualified in a minimum of 15 welding / brazing processes to include flux core welding.
• Must be able to obtain / maintain access to military and government installations and private shipyards.
• Ability to communicate effectively, work independently or in a group.
• Ability to do basic math, i.e. add, subtract, divide and multiply.
• Ability to read, write, speak, and comprehend English.

ADA Notations :

• Frequent standing, sitting, crawling, kneeling, stooping, crouching, walking, handling, feeling with hands, reaching with arms.
• Regular communication (hearing / speaking).
• Occasional lifting up to 50+ pounds.
• Noise conditions range from very quiet to very noisy.

Epsilon Systems Solutions, Inc. is currently seeking a full-time Welder I in National City, CA.

Summary : Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

Duties and Responsibilities :

• Operates safety equipment, and uses safe work habits.
• Welds components in flat, vertical, or overhead positions.
• Ignites torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Clamps, holds, tack-welds, heat-bends, grinds and / or bolts component parts to obtain required configurations and positions for welding.
• Detects faulty operation of equipment and / or defective materials, and notify supervisors.
• Operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Examines work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with specifications.
• Recognizes, sets up, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Lays out, positions, aligns, and secures parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.

Required Qualifications :

• High School Diploma or equivalent.
• 1 to 2 years previous work-related skill, knowledge, or experience.
• Must be able to obtain / maintain access to military and government installations and private shipyards.
• Knowledge of a wide range of welding principles, processes, and difficult techniques requiring complete penetration and fusion of base and filler metals.
• Ability to maintain dimensions and tolerances to specifications, weld dissimilar metals, weld parts and structures that vary in size, shape and thickness.

Preferred Qualifications :

• Certification and experience as a forklift and man-lift operator.